NEXIGO S32 Head Strap with Battery User Manual
- June 13, 2024
- NEXIGO
Table of Contents
For Quest 2
S32
User Manual
Scan the QR code or visit our link to download the latest manual or watch the installation video.
WELCOME TO THE NEXIGO FAMILY!
Thank you for choosing the NexiGo S32 Head Strap with Battery!
You are now part of an exclusive club: the NexiGo family! It’s our job to make
sure you enjoy your membership. If you have any problems, please contact us
any time at cs@nexigo.com for further assistance.
This product is automatically covered by our industry-leading one-year
manufacturer’s warranty. Make sure to register your purchase at
nexigo.com/warranty within 14 days of the delivery date, and we will extend
your warranty coverage another year, for a total of two years!
From all of us here at NexiGo, we want to thank you for your trust in us. We
look forward to serving you again soon.
Sincerely,
The NexiGo Team
CONTACT INFORMATION
Website: www.nexigo.com
Manufacturer: Nexight INC
E-mail: cs@nexigo.com
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR, 97005, US
PRODUCT INTRODUCTION
The NexiGo S32 Head Strap with Battery is specially designed to extend the
battery life of the Oculus Quest 2 headset, allowing you to play for much
longer than before. Plus, it reduces pressure on your head for a more
comfortable and immersive VR experience.
The S32 holds the Oculus headset more stably, and the weightbalancing design
helps reduce facial pressure, The built-in battery pack has multiple charging
protection features to make it safer and more reliable. It’s also equipped
with our battery level indicators to easily see how much power your head
strap has.
The NexiGo S32 is a must-have for the Oculus Quest 2 gamers.
WHAT’S IN THE BOX？
1 x S32 Head Strap with Battery
1 x User Manual
SPECIFICATIONS
| Battery Capacity | 5300mAh |
|---|---|
| Rated Input | 5V 2A |
| Rated Output | 5V 2A |
| Operating Temperature | 23°F – 113°F (-5°C – 45°C) |
| Storage Temperature | 14°F – 140°F (-10°C – 60°C) |
PRODUCT OVERVIEW
| 1. Type-C Charging Connector | 6. Head Strap Soft Contact |
|---|---|
| 2. Headset Holder Strap | 7. Headrest Knob |
| 3. Adjusting Node | 8. Type-C Charging Port |
| 4. Auxiliary Force Soft Contact | 9. Battery Indicators |
| 5. Folding Node |
NOTES
Please ensure that the battery pack is fully charged before using it for the
first time.
When charging, please use a charger that has safety certifications and supports
DC 5V 2A. Otherwise, the battery may not charge correctly.
If you don’t plan to use the head strap for a long period, please charge the
battery to 50% (indicator level 2), store it in a dry environment at room
temperature, and recharge the battery to 50% every three to six months to
prevent it from degrading.
Ensure that the battery pack is not stored or used in overly hot or cold
temperatures. This may adversely affect battery performance and longevity.
Avoid exposing the unit to water.
Avoid dropping, throwing, or allowing severe vibrations to the product, as
this may cause damage to its internal components.
Keep out of reach of young children.
The battery pack may be slightly warm after charging. This is normal.
Do not attempt to disassemble, repair, or modify the battery pack under any
circumstances. If the unit requires repairs, contact customer service to
exercise your warranty.
If you find leakage, odors, or smoke coming from the device, please stop using
the product immediately and contact NexiGo customer service to exercise your
warranty.
INSTALLATION GUIDE
Step 1
Remove the original Quest 2 straps and take the S32 out of the package.
Step 2
Align and connect the left and right headset holder straps on the S32 with the Quest 2.
Step 3
Ensure that you have pushed the headset holder straps firmly into place.
Step 4
Remove the face shield from the Quest 2 and pass the head strap through the slot at the front of the headset.
Step 5
Reattach the face shield to the headset.
Step 6
Plug in the USB-C connector from the battery pack to the Quest 2 headset. The battery pack will start to charge the headset automatically.
Step 7
Rotate the headrest knob to fit your head. And adjust each joint on the S32 until it feels comfortable.
Step 8
After you’ve adjusted everything, it’s time to jump into VR!
HOW TO USE THE BUILT-IN BATTERY PACK
POWER ON/OFF
The battery pack will automatically power on when it is plugged into the
headset, and will automatically power off when unplugged.
LOW BATTERY ALERT
The battery indicator LED #1 will flash white when the battery is below 3%.
Please charge the battery pack by connecting it to a power source (laptop,
computer, wall outlet, etc.) that provides an output current at DC 5V 2A using
a USB-C charging cable (sold separately).
CHARGING THE BATTERY PACK
Charge the battery pack by connecting it to a power source (laptop, computer,
wall outlet, etc.) that provides an output current at DC 5V 2A using a USB-C
charging cable (sold separately). The LED indicators will begin breathing to
indicate the charging status.
When all four LED indicators are lit, the battery pack has been fully
charged.
CHARGING THE QUEST HEADSET WITH THE BUILT-IN BATTERY PACK
Plug the USB-C connector from the battery pack into the Quest 2 headset. The
battery pack will automatically power on when it is plugged into the headset.
The battery indicators will light up while the headset is being charged.
FCC REQUIREMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Get in touch with FREE online services.
Register to get EXTRA ONE YEAR warranty. Only valid in registering within 14 days of product delivery.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>