LEDISONS LDN43-700-D6 Spotlight Set Instruction Manual
- June 3, 2024
- LEDISONS
Table of Contents
LEDISONS LDN43-700-D6 Spotlight Set
COMPONENTS
- Connection to mains,
- Driver,
- Outlet for the spotlights or jumpers,
- Junction box,
- Jumpers
INSTALLATION
- Turn off the electricity.
- The driver comes with a junction box. Each spot comes with 5m wire with connector. These can be connected to the junction box.
- On the junction box, 3-6 spotlights can be connected. Make sure there are at least 3 spotlights connected when the driver is turned on, otherwise the lights may burn.
- If you do not use all the holes of the junction box, fill the empty holes with “jumpers”. The spotlights will only work if all the holes are filled. The jumpers are always included if you do not use 6 spots on a driver.
- Connect the driver to the power (200-240V AC) and try the spotlights.
- If the spotlights work well, put the driver and spotlights on the desired place.
- It is also possible to use a dimmer. For this recessed spot set, you will need a trailing edge LED dimmer.
- Turn on the electricity so all spotlights will turn on.
www.ledisons.com
Rendementstraat 5
8094 RA Hattemerbroek The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>