LINDY 38084 V2 4×2 HDMI 4K60 Matrix User Manual
- June 3, 2024
- LINDY
Table of Contents
LINDY 38084 V2 4×2 HDMI 4K60 Matrix User Manual
Safety Instructions
Danger: Electric Shock Risk.
WARNING:
Please read the following safety information carefully and always keep this
document with the product.
Failure to follow these precautions can result in serious injuries or death
from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which may result in death.
This device is a switching type power supply and can work with supply voltages
in the range 100 – 240 VAC For worldwide usability four different AC adapters
are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand
type. Use the appropriate AC adapter as shown in the picture and ensure it is
firmly secured in place and does not detach by pulling before installing into
a power socket.
To reduce risk of fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Instructions for Use of Power Supply
Attach the required adapter to the plug. Push the adapter firmly, twist until
the latch secures the adapter.
To remove, push the button and twist in the opposite direction.
Introduction
Thank you for purchasing the Lindy 4×2 HDMI 4K60 Matrix Switch. This product
has been designed to provide trouble free, reliable operation. It benefits
from both a LINDY 2-year warranty and free lifetime technical support.
To ensure correct use, please read this manual carefully and retain it for
future reference.
This matrix is a high-performance solution for distributing content from
multiple source devices to two displays.
Supporting HDMI 18G signals, this matrix allows for the transmission of clear
4K Ultra HD 60Hz resolutions, while additional support for High Dynamic Range
ensures video content can be seen with enhanced brightness, greater contrasts,
and a much wider colour gamut, perfect for digital signage displays in retail
or hospitality or creating engaging educational setups.
Package Contents
- HDMI Matrix
- IR Remote Control and CR 2025 Battery
- 5VDC 2A Multi-country Power Supply (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm
- This Manual
Features
- HDMI 2.0 18Gbps, HDCP 2.2 Compliant
- Supports resolutions up to 3840×2160@60Hz 4:4:4 8bit, with HDR support
- Supports pass-through HDMI audio up to 7.1CH
- Simultaneous audio extraction to To slink (Optical), Coaxial and 3.5mm Analogue Audio
- Automatic downscaling – 4K to 1080p
- ARC (Audio return Channel) Support for both HDMI Outputs
- EDID Management
- Control switching via push buttons on the unit and IR remote
Specification
Input: 4 x HDMI Type A (Female)
Output: 2 x HDMI (Female), 2 x 3.5mm (Female), 2 x Coaxial (Female), 2 x
TopLink (Optical) (Female)
- Black, Metal Housing
- IR Support: 38kHz
- Operating Temperature: 0°C – 70°C (32°F – 158°F)
- Storage Temperature: -10°C – 80°C (14°F – 176°F)
- Humidity: 5 – 90% RH (non-condensing)
Installation
Please ensure all devices are switched off before making any connections.
Connect the source devices such as a PC, Blu-ray player or games console to
the HDMI matrix input ports.
Then connect the displays to the HDMI matrix output ports. When all the
connections are made, connect the power supplies.
Once all the connections have been made, switch on the devices in this order:
displays, HDMI Matrix, source devices. Please allow a few minutes for the
devices to handshake and for the signals to appear.
Product Diagram
Front & Rear Panel.
- 5VDC: Connect the 5VDC 2A Power Supply.
- HDMI Input 1 -4: Connect to an HDMI source with an HDMI cable.
- HDMI Output A & B: Connect to an HDMI display using HDMI cable.
- 3.5mm Audio Out: Connect to a 3.5mm analogue audio output using a 3.5mm cable.
- Coaxial Audio Out: Connect to a coaxial audio output using a coaxial cable.
- TopLink (Optical) Audio Out: Connect to a TopLink (Optical) audio output using a Optical cable.
- Input – Output A LED Indicators: The corresponding Input – Output configuration will illuminate.
- Input – Output B LED Indicators: The corresponding Input – Output configuration will illuminate.
- ARC LED: The LED will illuminate when ARC is turned On and output the display audio via the Tos Link & Coaxial outputs. If ARC is off, the LED will not illuminate and output the HDMI Input audio via the 3.5mm, Tos link and Coaxial output ports.
- 2.0CH/5.1Ch/Pass LED Indicator: Indicates the audio format in use.
- IR: IR Signal Receiver Eye.
- Output A / B Switch: Push to switch between output A & B.
- ARC A / B: Push to turn on the ARC function for Output A or B.
- Power LED Indicator: This LED will illuminate once power is provided to the matrix.
IR Remote
- Power: Press once to turn on the matrix, press again to turn off the matrix.
- Mute: Press to turn on or off audio extraction function.
- ARC A / B: Press to turn on or off the ARC (Audio return Channel) Function.
- On / Off: Press once to turn on the input connected to the corresponding output, press again to turn off.
- 2CH/5.1CH/Pass: Select the desired audio extraction format.
- 1 – 4: Select the corresponding Input for each output
Troubleshooting
There is no display on the screen.
It has been found that there are significant differences in the cable
lengths/types and even input ports which can be used on different brands of
display using HDMI 18G 4K@60Hz resolutions. If problems are experienced,
please apply the following steps:
- Try a different input port on the display.
- Reduce the cable length on the Input and Output to 1m.
- Try a different type of 1m HDMI Cable.
- For several HDMI devices it may be helpful to unplug and re-connect their HDMI connection to reinitiate the HDMI handshake and recognition.
- Power off all the devices, then power on in this order: first, the matrix, then the display and finally the source.
No Audio Output
- If there is no audio output from the 3.5mm connection, this can be caused by using the incorrect audio format. 5.1CH and 7.1CH audio is not support via 3.5mm connection, therefore please select the 2.0 CH audio format using the IR remote or push button.
Lindy regularly checks and tests our product range to ensure maximum
compatibility and performance.
For the most up to date version of this manual, please refer to your local
Lindy website, search for the relevant part number and find the manual under
Downloads.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products.
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process.
Each individual EU member state, as well as the UK, has implemented the WEEE
regulations into national law in slightly different ways. Please follow your
national law when you want to dispose of any electrical or electronic
products. More details can be obtained from your national WEEE recycling
agency.
Battery Remark:
Do not put empty batteries in your domestic waste bin as they will not be
recycled. Empty batteries can be returned for recycling at our trade counter
or at your local household recycling center.
The raw materials enclosed in batteries such as Zinc, Iron and Nickel can be
reused to a very large proportion. The recycling of batteries and
disused/obsolete electronic equipment is one of the most efficient environment
protection actions you can easily take.
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-On-Tees, TS17 9JY
England
[email protected],
T: +44 (0)1642 754000
