LEDISONS LDD25 LED Downlight Provetta Instructions
- June 3, 2024
- LEDISONS
Table of Contents
LDD25 LED Downlight Provetta
Instructions
LED DOWNLIGHT PROVETTA
DIMENSIONS
Cut-out
Downlight diameter
| Tension | Cut-out |
|---|---|
| 3W | 72 mm |
| 6W | 100 mm |
| 9W | 135 mm |
| 12W | 155 mm |
| 18W | 200 mm |
| 24W | 285 mm |
INSTALLATION
- Turn off the power.
- Cut a hole in the ceiling.
- Connect the driver to the mains.
- Complete the installation.
WARNINGS
-
Turn off the power before installing the downlight.
-
Please do not connect the downlight directly to the mains without the driver.
-
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
-
The light source contained in this luminaire shall only be replaced by the manufacturer of his service agent or a similar qualified person.
-
It is preferred that this fixture will be installed by an experienced/trained electrician.
-
This downlight works on a voltage range of 100-265 Volt.
-
Please connect the driver to the mains before turning on the power of the mains.
-
The downlight should not touch the second ceiling, there should be some space around and above the
downlight for heat dissipation and ventilation. -
The guarantee does not apply to any damage caused due to ‘Wrong’ or ‘Bad’ installation or any abnormal conditions that this fixture may have been subjected.
www.ledisons.com
Rendementstraat 5
8094 RA Hattemerbroek
The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>