LEDISONS LDB11-10-30K 10W LED Floodlight Instructions
- June 3, 2024
- LEDISONS
Table of Contents
INSTRUCTIONS
FOR FLOODLIGHT
Instructions
USE AS DIRECTED:
This product serves exclusively lighting purposes and may:
- Not be used indoors.
- Not be exposed to strong mechanical loads or to strong contamination.
- Only be installed and operated after a condition inspection if the product is dirty or has been moistened through storage.
If these points named above are not adhered to, a short circuit or electrical shock may occur!
TECHNICAL DATA:
- Operating voltage: AC100-265V— 50/60Hz
- Safety type: IP65
- Wattage: 10W/20W/30W/50W/100W/150W/200W/300W
ASSEMBLY:
Attention: Use only parts, which belong to he product! Otherwise the product or the installation might not be sufficiently safe. Switch off the power of the mains supply line or respectively of the connection lead before doing any works.
OPERATION:
Information for the user: Operate the product only if it is working correctly. Switch off the product with a malfunction immediately and operate it again only after examination by an electrical specialist.
This is the case, when:
- Visible damages appear.
- The product does not work.
- Smoke, steam or cracking sounds appear.
- An overheating is recognisable. Repairs of the product or work on mains voltage-prominent sections may only be carried out by qualified electricians.
Attention: Here exists mortal danger from an electric shock!
3 WAYS OF INSTALLATION
| (1) Wall Mounting | (2) Pedestal Mounting | (3) Ceiling Mounting |
|---|---|---|
Importer:
LEDISONS
Rendementstraat 5, 8094 RA,
Hattemerbroek, The Netherlands
Made in China