Mokerlink 5-Port 2.5G Ethernet Switch User Manual
- June 3, 2024
- MokerLink
Table of Contents
Mokerlink 5-Port 2.5G Ethernet Switch
Product introduction
- 5‑port / 7‑port/ 8‑port 2.5Gbps switch, with line speed forwarding capability per port. With 5‑port / 8‑port 10M/100M/1G/2.5G
- RJ45 / PoE port, this series of switches has good network adaptability for applications such as security monitoring,
- diskless startup and wireless networking.
Product characteristics
- Each port supports MDI / mdix auto flip and duplex / rate self negotiation.
- Support IEEE 802.3x full duplex flow control and backpressure half duplex flow control.
- The equipment meets the national CCC standard, fully meets the requirements of safety regulations, and is safe and reliable.
- Plug and play, no management required.
- Dynamic LED indicator provides simple working status prompt and troubleshooting
Product display
Schematic diagram of front panel
10M/100M/1G/2.5Gbps RJ45 Port 10M/100M/1G/2.5Gbps PoE Port
10M/100M/1G/2.5Gbps Rj45 Port
*10M/100M/1G/2.5Gbps RJ45 Port + 21G/10G SFP+ Port**
Indicator definition
- PWR: When on, the switch is connected to the power supply
- PoE: When on, PoE starts to supply power
- LED indicator
Schematic diagram of rear panel
Port 2.5G Desktop style
Port / 8‑Port 2.5G Desktop style
Product supporting list
Installation guide
Power socket specification
The power line of the switch adopts single‑phase two‑wire power socket. The left foot is zero line and the right foot is live line. Please check before operation
Figure 1.1.1 single phase two wire power socket
Connect the power cord
- Check that the selected power supply is consistent with the power supply requirements marked on the switch;
- For the external type, connect the power adapter, connect AC100 ~ 240V, 50 ~ 60Hz and DC input 52V, as shown in Figure 1.1.2.
Figure 1.1.2 schematic diagram of power connection
Post installation inspection
Please check the following items after installation
- Check whether there is enough heat dissipation space around the switch and whether the air circulation is smooth
- Check whether the power supply of the power socket meets the specification of the switch
- Check that the power supply, switch, rack and other equipment are properly grounded
Matters needing attention
To avoid equipment damage and personal injury caused by improper use, please follow the following precautions
- During installation, keep the power off, wear anti‑static wrist, and ensure that the anti‑static wrist is in good contact with the skin to avoid potential safety hazards;
- The switch can work normally only under the correct power supply. Please confirm that the power supply voltage is consistent with the voltage marked by the switch;
- Before the switch is powered on, please confirm that it will not cause overload of the power circuit, so as not to affect the normal operation of the switch or even cause unnecessary damage;
- In order to avoid the danger of electric shock, do not open the shell when the switch is working, and do not open it by yourself even when it is not charged;
- Before cleaning the switch, pull out the power plug of the switch. Do not wipe it with wet fabric or clean it with liquid;
- Avoid placing other heavy objects on the surface of the switch to avoid accidents
Technical parameter
Product parameters and appearance are subject to update or change without notice. Please refer to the official website by yourself
Product packing list
Open the product packing box and take out the objects carefully. Please check the packing list carefully to ensure that all items are included and undamaged. If there is any shortage or damage of accessories, please contact us in time
Visit Here: http://www.mokerlink.com/support/ or Scan QR Code
Wuhan MokerLink Technology Co. Ltd Rm10,13/F, Main Building 7,Changhang Lanjing International, No.116 Gaoxin Ave.,Hongshan Dist., Wuhan, China http://www.mokerlink.com support@mokerlink.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>