alza ergo APW-EGOCA1B Office Chair ABYSS 1 User Manual
- October 30, 2023
- alza ergo
Table of Contents
alza ergo APW-EGOCA1B Office Chair ABYSS 1
PARTS LISTINSTALLATION
SETUP
PURPOSE AND USE
This office chair is designed for use in homes and offices. Height adjustable piston
- Refer to the illustrations on pages 4 and 5 of this manual for full instructions on operating the piston.
Attention: The positioning mechanism may only be adjusted and adjusted by qualified and properly trained personnel.
Wheels
- The chair is equipped with hard wheels for soft surfaces (carpet). Soft, extra-quiet wheels for hard floor types (floating or wooden floors, tiles, marble, concrete, etc.) are available separately as an optional accessory.
- Remove dirt and dust from the wheels regularly with a damp cloth to prevent minor damage to the floor (especially floating or wooden floors).
CARE AND MAINTENANCE
Recommendations for long life
-
We recommend that you use only high quality products designed for the type of fabric you are using. Using an unsuitable product or other chemical can seriously and irreversibly damage the surface! Always test in a less visible area before applying any product.
Regular maintenance significantly extends the life of the cover. We therefore recommend vacuuming once a week to remove dust parti- cles. Complete cleaning should then be carried out (depending on the intensity of use) 1-2 times a year.
Remove any stains immediately after they occur! -
Never place newspapers, magazines or wet clothes on the chair. Textile and newspaper dyes can penetrate and discolour the surface of the fabric.
-
Do not expose the chair to direct sunlight or any other strong light source! This prevents the colour of the cover from changing shades.
-
Do not place the chair in a humid environment or too close to a radiator or other heat source. The minimum recommended distance be- tween the chair and the heat source is 30 cm.
-
Protect the chair from pets. Their claws, saliva and bodily secretions can irreparably damage the chair surface.
Instructions for regular maintenance
- Wipe plastic surfaces with a soft, clean cloth or maintain with non-aggressive agents. We recommend cleaning and care products for vehicle interior maintenance that are suitable for plastic, rubber or other artificial surfaces.
- It is recommended to regularly dust the fabric covers with a vacuum cleaner. If necessary, arrange for professional technical cleaning or clean with a suitable mild foam-based product. Apply the foam to the soiled area, leave it on and then vacuum or dry with a soft cotton cloth. The cover should not become too deeply wet during cleaning. After cleaning, allow to dry thoroughly before further use! Do not klawdrs
WARNING! NEVER USE FOR MAINTENANCE:
- Aggressive chemical cleaners
- Abrasive pastes and shoe cleaners
- Hard mechanical brushes
- Solvents and chemicals
- Dish washing detergents
- Alcohol-based cleaners
Co. Reg. No. 27082440 Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic © 2023 Alza.cz a.s. All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>