LASER CDP-WM03-388 Personal CD or MP3 Player User Manual
- June 12, 2024
- Laser
Table of Contents
User Manual
Personal CD/MP3 Player
CDP-WM03-388
WHAT’S IN THE BOX
- CD/MP3 player (2 AA battery not included)
- Headphone
- User Manual
SPECIFICATIONS
Compatible Disc | CDs, CD-R/RW, MP3-CDs |
---|---|
Power source | 2 AA batteries or DC 5V |
Playback time | Up to 7 hours play time |
POWERING THE PERSONAL CD/MP3 PLAYER
BATTERY INSTALLATION
- Open the battery cover
- Place two AA batteries into the empty battery slots
- Place the battery cover back down
Note: The display will show battery capacity
OPTIONAL AC ADAPTER (NOT INCLUDED)
- Remove batteries from the unit
- Insert the AC adapters small DC power jack into the port located on the rear of the unit
CONTROLS
1. Disc Tray | 9. Previous Track Button |
---|---|
2. Battery compartment | 10. Next Track Button |
3. Tray open Button | 11. Hold Button |
4. LCD Display | 12. Volume Dial |
5. Play/Pause/Power on | 13. DC power jack |
6 Stop/Power Off | 14. Headphone Jack |
7. Program button | 15. Bass Boost Switch on/off |
8. Mode Button |
CD PLAYBACK
POWER ON/OFF
- Open the Tray door by pushing the Tray door button
- Place disc onto the spindle until it snaps in place
- Close the tray
- Press the Play/Pause button
BASIC OPERATION
- Press the Play/Pause button to start playing the disc
- Press the Play/Pause button while playing and the disc will pause, press the Play/Pause button again and it will continue playing
- Press the Stop Button while playing, the device will stop playing the disc and power off after 30 seconds
- Press the Stop button twice and the unit will power off.
PLAYBACK MODES
- Press the mode button until the LCD displays “1” This will play a single track on repeat. If your disc has stopped, press play to resume.
- Press the mode button until the LCD displays “All”. This will play the entire CD on repeat.
- Press the mode button until “1” or “All” appear, this will cancel the repeat function.
- Press the mode button until “RND” appears on the LCD display, this will play the entire CD at random. To cancel this function, press the mode button until “RND” is displayed again.
PLAYBACK MODES
- Press the mode button until the LCD displays “1” This will play a single track on repeat. If your disc has stopped, press play to resume.
- Press the mode button until the LCD displays “All”. This will play the entire CD on repeat.
- Press the mode button until “1” or “All” appear, this will cancel the repeat function.
- Press the mode button until “RND” appears on the LCD display, this will play the entire CD at random. To cancel this function, press the mode button until “RND” is displayed again.
- Press the mode button until INTRO is displayed, this will play the first 10s of a track.
PROGRAMMED PLAY
Select the tracks from the CD disc to play and you choose 20 track max.
-
Press the stop button during playback. Press the program button
-
Pressing the previous or next button and the desired track number will flash on the display
-
Once you have selected your desired track, press the program button again to program the track.
-
If you want all tracks to be programmed, repeat step
-
To begin the programmed playback, press the play button.
(NOTE: When playback stops, the programmed playback will be erased.) Notice: To cancel programmed playback, press the play button.
ESP
This player has ESP function. Anti-shock system to prevent interruption of CD playback in case of vibration When playing, the screen will display ESP. With up to 40 seconds anti-skip protection for CDs and 120 seconds anti-skip protection for CD-R, portable cd player will read cd smoothly when you walk or drive.
TROUBLESHOOTING
DEVICE IS NOT TURNING ON
- Make sure the 2 AA batteries are seated properly.
- Make sure the DC Jack is inserted fully.
CANNOT READ DISCS
- Ensure that the disc has been inserted correctly.
- Check that the disc is using a compatible format
- Make sure the disc is clean and not scratched
THE PLAYER IS LOUD AND MAKES AND SCREAMING NOISE
- Make sure the disc is not damaged or dirty.
Thank you
for your purchase!
Laser Corporation is 100% Australian owned & operated. To get the most out of
your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs,
Warranty claims, and more, please scan the following QR code:
Visit our website
Check us out at
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>