M-ELEC NOX 700-100 LED Floodlight Instructions
- June 10, 2024
- M-ELEC
Table of Contents
M-ELEC NOX 700-100 LED Floodlight
Product Name:
NOX 700-1000W LED Floodlight
The NOX 700-1000W floodlight is our latest development of this iconic LED
floodlight range. Featuring an unique offset bracket that makes for ease of
installation, super slim body. NOX V4 is the brightest choice by far.
Supported by a generous 7 Year Warranty with an
M-World 3 Year OSW.
APPLICATIONS
- Commercial applications:
- General area lighting (up to 37m @ 31m installation height)
- Sportsfield lighting
Features
- Supported by a 7-year warranty with an M-World 3-year OSW
- Unique offset bracket for ease of installation
- Super slim body
- IP65 and IK10 compliance
- Dimmable beam
- Power selectable (700W/800W/900W/1000W)
- Average life of 50,000 hours
- Constructed with ADC12 Aluminum heat sink with Akzonobel power coating & PC lens
Technical Information
| Total Power: | MAX 1000W (POWER SELECTABLE 700W/800W/900W/1000W) * |
|---|---|
| Lumen Output: | ML-NOX70-1000-V4-WW |
| 143466 lm | ML-NOX70-1000-V4-W |
146172 lm
Colour Temp:| 3000K| 5700K
IP Rating:| IP65
Efficacy:| 149 lm/W| 151 lm/W
CRI:| >70
Frequency| 50/60Hz
Beam Angle:| 60°
Temp Range:| -20° to +40°
Dimmable:| Yes 1-10V
Power Supply:| 120-277V AC Towin dimmable driver
Average Life:| 50,000 hrs
Inrush Current:| 85A
Current Draw:| 700W= 2.9A/ 800W= 3.35A/ 900W= 3.75A/ 1000W=4.15A
Power Factor:| >0.9
IK Rating| IK10
LM Rating| L70-LM80
Dimensions:| 645x166x800mm
Weight:| 30.7kg
Warranty:| 7 Years
Construction:**| ADC12 Aluminium heat sink with Akzonobel power coating &
PC lens
Total power consumed including driver
Average life is calculated on expected average lifespan
Product Usage Instructions
- Switch mains power off to the fitting.
- Remove the bracket from the fitting ensuring to retain all screws.
- Install the bracket using the correct equipment and components (e.g. expansion bolts for masonry).
- Install the fitting back onto the bracket with the original screws and components.
- Connect wires accordingly and ensure that the connections are contained in a suitable enclosure.
- Provide power to the fitting and test accordingly.
Note: Always ensure that both DIP switches are set to the same required wattage for accurate power output and lux levels.
PRODUCT FEATURES
- Aluminum die-cast AkzoNobel performance coated body
- 180° adjustable bracket
- Fully gasketed lens and driver plate cover to protect against the elements
- Power consumption: 700/800/900/1000W
- White and warm white options available
- 1-10V dimming capability
- IP65 and IK10 rated
- 165° adjustable spigot bracket accessory available
COMPLIANCE
SAA, IP65, IK10, C-TICK
CANDELA DIAGRAM & ISOLUX PLOT
PRODUCT DIMENSIONS
INSTALLATION GUIDE
- Switch mains power off to the fitting.
- Remove the bracket from the fitting ensuring to retain all screws.
- install accordingly using correct equipment and components (e.g.. Expansion bolts for masonry)
- Install the fitting back onto the bracket with the original screws and components
- Connect wires accordingly and ensure that the connections are contained in a suitable enclosure.
- Provide power to the fitting and test accordingly.
WIRING DIAGRAM
ACCESSORY INSTALLATION
Compatible with: NOX70-100
FLAT SURFACE BRACKET INSTALLATION – ML-NOXV4BKT
POWER SELECTION
To select the power wattage ensure power is off prior to adjusting.
- Unscrew the power selector cap before using the selectable power function.
- Select the wattage by toggling the DIP switch 1, 2, 3 to select the corresponding power.
- Screw the cap on after selection.
- Repeat steps 1 – 3 for the second DIP switch.
NOTE : ENSURE THAT BOTH DIP SWITCHES ARE SET TO THE SAME REQUIRED WATTAGE FOR ACCURATE POWER OUTPUT AND LUX LEVELS.
PLEASE NOTE
- Read instructions carefully before attempting to install the fitting. Retain this guide for future reference
- Disconnect power before installing or servicing
- This fitting is for outdoor use and should not be used in areas with limited ventilation or high ambient temperatures
- Do not extend low voltage cables from the output of power supply
- All components must not be mechanically stressed
- Be careful not to damage or destroy conductive paths on the circuit board
- Follow all relevant electrical and safety standards (including AS3000)
- Correct electrical polarity must be observed as the wrong polarity may destroy the product and is not covered under warranty
- Damage by corrosion will not be honoured as a material defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture, condensation and other harmful elements
- If the external flexible cable or cord of this luminaire is damaged, it shall be exculsively replaced by the manufacturer or their service agent or a similar qualified person to avoid a hazard.
- The light source contained in this luminaire shall only be replaced by the manufacturer or their service agent or a similar qualified person.
T. 1300 222 445 | www.melec.com.au Data subject to change at any time
For further information about our Warranties please go to: melec.com.au/legal/warranties
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>