MAXIM LIGHTING 30096 Catalina 2 Light XL Outdoor Wall Sconce Instruction Manual
- June 12, 2024
- MAXIM LIGHTING
Table of Contents
Item / Model Number: 30096
Catalina 2-Light XL Outdoor Up-Light Wall Sconce 
Lamping I Ampoule: 2 X E26 Medium Base 60W (Not Included)
Made in China
OUTDOOR INSTRUCTIONS
Before Getting Started
Read the instructions carefully prior to assembling the product. When you open
the package with a sharp tool like a box knife, be careful not to damage the
components inside. Carefully remove all packaging materials and retain for
future use.
Keep all hardware parts and packaging out of reach or small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
- Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock!
Disconnect from power source before assembling or cleaning. Switch off, unplug
and allow bulb to cool before replacing bulb or cleaning. Only use the
recommended bulb type and do not exceed the maximum wattage as it could cause
fire.
Check the product cord to be sure is free torn or frayed.
WET LOCATION: For outdoor use, caulk around fixture with silicone sealant
to prevent water intrusion. Leave a gap at the bottom to allow moisture to
escape.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges. For respective shade surfaces, use the
appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh
cleaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
PARTS
Before gettlng, started, ensure the package contains the followlng
components:
For outdoor
use, caulk around fixture with silicone sealant to prevent water intrusion.
Leave a gap at the bottom to allow moisture to escape.