[Bluetooth5.1, 8D Hifi Surround] TWS Wireless Bluetooth Earphones-Complete Features/User Manual

[Bluetooth5.1, 8D Hifi Surround] TWS Wireless Bluetooth Earphones

Specifications

• BLUETOOTH SPECIFICATION: V5.1
• BLUETOOTH PROFILE: A2DP, AVRCP, HFP; HSP
• WORKING VOLTAGE: 3.1V~4.2V
• CHARGING VOLTAGE: 5V-1A
• BATTERY CAPACITY OF THE HEADSET: 50MAH
• BATTERY CAPACITY OF THE STORAGE BOX: 200/500MAH
• TRANSMISSION DISTANCE: >10M
• CALL TIME: 4-5h
• PLAYTIME: 4-5h
• WATERPROOF: IPX5
• CHARGING TIME OF HEADSET: 1 h
• CHARGING TIME OF THE CHARGING BOX: 2h
• SUPPORT SYSTEM: All Bluetooth devices and mobile phones

Introduction

It has a unique touch control capability that allows you to play/pause music and answer calls, double-tap to skip forward/backward, and flick three times to adjust the level. It is simple to control without using the phone. Pick up two headsets from the charging case, and they will instantly connect, allowing you to pair the earphones with your phone in just one step.

It has a Playtime of 24 Hours with a Charge Case. On the go charging on a single charge, the Bluetooth wireless earbuds provide 45 hours of playback, with an additional 18 hours in the tiny charging case. The Air bud charge case has an LED display that allows you to check your battery consumption at any time. It is a Lightweight and a secure fit Each earbud is only 4 grams in weight. These Bluetooth in-ear headphones feature an ergonomically designed design that provides a comfortable and snug-fitting listening experience.

PRODUCTS INCLUDE

• 1 * One pair of Bluetooth headsets
• 4 * Ear cap
• 1 * Charging cable
• 1 * User Manual
• 1 * Charging box

HOW TO SET UP

The first step is to simultaneously long press both sides of the multi- function buttons until the red and blue leds flash. Then long press EITHER earbud to pair; a reminder voice will play; ready to pair. To start, make sure your smartphone’s Bluetooth is turned on.

Frequently Asked Questions

• What are your favorite ways to utilize TWS wireless Bluetooth headphones?
  On your phone, enable the Bluetooth pairing mode. To connect, tap “Air +.” When connected correctly, the right earphone will respond with a voice prompt: “CONNECTED” and a blue light will flash. When the earbuds are turned on, they automatically connect to the last associated phone.

• Why isn’t my TWS pairing?
  Step 1: Remove the pairing information for the left and right earbuds (Reset the i12 TWS). 5 times press the power button in pairing mode until the LED turns red. Step 2: To turn on the i12 TWS, hold down the function key for 5 seconds. Step 3: Go into pairing mode, which takes around 5 seconds, and listen for the prompt tone “pairing mode.”

• What is the procedure for changing the language on TWS earbuds?
  Press one earphone side until a beep is heard. Step 9. Touch the touch panel six times and it will announce “English,” indicating that the language has been successfully changed to English. After completing the language transition, turn on your phone’s Bluetooth and pair them for use.

• What is the procedure for turning on my TWS headphones?
  To turn on each earphone, press and hold the power/pairing button for up to 2-3 seconds. A voice prompt with “Power On” will be heard.

• What is the best way to control the volume on my TWS earbuds?
  The Creative Outlier Air TWS earbuds provide direct volume control, which is simple to use. Turn down the volume by pressing and holding the left earpiece. Turn up the volume by pressing and holding the right earbud.

• What is the best way to charge TWS earbuds?
  It’s dubbed “True Wireless Earbuds” since it connects without using a cable. However, you must charge your case using a USB or Type-C cable.

• What is the procedure for resetting TWS earbuds
  Remove the earbuds from the case and press and hold the buttons until they turn off. Hold down the buttons on both earbuds for roughly 5 seconds, starting with the earphones in the OFF position. The LEDs will become white for around 5 seconds before turning off. Your earphones will be reset.

• How can you simultaneously connect both earbuds?
  The two Bluetooth headsets must be paired at the same time; otherwise, only one will pair. 1- push both buttons until a blue flashing light appears (don’t stop pressing when alternating blue/red lights appear). 2. Open Bluetooth on your phone and search for tws-k2, then select one of them to pair.

• Why aren’t my earbuds pairing properly?
  If your headphones’ battery is low, they may have difficulties pairing—and I’ve even discovered that certain Bluetooth headphones stay turned on when in the case, causing them to deplete faster than you expect. Even if they say they have some battery remaining, try putting them in and charging them completely before pairing.

• Why does only one of my earbuds work?
  Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>