MokerLink Fiber Media Converter User Manual

MokerLink Fiber Media Converter

Overview

The non-managed fiber media converter is designed with a switch controller and buffer memory that connects two types segments operation smoothly. The converter can be used as standalone type or as card type to the 2U 19” converter rack-mount chassis for centralized power management.

• Data Rate : 10/100Mbps, 10/100/1000Mbps.
• Fiber Type : 550M/2KM for Multimode; 20/40/60/80/120KM for Single mode.
• Optic Connector: SC(optional)/ST/FC/LC

Features

• Built-in efficient exchange kernel, Broadcasting filtration function, flow control, CRC error check.
• Supports SPANNING TREE to conduct fault-tolerant network.
• Supports 10/100Mbps or 10/100/1000Mbps full/half duplex self-adaptive transmission and auto-negotiations,easy upgrades.
• Max. transmission distance can be 120km.
• External power or Built-in power.
• Standalone type can be installed into 14slot 2U Rack; Card type into 16slot Rack.
• Hot-swap, High reliability.
• Cache capacity: 1M Bits.
• Built-in MAC address buffer space: 1K.

Standards Protocol

• IEEE802.3 Ethernet standard
• IEEE802.3u fast Ethernet standard
• IEEE802.3d Spanning Tree standard

Panel Structure Chart

10/100Mbps Media Converter

10/100/1000Mbps Media Converter

Front Panel of SFPMedia Converter

LED Status Instruction

Link/

Act

| Fiber/

Ethernet

| ON| Connected
FLASH| Data flow
OFF| Not link
100M| Ethernet| ON| 100Mbps signal
1000M| Ethernet| ON| 1000Mbps

signal

Installation and Connection

• When connecting with PC, twisted-pair are parallel lines.
• When connecting switch concentrator, twisted-pair are cross-wire

Connecting with IP Network

Connecting with IP camera

Caution

• The connection of optical interface must match single mode/multimode for Tx and Rx.
• Dual fiber, Tx and Rx must be same wavelength; Single fiber, Tx and Rx as corresponding crossed wavelength.

Applicable optical cable

• Multimode optical cable :  50/125um,62.5/125um,100/140um.
• Single optical cable : 8.3/125um,8.7/125um,9/125um,10/125um.
• UTP Cable: Cat5/5e,Cat6
• Confirm the input voltage of equipment: 110V/220V or 12V/24V/48V,then connect with corresponding power adapter, PWR indicator will be on when suitable power supply.

Technical Parameter

Items| 10/100M Media

Converter

| 10/100/1000M

Media Converter

---|---|---
Transmission

Type

| Fast Ethernet| Gigabit Ethernet
Transmission

Mode

| 10/100M Full/half

duplex

| 10/100/1000M

Full/half duplex

MTBF| >3 years| > 3 years
BER| <1E-8| <1E-8
Data Buffer| 1MBits| 1MBits
Power Stability

Factor

| 0.2mw/℃| 0.2mw/℃
Input Power

Range(dBm)

| 0~-30| 0~-40
Operation

Temperature

| 0℃~70℃| 0℃~70℃
Storage

Temperature

| -45℃~80℃| -45℃~80℃
Maximum

Current

| 800mA| 800mA
Power| 2.5w| 2.5w
EMC| Accord with FCC

Part15

| Accord with FCC

Part15

Volume| External: L×W×H 95×70×26mm
Internal: L×W×H 140×110×30mm

Optional LFP Function

• 10/100Mbps
• No fiber signal when Network disconnected, vise verse.
• 10/100/1000Mbps
• No Network signal when fiber disconnected.

Packing List

Please check the following items from package before Installing the converter

• 1 Fiber Media Converter
• 1 Power Adapter
• 1 User Manual

Wuhan MokerLink Technology Co.,Ltd
Rm10,13/F,Main Building 7,Changhang Lanjing International, No.116 Gaoxin Ave.,Hongshan Dist.,Wuhan,China
http://www.mokerlink.com
support@mokerlink.com
For technical support and other information, please visit
http://www.mokerlink.com/support

References

• MokerLink Store
• Contact Us

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>