alza power APW-PBS20PDB Power Bank Shine User Manual
- October 30, 2023
- alza power
Table of Contents
User Manual
Power Bank Shine PBS20PDB
APW-PBS20PDB
THANK YOU FOR CHOOSING US!
We value your trust. We hope that you will be happy with our product, and as
excited about it as we are. We try to offer products of the highest quality
that satisfy even the most demanding requirements. If you are satisfied, it
would make us very happy if you chose us again the next time you make a
purchase.
We are environmentally conscious, therefore we use special eco-friendly
packaging. Please recycle!
Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they
are absolutely necessary to protect the product. So how are we different?
Packaging you can eat… Well, almost. 🙂
We use ink made from soybeans as opposed to classic petroleum-based ink.
The majority of our packaging is made from 100% recyclable paper.
We limit the use of adhesives. If absolutely necessary, we make sure to choose
only water-soluble ones.
We think globally, which means that we actively search for eco-friendly
solutions. We keep an eye on trending technology and place findings of the
scientific community into practice.
We don‘t just try to meet quotas and mandates, we aim to exceed them.
TECHNICAL SPECIFICATIONS
| Battery capacity | 20000 mAh |
|---|---|
| Battery type | Li-Ion / 3.7 V / 74 Wh |
| Charging time | 4.5 hours |
| Total maximum output | 20 W (max) |
| USB-C (input) | 5 V/2.4 A; 9 V/2 A (max. 18 W) |
| Micro USB (input) | 5 V/2 A; 9 V/2 A (max. 18 W) |
| USB-A1/USB-A2 (outputs) | 5 V/3 A; 9 V/2 A; 12 V/1.5 A (max. 18 W) |
| USB-C (output) | 5 V/3 A (QC); 5 V/2.4 A (PD); 9 V/2.2 A; 12 V/1.6 A (max. 20 |
W)
Support for fast charging| PD 2.0/3.0, Qualcomm Quick Charge 3.0, FCP, AFC,
MTK PE+2.0, BC 1.2, Apple 2.4 A
Dimensions| 139 x 100 x 31.5 mm
Weight| 493 g
Operating temperature| 0-35 °C
Storage temperature| 0-35 °C
Operating humidity| 35-85 %
Storage humidity| 35-85 %
OVERVIEW
- Cover for the input/output ports
- Power button
- LED power bank charge status indicators
INSTRUCTIONS
Checking the power status of the power bank
It is necessary to check the status of charge of the power bank before
charging a device. Briefly press the power button and it will light up
depending on its charge:
- one LED indicator: the power bank is charged to <25%;
- two LED indicators: the power bank is 25-50% charged;
- three LED indicators: the power bank is 50-75% charged;
- four LED indicators: the power bank is charged to >75% charged.
If no LED is displayed after pressing the button, the power bank is completely discharged.
Charging the power bank
Charge the power bank before using it for the first time. We recommend
checking the charge status of the power bank before each use.
Plug one end of the charging cable into the USB-C or Micro USB port of the
power bank and the other end into the USB port of your notebook or AC adapter
(100-240 V ~; adapter not included).
Depending on the state of charge of the power bank, the corresponding number
of LEDs will light up and another LED in the row will flash. As the power bank
charges, all LEDs will flash and light up. When all the LEDs light up, the
power bank is fully charged.
When charging is complete, disconnect the power bank. The charging time
depends on the charger used. If the power bank will not be used for a long
time, charge / discharge it to 50% of its capacity and check its charge level
regularly.
Device charging
You can charge the device with USB-A or USB-C ports of the power bank. Plug
one end of the power cord into a USB port on your device and the other end
into the USB port on the power bank. Depending on the state of charge of the
power bank, the corresponding number of LEDs will light up and the last LED in
the row will flash. As the connected device charges, the LED indicators will
gradually turn off.
INSTRUCTIONS
Spotlight function
Press the power button briefly repeatedly to turn on the spotlight and adjust
its brightness in the following order: brightest — bright — slightly dim —
dim.
To adjust the colour of the spotlight, press the power button for about 2
seconds and adjust the colour in the following order: white light — yellow
light.
SOS warning signal: Press and hold the power button for 4 seconds.
SAFETY INFORMATION
- Read the safety and operating instructions. Failure to observe the safety and operating instructions can endanger people or damage the device.
- This product is only suitable for household use.
- Use and store the product out of the reach of children. Children must not use this product.
- This product is designed to charge digital device batteries. Use it only in accordance with the instructions in this operating manual. Do not use the product for purposes other than those for which it is intended.
- This product does not contain parts repairable by the user . In the event of a malfunction or defect contact the nearest authorized service center. Check the product or its accessories regularly for damage.
- It is forbidden to use a damaged product or its accessories.
- Always disconnect the interface cable when the product or connected digital device is fully charged. Do not leave the cable plugged in.
- If you will not be using the product for a long time, we still recommend charging it regularly (at least once every six months). This will extend its life.
- Keep this product away from heat sources such as stoves or direct sunlight. No naked flame sources, such as lighted candles, should be placed on the product.
- Do not expose the product to dripping or splashing water or other liquids. Do not place containers filled with water, such as vases, on the product.
- Do not expose the product to extreme temperatures, dust or dirt.
- Do not immerse the product in water or other liquids or throw it into a fire.
- Do not use or store the product near materials / objects that could ignite, flammable or explosive substances, etc.
- Do not leave the product unattended while it is in operation.
- While the product is in operation, ensure that there is sufficient free space around it for proper air circulation. Use the product only on a flat and firm surface. Do not use it on a table with a tablecloth, on a worktop on a dish towel, on a carpet, etc. Never cover the product.
- Do not insert any objects (such as wires or other objects with metal terminals) into the product’s jacks.
- Do not short-circuit, disassemble or otherwise mechanically damage the product.
- While the product is in operation, it may become hot. This is a normal occurrence. Therefore, make sure that there are no heat-sensitive objects / surfaces near the product.
- If you notice an unpleasant odor or smoke while using the product, unplug the product immediately and stop using it. Contact an authorized customer centre.
- Avoid overloading the product. Avoid dropping the product.
- Do not place any objects on the product. There is a risk of irreversible damage to the product.
- If you have transported the product when cold, wait until the temperature of the product has equalized before using it.
- Use only a clean, dry cloth to clean the product. Do not immerse the product in water or other liquids to wash it. Do not use any chemical cleaners, abrasives, gasoline, thinners or other similar substances. Before cleaning, make sure that the product is disconnected from the power supply.
- Store the product in a dry and well-ventilated place. Do not place any objects on the product when in storage.
http://hm.xiaomi.com/app.do
Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic
© 2023 Alza.cz a.s. All Rights Reserved.