soolutions GF46YGFJ4JDSG Own Mounting Pole Installation Guide
- June 22, 2024
- soolutions
Table of Contents
soolutions GF46YGFJ4JDSG Own Mounting Pole
Product Specifications
- Product Name : Unipole Mounting Set
- Available Variants : Anchor Set, Base Light, Base Heavy
- Includes: Bolts, Washers, Anchor Set, Base Light, Base Heavy
Product Usage Instructions
Mounting with Anchor Set
Mount the Unipole with the supplied washers and bolts.
Mounting on Base Light
- Pull the cable through the hole.
- Place the Base Light in the center of the hole over the cable.
- Ensure the cable is long enough to be connected through the Unipole in the charging station (1.5 m).
- Mount the Unipole with the supplied washers and bolts.
Mounting on Base Heavy
- Determine where the Unipole should be placed and dig a hole of at least 31 x 41 x 29 cm in that spot.
- Ensure the electricity cable is at least 50 cm deep in the middle of the hole where the Base Heavy is placed.
- Pull the cable through the hole.
- Place the Base Light in the center of the hole over the cable.
- Ensure the cable is long enough to be connected through the Unipole in the charging station (1.5 m).
- Fill the remaining space in the hole with sand and finish.
Frequently Asked Questions (FAQ)
-
Q: What should I do if I need more support?
- A: For additional support, please contact customerservice@soolutions.com
-
Q: Is there any email address for customer service in another language?
- A: Yes, for French-speaking customers, you can contact serviceclients@soolutions.com
Montage Unipole
Unipole mounting guide
Mounting Unipole
This instruction manual applies to mounting with the Anchor Set (without
Base), mounting on the Base Light or mounting on the Base Heavy. Bolts plus
washers are included in every situation.
Need more support?
customerservice@soolutions.com
Drill holes in the substrate according to the supplied pattern.
Assembly
Place the anchors in the holes
Pull the cable through the Unipole.
Mount the Unipole with the supplied washers and bolts.
Place the Charger Plate(s) according to the accompanying description and template.
The Unipole is now ready for installation of the charging station.
- Determine where the Unipole should be placed and dig a hole of 45 x 45 x 25 cm in that spot.
- Make sure that the electricity cable is at least 45 cm deep in the middle of the hole.
- Pull the cable through the hole. Place the Base Light in the center of the hole over the cable. Make sure that the cable is long enough to be connected through the Unipole in the charging station (1.5 m).
- Pour 25 kg of (rapid) concrete around the Base Light (see concrete packaging).
- Fill the remaining space in the hole with sand and finish.
- Pull the cable through the Unipole.
- Mount the Unipole with the supplied washers and bolts.
- Place the Charger Plate(s) according to the accompanying description and template.
- The Unipole is now ready for installation of the charging station.
- Determine where the Unipole should be placed and dig a hole of at least 31 x 41 x 29 cm in that spot.
- Make sure that the electricity cable is at least 50 cm deep in the middle of the hole where the Base Heavy is placed.
- Pull the cable through the hole. Place the Base Light in the center of the hole over the cable. Make sure that the cable is long enough to be connected through the Unipole in the charging station (1.5 m).
- Fill the remaining space in the hole with sand and finish.
- Pull the cable through the Unipole.
- Mount the Unipole with the supplied washers and bolts.
- Place the Charger Plate(s) according to the accompanying description and template.
- The Unipole is now ready for installation of the charging station.
Empower. Connect. Energize.
Documents / Resources
|
soolutions GF46YGFJ4JDSG Own Mounting
Pole
[pdf] Installation Guide
GF46YGFJ4JDSG Own Mounting Pole, GF46YGFJ4JDSG, Own Mounting Pole, Mounting
Pole, Pole
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>