MEISTER MH1001 Electric Overblanket User Manual
- June 3, 2024
- meister
Table of Contents
User Manual – Electric Overblanket
Model: MH1001/MH1002
MADE IN CHINA
Please read the manual
> Introduction
Thank you for choosing our Meisterhome® product! Please always follow the instructions for safe usage. If you have any questions about the product or experience any problems, please contact us by email: [email protected]
Keep your bed warm and cozy with the Meisterhome® Overblanket. The comfortable polyester feels soft to the touch. The blanket is equipped with a removable control panel and three heat settings. In addition, the blanket has an overheating protection function and can be hand washed!
Warnings and Safety Instructions
| Do not pierce with needles!| | Do not bleach
---|---|---|---
| Do not use when folded or creased!| | Do not tumble dry
| Not to be used with very young children (0-3 years).| | Do not iron
| Wool program 30°C| | Do not clean chemically
Please ensure that the packaging is kept out of the reach of children! Risk of suffocation!
Make sure to keep this user manual. Read the manual carefully before using your Meisterhome® Electric Overblanket!
General
Be aware of the risks and consequences resulting from misuse of the Electric
Overblanket Misuse can result in personal injury, or destruction of the
blanket.
Use the Electric Overblanket only for purposes described in this user manual.
If the Electric Overblanket malfunctions, or appears to be damaged in any
manner, do NOT use the Electric Overblanket and contact Customer Service.
The Electric Overblanket is designed and intended for private, non-commercial
use only. The blanket is not intended for use in a hospital setting.
When you are not using the blanket, turn the device off and disconnect the
device from the power socket
Only setting 1 can be used for continuous operation. ALWAYS slide the slider
to setting 1 before going to sleep.
Do NOT disconnect the blanket from its power supply by pulling the cable.
Do NOT carry or pull the device by its cable.
Make sure that you do NOT trip over the cable. The cable should not be kinked,
trapped or twisted.
Persons and Use
This device should NOT be used by children under the ape of 3 or persons with
physical, sensory or mental disabilities, or persons with lack of experience
with and knowledge of the device, unless they are supervised or have been
given instruction concerning the use by a person responsible for their safety.
Children from the apes 3 to 8 should only use the blanket when they are
supervised by a person responsible for operating the control panel and who is
responsible for their safety.
Keep the Electric Overblanket away from children under the ape of 3 when using
and storing. Make sure children do not play with the blanket.
This electric underblanket must not be used by people who are not sensitive to
heat or by people who may not be able to react to overheating (diabetics,
people with skin conditions or scars, after drinking alcohol, usinp drugs or
intoxatives, or taking medicine).
Do NOT place the blanket near our eyes or other sensitive areas.
Never place the blanket on or over your head.
Prolonged use of the blanket at a high setting could lead to skin burns.
Medical remarks
This device is NOT a substitute for treatments administered by doctors or
physiotherapists.
Do NOT use the Electric Overblanket/consult your physician if you:
Are pregnant;
Are fitted with a pacemaker or other medical devices.
Have circulation disorders, varicose veins, open wounds, bruises, broken skin,
inflammation of the veins, or other skin conditions;
If you are sensitive to heat.
Before using the Electric underblanket, consult your doctor regarding any
unexplained pain, if you are undergoing medical treatment or using medical
equipment.
Electronics
Do NOT reconstruct, repair or disassemble the Electric Overblanket. This can
damage the device. For safety reasons, these parts may only be replaced by
authorized service personnel. In order to prevent hazards, always send the
blanket to the service centre for repairs.
Make sure your outlet supplies the correct power voltage to avoid damage to
the Electric Overblanket. Always check the power cord and plug before using
the Electric Overblanket. Do NOT operate the blanket if the cord or plug are
damaged. A damaged cord or plug must be replaced by a qualified person in
order to avoid damages and personal injuries.
Do NOT use the Electric Blanket in or near a bath, shower, swimming pool, or
over a basin filled with water when it is turned on. Do NOT operate the device
with damp or wet hands and do NOT touch the power cord with damp or wet hands.
Make sure to prevent any contact with water. Do NOT submerge the Electric
Blanket in water. Make sure the control panel does not come into contact with
water. If water does get inside the casing, turn the device off immediately
and contact our customer service.
If the power fails during usage, turn off the blanket immediately and pull the
plug from the socket.
The Electric Blanket heats up during use. Do NOT use the device if you are
sensitive to heat.
Keep the Electric Blanket away from moisture, heat and in or close to areas
where the surrounding temperature is relatively hot (e.g. stoves or other
sources of heat).
Do NOT cover the control panel when it is switched on. Never put blankets or
cushions on top of or against the control panel. This poses a risk of fire,
electric shock or injury.
Other
Do NOT place objects or heat sources (such as hot water bottles) on the
electric blanket when it is turned on or stored away.
The Electric Overblanket can only be operated using the control panel.
Do NOT use the blanket when it is folded, creased, wrapped in a cover or
placed around the mattress.
Four fastening straps are located on the corner of the blanket. Use these
straps to attach the blanket to the mattress using a suitable band or cord.
Make sure that the blanket is firmly strapped to the mattress in both
directions and that it will not crease while it is being used. Check if it is
in the correct position before lying on it.
Before using the blanket on an adjustable bed, make sure that the power cable
and the blanket do not get caught in the hinges or get crumpled when making
adjustments.
Neither pierce the blanket with, nor attach safety pins or other spiky or
sharp objects to the pad.
Let the blanket cool down completely before folding and storing it. Do not
fold it too tight.
Store the blanket in its original packaging and keep it in a clean, dry place.
The blanket can be washed by hand. Make sure to ALWAYS disconnect the control
panel before washing the blanket.
Receiving Your Shipment
– When receiving your shipment, make sure that the contents are consistent with the packing list. Notify your distributor of any missing items. If the equipment appears to be damaged, file a claim immediately with the carrier and notify your distributor at once, giving a detailed description of any damage. Save the damaged packing container to substantiate your claim.
Contents of Package
– Meisterhome® Electric Overblanket – Grey – Model MH1001 – EAN 5060619672048
OR
– Meisterhome® Electric Overblanket – Grey – Model MH1002 – EAN 5060619672031
Included Accessories
1x User Manual
1x Control Panel
Product Features
Technical Data
Size
| 180 x 130 cm
160 x 120 cm
---|---
Weight|
1,6 kg
Colour
| Grey
Material|
Fleece
Cable Length
| 240 cm
Input|
220V – 240V
Power
| 120 W
3 heat modes|
Low: 30±5°C
Medium: 40±5°C
High: 45±5°C
Other Features
Automatic shut-off after 180 minutes of continuous use;
Overheating protection;
Hand washable;
– Illuminated and removable control panel.
Operating Instructions
Never place the blanket on or over your head.
Prolonged use of the blanket at a high setting could lead to skin burns.
Only setting 1 can be used for continuous operation. ALWAYS slide the slider
to setting 1 before going to sleep.
How to Use
- Connect the plug to a power outlet, make sure that the cable is not twisted.
- To preheat the blanket, select the third setting and wait 15 minutes. The temperature will gradually rise.
- After preheating, slide the control button to your preferred setting.
- Slide the control button to the “OFF” position to turn the device off.
Note: The heated blanket is equipped with a safety protection against overheating. After 180 minutes of use, the blanket will turn off automatically. If you want to use the blanket after it has turned off, let it cool down for 5 minutes and turn it on again.
> Maintenance and Cleaning
Remove the plug from its socket and let the blanket cool down completely. Disconnect the plug from the control panel and the blanket. Hand wash the blanket. Use lukewarm water and a mild detergent and carefully squeeze the water out. Rinse the blanket several times to remove all the detergent. Do not tumble dry, or use a (hair) dryer or iron to dry this product. Stretch the blanket out on a flat surface and dry it naturally. Only use the blanket once it is completely dry. You may also wash the blanket in a washing machine at a maximum temperature of 30°C with low mechanical action and spin.
> Storage
Let the blanket cool down completely before folding and storing it. Store the Electric Blanket in its original packaging in a clean and dry place. Make sure that you do not damage the power cord. Do not place anything on top of the blanket. Do not store the device in extreme high or extreme low temperatures.
> Disposal Recycle
Contribute to a cleaner living environment! Do not dispose of the Electric Blanket with the household waste. For proper recycling, please contact your local authority or your household waste disposal service for further details on your nearest designated collection point.
> Service and Warranty
If you need service or information regarding your product, please contact the Meisterhome® Customer Support at [email protected]
Meisterhome® provides a 2 year warranty on its products. To obtain service during the warranty period, the product needs to be returned with a proof of purchase. Product defects have to be reported within 2 years from the date of purchase. This warranty does not cover: damages caused by misuse or incorrect repair;parts subject to wear; defects that the customer was aware of at the time of purchase; damages or defects caused by customer neglect; damages or defects caused by third parties.
Disclaimer
Changes reserved; specifications are subject to change without stating grounds for doing so.
© MeisterClass BV
Tackenweide 27
46446 Emmerich
[email protected]