LEDISONS LED Fluorescent Tube Instruction Manual
- June 3, 2024
- LEDISONS
Table of Contents
TUBUS
LED TUBE BASIC 60 / 120 / 150 CM (LDT51-BXXXXX-BASIC)
Operation instruction
- The LED tube must be installed by qualified electrician.
- Switch off the power before installation.
- Beware of electric shock when replacing the LED tube.
- If any uncertainty about the installation or usage of the tube, please consult the qualified electrician.
- Only to apply in dry indoor usage and dry environments.
- Please replace the defective LED tube in time.
- If failure occurred, please do not attempt to repair the tube by yourself.
- This product is non-dimmable.
- Suitable to be used in combination with magnetic ballast only.
- This lamp is not suitable for emergency operation.
Installationplan
Single ended input
- For new LED luminaire:
- How to replace the traditional fluorescent tube:
- With several 60 cm tubes in 1 fixture or for luminaires with an electric ballast, the wiring must be adjusted. Install all tubes according to figure 1 above. If you have any questions about the installation, please contact the seller.
Installation steps (inductive fixture)
- Shut down the main power.
- Remove the conventional tube.
- Remove the starter.
- Insert LED starter into the starter holder.
- Insert LED tube into the lamp holder and secure the position by turning the lamp.
- Turn on the main power.
LEDISONS
Rendementstraat 5, 8094 RA, Hattemerbroek,
The Netherlands.
www.ledisons.com
References
Read User Manual Online (PDF format)
Loading......