meister 2,5 x 100 mm Cable Ties Instructions
- May 15, 2024
- meister
Table of Contents
meister 2,5 x 100 mm Cable Ties
Product Specifications
- Compliance: EN62275:2015, 2014/35/EU, UL94V-2
- Recommended Installation Method: Tighten the cable ties by hand
- Storage Recommendation: Store at room temperature and protect from direct sunlight
Product Usage Instructions
Dimensions:
- 2.5 x 100 mm
- 4.6 x 200 mm
- 7.5 x 200 mm
- 4.6 x 300 mm
- 7.5 x 300 mm
(Loop Tensile Strength):
- 2.5 x 100 mm – 80N, 3.0 mm / 20.5 mm
- 4.6 x 200 mm – 230N, 3.5 mm / 49.5 mm
- 7.5 x 200 mm – 540N, 8.5 mm / 50.9 mm
- 4.6 x 300 mm – 230N, 3.5 mm / 81.0 mm
- 7.5 x 300 mm – 540N, 8.5 mm / 82.8 mm
Frequently Asked Questions (FAQ)
-
Q: What is the recommended method of installation?
A: The intended use is to tighten the cable ties by hand. -
Q: How should the cable ties be stored?
A: The cable ties must be stored at room temperature and protected from direct sunlight.
Information sheet cable ties
- Item: Nr. WU1746650
- Material: Polyamide 66 (PA66)
- Use temperature: -20°C to 85°C
- Storage advice : -15°C to 60°C
- Flame exposure time: Less than 5 seconds
- Not UV resistant
- Guideline conformity marking : EN62275:2015, 2014/35/EU, UL94V-2
Recommended installation method
The intended use is to tighten the cable ties by hand.
Recommendation for transport/storage
The cable ties must be stored at room temperature and protected from direct
sunlight.
Specifications
Sizes| 2.5 x 100 mm| 4.6 x 200 mm|
7.5 x 200 mm| 4.6 x 300 mm| 7.5 x
300 mm
---|---|---|---|---|---
Loop Tensile Strength| 80N| 230N| 540N| 230N| 540N
Smallest/largest bundle diameter| 3.0 mm / 20.5 mm| 3.5 mm / 49.5 mm|
8.5 mm / 50.9 mm| 3.5 mm / 81.0 mm| 8.5 mm / 82.8 mm
Conmetall Meister GmbH
Hafenstraße 26 · 29223 Celle
GERMANY
www.conmetallmeister.de