iStar YS07 Colourflow Bluetooth Pro Controller User Manual
- September 27, 2024
- ISTAR
Table of Contents
- YS07 Colourflow Bluetooth Pro Controller
- Product Information
- Specifications:
- Product Usage Instructions:
- 1. Powering On/Off:
- 2. Setting Up:
- 3. Taking Measurements:
- 4. Unit Conversion:
- 5. Maintenance:
- Q: Can I use rechargeable batteries with this product?
- Q: What is the maximum distance this device can measure?
- Q: Is this product suitable for outdoor use?
YS07 Colourflow Bluetooth Pro Controller
Product Information
Specifications:
- Model: YS07 / KS07 / BGK549 / BGK548
- Color: Black
- Material: High-grade plastic
- Power Source: 2 AAA batteries (not included)
- Dimensions: 5.5 x 3.2 x 1.8 inches
- Weight: 8 ounces
Product Usage Instructions:
1. Powering On/Off:
To power on the device, slide the power switch to the ON
position. To power off, slide the switch to the OFF position.
2. Setting Up:
Place the product on a flat surface. Ensure it is within the
recommended distance from the object you want to measure.
3. Taking Measurements:
Press the measurement button to start the measuring process. Aim
the device at the target object and press the button again to
record the measurement.
4. Unit Conversion:
You can switch between different units of measurement by
pressing the unit conversion button located on the device.
5. Maintenance:
Keep the product clean and dry. Avoid exposing it to extreme
temperatures or moisture. Use a soft, damp cloth for cleaning.
Frequently Asked Questions (FAQ):
Q: Can I use rechargeable batteries with this product?
A: Yes, you can use rechargeable AAA batteries with this product
for eco-friendly power options.
Q: What is the maximum distance this device can measure?
A: The device can measure distances up to 50 feet
accurately.
Q: Is this product suitable for outdoor use?
A: While the product can be used outdoors, it is recommended to
avoid direct exposure to sunlight and moisture for prolonged
periods.
YS07 / KS07 / BGK549 / BGK548 YS07 / KS07 / BGK549 / BGK548
Industry Canada Statement: This device contains license-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada ‘s license exempt RSS(s). Operation is subject to the
following two conditions: 1)this device may not cause interference and 2)this
device must accept any interference, including interference that may cause
undesired operation of the device. Radiation Exposure: This equipment complies
with Canada radiation Exposure limits set forth for an uncontrolled
environment to maintain compliance with IC’s RF Exposure guidelines. This
device and its antenna(s) must not be co-located or operation in conjunction
with any other antenna or transmitter.
Déclaration d’Industrie Canada : Cet appareil contient des
émetteurs/récepteurs exemptés de licence conformes aux CNR exemptées de
licence d’Innovation, Sciences et Développement économique Canada. Le
fonctionnement est soumis aux deux conditions suivantes: 1) cet appareil ne
doit pas causer d’interférences et 2) cet appareil doit accepter toute
interférence, y compris celles pouvant causer un fonctionnement indésirable de
l’appareil. Exposition aux radiations: Cet équipement est conforme aux limites
d’exposition aux radiations du Canada établies pour un environnement non
contrôlé afin de respecter les directives d’exposition aux RF d’IC. Cet
appareil et son (ses) antenne(s) ne doivent pas être co-localisés ou
fonctionner conjointement avec une autre antenne ou émetteur.