alza power APW-PBM40PD100 Power Bank 40 000 mAh User Manual
- October 27, 2023
- alza power
Table of Contents
alza power APW-PBM40PD100 Power Bank 40 000 mAh
THANK YOU FOR CHOOSING US!
We value your trust. We hope that you will be happy with our product, and as
excited about it as we are. We try to offer products of the highest quality
that satisfy even the most demanding requirements. If you are satisfied, it
would make us very happy if you chose us again the next time you make a
purchase.
We are environmentally conscious, therefore we use special eco-friendly
packaging. Please recycle!
Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?
Packaging you can eat… Well, almost. 🙂
- We use ink made from soybeans as opposed to classic petroleum-based ink.
- The majority of our packaging is made from 100% recyclable paper.
- We limit the use of adhesives. If absolutely necessary, we make sure to choose only wa-ter-soluble ones.
We think globally, which means that we actively search for eco-friendly
solutions. We keep an eye on trending technology and place findings of the
scientific community into practice.
We don‘t just try to meet quotas and mandates, we aim to exceed them.
TECHNICAL PARAMETERS
Battery capacity | 40000 mAh |
---|---|
Battery type | Li-ion 40 000 mAh |
Charging time | 15 hours |
Total maximum output | Max. 100 W |
USB-A (output) | Output: 5 V/3 A; 9 V/2 A; 12 V/ 1.5 A (max. 18 W) |
USB-A (output) | Output: 5 V/3 A; 9 V/2 A; 12 V/ 1.5 A (max. 18 W) |
USB-C (input/output) | Input: 5 V/3 A; 9 V/3 A; 12 V/3 A;15 V/3 A; 20 V/5 |
A (max. 100 W)
Output: 5 V/2.4 A; 9 V/3 A; 12 V/3 A;15 V/3 A; 20 V/5 A (max. 100 W)
MicroUSB (input)| Input: 5 V/2 A; 9 V/2 A (max 18 W)
Support for fast charging| PD 2.0/3.0, Qualcomm Quick Charge 3.0
Dimensions| 188 × 93 × 25 mm
Weight| 774 g
Operating temperature| -20-60 ºC
Storage temperature| -5-35 °C
Operating humidity| up to 70 %
Storage humidity| up to 75 %
OVERVIEW
- USB-A port (output)
- USB-C port (input/output)
- MicroUSB port (input)
- LED power bank status indicator
- Power bank charge check button (ON/OFF)
INSTRUCTIONS
Checking the power status of the power bank
Before charging your device, you should check the charge status of the power
bank. Press the power bank charge check button and read the current charge
status from the LED indi-cator. When:
- one LED indicator lights up: the power bank is charged to <25%;
- two LED indicators light up: the power bank is 25-50% charged;
- three LED indicators light up: the power bank is 50-75% charged;
- four LED indicators light up: the power bank is more than 75% charged.
If no LED indicator lights up when the control button is pressed, the power bank is fully dis-charged.
Charging the power bank
Fully charge the power bank before using it for the first time. The power bank
can be charged using the USB-C or MicroUSB connectors. For charging the power
bank, we strongly recom-mend the use of 5 V/2 A or 9 V/2 A power adapters
(power adapter not included). We also recommend that you check the power
bank’s charge status before each use and connection to the mains.
- Plug one end of the charging cable into the MicroUSB port or USB-C port of the power bank, and plug the other end into the USB port of your laptop or the port on your AC adapter.
- To start charging, press the charge check button. Depending on the current state of charge of the power bank, the corresponding number of LED indicators will light up. During charging, the LED indicators will gradually light up. Once all indicators are lit, the device is charged and ready for use.
- Disconnect the charged device from the power supply. The charging time of the power bank may vary depending on the charger used and the USB port selected.
- To maintain the power bank’s optimal performance and durability, we recommend re-charging the device every 3 months when not in normal daily use.
Device charging
You can charge your device using the USB-A output ports or the USB-C port.
- Plug one end of the power cable into the USB power port of your device and connect the other end to the power bank’s output port.
- Press the charge status check button to start charging.
- Depending on the charge status of the power bank, the corresponding number of LED indicators will light up. As the connected device charges, the power bank’s LED indica-tors will gradually turn off. When all LED indicators go out, the power bank is completely discharged.
TROUBLESHOOTING
PROBLEM | PROPOSED SOLUTION |
---|---|
The power bank won’t turn on. | Plug the power bank into the mains and it |
should turn on within 2 to 3 minutes.
The power bank is not charging.| Make sure the power cable is properly
connected to the power bank port and the device being charged.
SAFETY INFORMATION
- Read the safety and operating instructions. Failure to observe the safety and operating instructions can endanger people or damage the device.
- This product is only suitable for household use.
- Use and store the product out of the reach of children. Children must not use this product.
- This product is designed to charge digital device batteries. Use it only in accordance with the instructions in this operating manual. Do not use the product for purposes other than those for which it is intended.
- This product does not contain parts repairable by the user . In the event of a malfunction or defect contact the nearest authorized service center. Check the product or its accessories regularly for damage.
- It is forbidden to use a damaged product or its accessories.
- Always disconnect the interface cable when the product or connected digital device is fully charged. Do not leave the cable plugged in.
- If you will not be using the product for a long time, we still recommend charging it regularly (at least once every six months). This will extend its life.
- Keep this product away from heat sources such as stoves or direct sunlight. No naked flame sources, such as lighted candles, should be placed on the product.
- Do not expose the product to dripping or splashing water or other liquids. Do not place containers filled with water, such as vases, on the product.
- Do not expose the product to extreme temperatures, dust or dirt.
- Do not immerse the product in water or other liquids or throw it into a fire.
- Do not use or store the product near materials/objects that could ignite, flammable or explosive substances, etc.
- Do not leave the product unattended while it is in operation.
- While the product is in operation, ensure that there is sufficient free space around it for proper air circulation. Use the product only on a flat and firm surface. Do not use it on a table with a tablecloth, on a worktop on a dish towel, on a carpet, etc. Never cover the product.
- Do not insert any objects (such as wires or other objects with metal terminals) into the product’s jacks.
- Do not short-circuit, disassemble or otherwise mechanically damage the product.
- While the product is in operation, it may become hot. This is a normal occurrence. Therefore, make sure that there are no heat-sensitive objects/surfaces near the product.
- If you notice an unpleasant odor or smoke while using the product, unplug the product immediately and stop using it. Contact an authorized customer center.
- Avoid overloading the product. Avoid dropping the product.
- Do not place any objects on the product. There is a risk of irreversible damage to the product.
- If you have transported the product when cold, wait until the temperature of the product has equalized before using it.
- Use only a clean, dry cloth to clean the product. Do not immerse the product in water or other liquids to wash it. Do not use any chemical cleaners, abrasives, gasoline, thinners or other similar substances. Before cleaning, make sure that the product is disconnected from the power supply.
- Store the product in a dry and well-ventilated place. Do not place any objects on the product when in storage.
This product meets all of the related basic EU regulation requirements. The EU
declaration of conformity is available on www.
alzashop.com/DoC.
This product sold in the European Union meet the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS).
The use of the WEEE Symbol indicates that this product should not be treated
as household waste. By ensuring this product is disposed of correctly, you
will help protect the environment. For more detailed information about the
recycling of this product, please contact your local authority, your household
waste disposal service provider, or the shop where you purchased the item.
“For indoor use only” symbol indicates that the product is not intended for
outdoor use.
www.alzapower.com
Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic © 2022
Alza.cz a.s. All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>