TRIDONIC sceneCOM S CWM 30 BT DA2 Installation Guide
- June 3, 2024
- TRIDONIC
Table of Contents
TRIDONIC sceneCOM S CWM 30 BT DA2
Wiring diagram
Line length at inputs T1–T4 and COM
Dimensional drawing
SCS commissioning App
Multi Master Application Controller with 4 independent inputs for floating contacts.
Technical Data
- Supply via DALI
- Supply voltage1 9.5 – 22.5 V
- Current consumption max. 30 mA
- Bluetooth® version 4.1
- Bluetooth® signal up to 20 m
- Input 4 momentary-action switches or relais
- Output DALI
- Ambient temperature ta 0 … +60 °C
- tc 65 °C
- Storage temperature -25 … +60 °C
- Turn on time 6 s
- Humidity 20 … 90 % (non-condensing)
- Type of protection IP20
- Mounting Mounting box 60 x 61 mm (ø x D)
- Casing material Lexan 923
- Casing colour Light grey, similar to RAL 7035
- Dimensions L x W x H 47.7 x 28.2 x 14.6 mm
Uin acc. IEC 62386-101.
Installation
- Device can be inserted into the mounting box for the momentary switch.
- Device must not be connected to the mains. It is supplied directly via the DALI signal line.
- The momentary switches are connected directly to the device (potential free contacts) and must not be connected to the mains.
- DALI signals are not SELV. Therefore the same procedures should be applied as working with mains voltage.
- Only one momentary switch for each device output.
- Only one application controller in the same DALI network allowed.
- Maximum range of the signal is up to 20 m. Avoid mount the device behind glass or concrete surfaces and in metal enclosures. If mounted behind such materials the signal range will be reduced.
Safety instructions
- Installation of this device may only be carried out by specialist staff who have provided proof of their skills.
- The power supply must be switched off before handling the device.
- The relevant safety and accident prevention regulations must be observed.
Areas of application
The device may only
- be used for the applications specified.
- be used for safe installation in dry, clean environment.
- be installed in such a way that access is only possible using a tool.
Compatible devices
- App „sCS commissioning“ compatible with Android 6.0 / iOS 10 or later.
- Recommend devices, minimum screen size 20 cm diagonal, minimum resolution 1,024 x 768 pixels.
- The device must support Bluetooth Low Energy version 4.1 or higher.
- Hereby, Tridonic declares that the radio equipment type sceneCOM S CWM 30 BT DA2 is in compliance with Directive 2014/53/EU.
- Hereby, Tridonic declares that the radio equipment type sceneCOM S CWM 30 BT DA2 is in compliance with Directive UK SI 2017 No. 1206.
- The full texts are available at the following internet address: https://trid.help/en28002205cer
09/22-15013376-6 We reserve the right to make technical changes without prior
notice.
Tridonic GmbH & Co KG, www.tridonic.com,
info@tridonic.com, Tel. +43 5572 395-0
References
Read User Manual Online (PDF format)
Loading......