MokerLink POE-F162G 16 Port PoE Switch with 2 Gigabit Uplink Ethernet Port Installation Guide
- June 12, 2024
- MokerLink
Table of Contents
MokerLink POE-F162G 16 Port PoE Switch with 2 Gigabit Uplink Ethernet
Port
Product Information:
The POE-F162G is an 18-port unmanaged PoE+ switch that supports IEEE 802.3af/at standard. It has 16 10/100Mbps PoE ports and 2 10/100/1000Mbps RJ45 ports. The switch has port-based VLAN, lighting protection, and rack mount support. The switch is suitable for data network operators, broadband private networks, and multimedia transmission.
Key Features:
- IEEE 802.3af/at Support
- 250m PoE Extend
- Port-based VLAN
- Lighting Protection
- Rack Mount Support
Specification:
- Power Input: AC 100-240V, 50/60Hz
- Switching Capacity: 12Gbps
- Throughput: 6.844Mpps
- PoE Protocol: IEEE802.3af (15.4W) IEEE802.3at (30W)
- Power Pin: 1/2+3/6End-span
- LED Indicators: PWR(power supply), K1,K2,K3(Extend Enable), 1-16 Green(Link&Data)
Product Usage Instructions:
The POE-F162G switch is easy to use and requires no configuration. Simply connect the power cord to the power input and connect your devices to the switch using Ethernet cables. The switch will automatically detect and power the powered devices that comply with the IEEE802.3af or IEEE802.3at standards. The non-PoE device will only transmit data.
The switch has port-based VLAN, which allows you to separate and secure your network traffic. To use this feature, you need to configure the DIP switch. By default, all ports communicate freely. If you want to enable the port-based VLAN, set the DIP switch to “Extend”. The switch will isolate the ports with each other, but they can communicate with the uplink port 17-18. The switch supports 250 meters transmission on 10Mbps/s.
The switch also has lighting protection to prevent damage from lightning strikes. The switch is suitable for use in various environments such as data network operators, broadband private networks, and multimedia transmission. The switch is compatible with different network media such as Cat3, 4, 5 or above UTP for 10Base-T, Cat5 or above UTP for 100Base-TX, and Cat5 or above UTP for 1000Base-TX.
Introduction
18 Ports 10/100Mbps Power over Ethernet Switch (PoE Switch), using high-
quality high-speed
network IC and the most stable PoE chip, PoE Port support IEEE802.3af and
IEEE802.3at
standard both, The network provides a seamless connection, and the PoE power
port can
automatically detect and power the powered devices that comply with the
IEEE802.3af or
IEEE802.3at standards. The non-PoE device intelligently detects no power and
only transmits data.
Key Features
• 1610/100Mbps POE ports + 2 10/100/1000Mbps Ethernet Uplink ports
• Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3ab ,IEEE802.3z IEEE802.3x
standards
• Ethernet port supports 10/100M adaptive
• Flow control mode: full-duplex adopts IEEE 802.3x standard, half-duplex
adopts Back pressure
standard
• Support port auto flip (Auto MDI/MDIX)
• Automatically supplied to adaptive devices
• Indicator monitoring status and help failure analysis
• Support for Extend mode – port isolation and 250m distance extend
• Compatible with 1U rack installation
Application Environment
Metro Optical Broadband Network: Data network operators such as
telecommunications, cable TV,
and network system integration,etc.
Broadband private network: Suitable for financial, government, oil, railway,
electric power, public
security, transportation, education and other industries
Multimedia transmission: Integrated transmission of images, voice and data,
suitable for remote
teaching, conference TV, videophone and other applications
Specifications
Product Picture
WuHan MokerLink Technology Co., Ltd
http://www.mokerlink.com
support@mokerlink.com
Product Picture
Model: POE-F162G
18-Port 10/100Mbps Unmanaged PoE+ Switch