alza power APW-PS400V2 Portable Power Station User Manual

: October 30, 2023
: alza power

Table of Contents

TECHNICAL PARAMETERS
OVERVIEW
DISPLAY
INSTRUCTIONS
CLEANING AND STORING
FREQUENT QUESTIONS
SAFETY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

alza power APW-PS400V2 Portable Power Station User Manual

THANK YOU FOR CHOOSING US!

We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase.

We are environmentally conscious, therefore we use special eco-friendly packaging. Please recycle!

Recycling and Environmental Protection

We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?

Packaging you can eat… Well, almost. 🙂

We use ink made from soybeans as opposed to classic petroleum-based ink.
The majority of our packaging is made from 100% recyclable paper.
We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones.

We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place findings of the scientific community into practice.
We don‘t just try to meet quotas and mandates, we aim to exceed them.

THIS PACKAGE IS 100% RECYCLABLE

TECHNICAL PARAMETERS

Capacity	1228.8 Wh (3.2 V/384 800 mAh)
Input	AC
XT60 (for solar panel)	12–30 V/max. 10 A (max. 300 W); built-in solar

charging controller MPPT
DC 5521| 12–30 V/max. 7 A (max. 200 W)
Inverter waveform| Pure sine wave
AC outlet| Rated power: 1,000 W| 220–240 V~, 50 Hz
Peak power: 2,000 W
2× USB-C output| PD 100 W (5,0 V/3,0 A; 9,0 V/3,0 A; 12,0 V/3,0 A; 12,0 V/3,0 A; 15,0 V/3,0 A; 20,0 V/5,0 A, max. 5 A)
4× USB-A output| QC3.0 (5 V/3 A; 9 V/2 A; 12 V/2 A) for 1 output; max. 18 W
1x cigarette connector| 13.6 V/8 A, max.108.8 W| Total share 8 A max.
2x DC5521| 13.6 V/8 A, max.108.8 W

OVERVIEW

Overview

DC button Turns the DC power on/off..
DC output connectors Connect to DC powered devices.
Cigarette connector Used to connect the cigarette connector.
DC input connector Used to connect to a DC station charging adapter
AC input connector Used to connect to AC station charging adapter.
Solar panel inputs Used to connect the station charging adapter from a solar panel
AC button Used to turn on/off AC power.
Power outlets Used to connect the power plug of an electrical appliance.
Display Displays station operating status data.
USB button Turns on / off charging the device via USB.
4x USB-A port QC3.0
2x USB-C port PD100W
Main power switch Used to turn on / off the station.
Grounding connector

DISPLAY

Battery status icons| | Charge status in %| | Battery failure message
---|---|---|---|---
| Charge status| | Battery high / low tem- perature notification
**| Battery lock|
Input icons| **| AC current input| | DC current input
| Solar panel input| **| Indication of current power input
Output icons| **| AC output| | DC input / cigarette connector
| USB-A/USB-C output| **| Indication of the current output power
Remaining time icons| **| Discharge / full charge time indicator| | Minutes
| Hours
Station protec- tion icons| | System error indicator| | High temperature protec- tion indicator
| High temperature indicator| | Overload protection indicator
****| Low temperature indi- cator|

INSTRUCTIONS

Only charge the station with the supplied charging adapter. Charge the station fully before use. Input connectors intended for charging are:

AC input connector for charging from an AC outlet; super fast charging (max. power 600 W);
XT60 input connector for charging from the solar panel (solar panel not included); or
input connector DC5521 for charging e.g. from a car battery.

Note:
If you will not be using the station for a long time, we still recommend charging it regularly, at least every 3 months. This will extend the life of the built-in battery.

Serial / parallel charging via solar panel
The portable station supports charging via a solar panel with a maximum output of 200 W.
The solar panel is not included in the package and must be purchased separately, including a connecting cable, which will be equipped with a terminal suitable for connection to the station. This is the only way to achieve fast and efficient charging.

WARNING:
The maximum voltage of the solar panels that the portable station supports is 30 V and the maximum current is 7 A.

Attention:
The portable station must be charged via solar panels with a voltage of less than 30 V.
An input voltage exceeding 30 V can seriously damage the station.

Station use – alternating current

The portable station allows to supply up to 4 appliances with alternating current at the same time, provided that the total power output does not exceed 1,000 W.

Press and hold the power switch to turn on the station. The power switch indicator and the display light up. The station switches to standby mode.
Insert the plug of the appliance into the power outlet in the station.
Press the AC button to turn on the AC power for the appliance.
After use, press the AC button to turn off the power. The station switches to standby mode. Unplug the appliance from the power outlet.
To switch off the station completely, press and hold the main switch.

Station use – direct current

Press and hold the power switch to turn on the station. The power switch indicator and the display light up. The station switches to standby mode.
Plug the cable end of the device you want to charge to the DC connector.
Press the DC button to turn on the DC power of the device.
After use, press the DC button to turn off the power. The station switches to standby mode. Pull out the connector from the port.
To switch off the station completely, press and hold the main switch.

Station use – USB output

Press and hold the power switch to turn on the station. The power switch indicator and the display light up. The station switches to standby mode.
Press the USB button to turn on the device via USB.
Plug the end of the USB connecting cable into the USB port. Plug the other end of the USB connecting cable into a port on your device.
After use, press the USB button to turn off the power. The station switches to standby mode. Pull the terminal out of the USB port.
To switch off the station completely, press and hold the main switch.

Use of the UPS backup function

Connect the portable station to the power outlet using the supplied power adapter. The station turns on automatically and starts charging.
Plug the appliance into the power outlet in the station.
Press the AC button to start the alternate current. The connected equipment enters UPS backup mode.
If you disconnect the portable station from the electrical outlet, the station will continue to supply power to the connected device.

Attention:
Make sure that the portable station is plugged into a properly grounded AC outlet with a stable and normal voltage.

To ensure that the UPS backup function is used correctly, the total power of the connected devices must be less than 800 W. If the power is greater than 800 W, the portable station will automatically shut down power and charging from the electrical outlet and will only supply power to the connected devices.

CLEANING AND STORING

Keep the portable station clean. Before cleaning, make sure that the station is disconnected from the power supply and that all connectors of the connected devices are disconnected.
Use only a soft, dry cloth to clean the station. Do not use a cloth soaked in clean water or water containing detergent to clean it.
If the station is very dirty, we recommend using a piece of cotton swab with a small amount of high-percentage pure alcohol to wipe the surface of the station. Do not use chemicals, harsh cleaners, solvents, gasoline or other similar substances to clean the portable station.

Warning:
Never immerse the portable station in water or any other liquid. Do not rinse the portable station under running water or any other liquid.

Storage
If you are not going to use the portable station, store it in a dry and well- ventilated place.
Charge the portable station regularly, at least once every three months. This will extend the life of the built-in battery

FREQUENT QUESTIONS

Question	Answer
Is it possible to take the station on board a plane?	No. The station contains

a lithium battery and according to the valid international rules of air transport, only equipment with a lithium battery with a total power not exceeding 100 W can be transported on board the aircraft.
It does not charge the station, even though the total power of the connected devices is within the total power of the station.| The station is not fully charged. Charge it and then you can use it.
The station emits noises sometime.| The station is equipped with an air cooling sys- tem. This makes it easier for the built-in fan to dissipate heat, so you may hear the sound of the fan during use. This is a normal occurrence.

SAFETY INFORMATION

This product is for domestic use only.
This product is not a toy. It may contain small components. Please keep away from children.
Read the operating instructions carefully before use.
Please check compatibility with the information specified on the product before use.
Unplug the product from power sources when not in use.
Only use the product for the specified purpose of use.
Take extra care when using the product near children.
Incorrect use of the product can lead to a risk of fire, explosion or other hazard and can result in a voided warranty.
Do not insert fingers, hands or objects into any openings in the product.
Use only accessories supplied with the product or recommended by the manufacturer. Otherwise, there is a risk of fire, electric shock or injury.
Use only the supplied adapters to charge the product.
When charging and using the product, ensure that there is sufficient free space around the product for proper air circulation.
Under no circumstances should you cover the product while it is charging or you are using it.
Do not use or leave the product in dusty or otherwise contaminated environments.
Do not expose the product to high temperatures or low temperatures. Keep the product in a dry environment.
Do not expose the product or its accessories to moisture or immerse them in liquids. Do not expose them to dripping or splashing water. Do not place water containers, such as vases, on them.
Do not expose the product or its accessories to fire, excessive heat or direct sunlight. It is forbidden to place sources of open fire on them, such as burning candles.
Do not use or store the product in places where open flames are used, where flammable or explosive substances are used or stored.
Do not disassemble, damage or short-circuit the product. Attempting to modify the power bank may damage the product and result in a serious injury.
Do not use the product if it is damaged or emits a suspicious odour.
If battery fluid leaks, avoid direct contact with both fluid and battery. In case of skin contact, rinse the area with plenty of clean water. In case of contact of the liquid with eyes, seek medical help immediately.
If the product needs to be repaired or maintenance is required that cannot be performed by the user, contact an authorized service center. The product does not containparts serviceable by the user. Improper handling of the product may result in a risk of fire or electric shock.
Use a soft, clean, dry towel for cleaning the surface of the product.
Do not disassemble the product. Attempting to modify the power bank may damage the product and result in a serious injury