belkin WIB001V2 10W Wireless Charging Stand Instructions
- June 6, 2024
- belkin
Table of Contents
REGULATORY AND SUSTAINABILITY INFORMATION
BOOST↑CHARGE™
WIRELESS CHARGING STAND 10W
SKU/MODEL : WIB001V2
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We, Belkin International, Inc., of 12045 E.
Waterfront Drive, Playa Vista, CA 90094, Tel: +1(310) 751 5100, declare under
our sole responsibility that the product complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End-users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance
with FCC RF exposure compliance requirements, please follow operation
instructions as documented in this manual. This equipment should be installed
and operated with a minimum distance of 20cm between the radiator and your
body.
IMPORTANT NOTE:
Industry Canada Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
Innovation, Science and Economic Development Canada Statement:
This digital apparatus complies with CAN ICES-3(B)/NMB-3 (B).
The marking information is located at the bottom of the apparatus.
Simplified EU Declaration of Conformity
Hereby, Belkin International, Inc., declares that the radio equipment is in
compliance with Directive 2014/53/EU and RoHS Directive 2015/863. The full
text of the EU declaration of conformity is available at the following
Internet address: www.belkin.com/doc. Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement: This equipment complies with radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 cm between the radiator
and your body. Frequency band in which the radio equipment operates: 111kHz to
145kHz Maximum power transmitted: <37.7dBµA/m
Disposal Information for User
Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of
the European Parliament on waste in electrical and electronic equipment
(WEEE). The barred symbol of the rubbish bin shown on the equipment indicates
that, at the end of its useful life, the product must be collected separately
from other waste.
Therefore, any product that has reached the end of its useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country.
The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated, and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the electronic equipment.
Abusive disposal of the product by the user involves the application of
administrative sanctions according to the laws in force.
For information on product disposal, please refer to http://www.belkin.com/uk
/weee-regulations/
Recycling programs for this packaging may not exist in your area.
References
- Belkin Official Support - European Declaration of Conformity (Page 1)
- belkin.com/uk/weee-regulations
- belkin.com/uk/weee-regulations/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>