LINDY 21710 HDMI DP and VGA KVM LCD 17 Inch Full HD Console User Manual

: October 30, 2023
: LINDY

Table of Contents

LINDY 21710 HDMI DP and VGA KVM LCD 17 Inch Full HD Console
Introduction
Package Contents
Features
Specification
Installation
Introduction
Package Contents
Features
Specification
Display
Installation
Operation
Recycling Information
CE/FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LINDY 21710 HDMI DP and VGA KVM LCD 17 Inch Full HD Console

LINDY-21710-HDMI-DP-and-VGA-KVM-LCD-17-Inch-Full-HD-Console-
PRODUCT

Introduction

The HDMI, DP & VGA KVM LCD 17 Full HD Console is designed to provide trouble- free, reliable operation. It comes with a LINDY 2-year warranty and free lifetime technical support. This terminal allows an operator to conveniently control and manage a PC, server, or KVM switch from a single 19 rack-mountable keyboard, touchpad, and LCD display console. It supports analog or digital FullHD resolutions up to 1920×1080.

Package Contents

LCD KVM Console
2 x bracket
Schuko to IEC C13 power cable
12 x screw (M5*12)
Lindy Manual

Features

19 rack mount 1U single rail design
Standard English QWERTY keyboard (104 keys) with numeric pad and LED indicators and touchpad
17.3 TFT LCD panel, supports resolutions up to 1920×1080@60Hz
Automatic video-off when console drawer is closed below 30 degrees
Support rack cabinet in-depth from 52 to 91cm with adjustable brackets
USB, HDMI, DisplayPort, or VGA inputs and outputs to connect a source device and an additional console if required
USB Type A HID port on the front panel to connect an additional mouse, keyboard, or storage device
Menu OSD and power buttons
Built-in power supply 12V, 5.42A with IEC C14 port

Specification

Front

Latch Locks: Lock or unlock the LCD console drawer when it’s closed (see Operation paragraph).
Upper Handle: Pull out/Push in and Open/Close the LCD console drawer.
USB Type A Female: Connect an additional USB HID peripheral such as mouse, keyboard or storage device.

Rear No information provided in the manual.

Installation

Make sure that the surface or the shelf where the unit has to
be placed is stable and supports the weight of the unit.
Make sure that there is enough space to rail-mount the unit inside a 19 Rack.
Make sure the place has enough ventilation, away from sources of heat, dust, and water.
Convenient connection of the unit to related devices should be well considered.
The rail-mounted unit can’t be used as a shelf or workspace.
Adjust the length of both brackets to match the mounting depth of the rack (adjustable depth from 520 to 908mm).
Fasten the brackets to the rack pillars securely with the screws and cage nuts.

WARNING

Please read the following safety information carefully and always keep this document with the product.
Failure to follow these precautions can result in serious injuries or death from electric shock, fire or damage to the product.
This device has a switching type auto-sensing power supply and can work with supply voltages in the range 80…264 VAC.
Touching the internal components or a damaged cable may cause electric shock, which may result in death.

To reduce risk of fire, electric shocks or damage:

Do not open the product. There are no user serviceable parts inside.
Only qualified servicing personnel may carry out any repairs or maintenance.
Never use damaged cables.
Do not expose the product to water or places of moisture.
Do not use this product outdoors it is intended for indoor use only.
Do not place the product near direct heat sources. Always place it in a well-ventilated place.
Do not place heavy items on the product or the cables.
Please ensure any cables are firmly secured and locked in place before inserting into a power socket

Introduction

Thank you for purchasing the HDMI, DP & VGA KVM LCD 17″ Full HD Console. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support.
To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy LCD KVM Console allows an operator to conveniently control and manage a PC, server or KVM switch from a single 19″ rack mountable keyboard, touchpad and LCD display console.
This terminal provides HDMI, DisplayPort and VGA inputs to connect many different kinds of legacy or new sources, supporting analogue or digital FullHD resolutions up to 1920×1080.

Package Contents

LCD KVM Console
2 x bracket
Schuko to IEC C13 power cable
12 x screw (M5*12)
Lindy Manual

Features

19” rack mount 1U single rail design
Standard English QWERTY keyboard (104 keys) with numeric pad and LED indicators and touchpad
17.3” TFT LCD panel, supports resolutions up to 1920×1080@60Hz
Automatic video‐off when console drawer is closed below 30 degrees
Support rack cabinet in‐depth from 52 to 91cm with adjustable brackets
USB, HDMI, DisplayPort or VGA inputs and outputs to connect a source device and an additional console if required
USB Type A HID port on the front panel to connect an additional mouse, keyboard or storage device
Menu OSD and power buttons
Built-in power supply 12V, 5.42A with IEC C14 port

Specification

Operating Temperature: 0°C – 40°C (32°F – 104°F)
Storage Temperature: -5°C – 60°C (23°F – 140°F)
Relative Humidity: 5 – 90% RH (Non-condensing)
Metal Housing
Color: Black
Power Consumption: 16.5W

Display

Diagonal size: 17.3”
Pixel number: 1920×1080, 127PPI
Panel: active matrix TFT LCD with LED backlight unit
Brightness: 300 cd/m²
Color support: 262K
Contrast ratio : 700:1 (typ.)
Viewing angle: 89/89/89/89 (Typ.) (CR≥10)
DDC, DDC2, DDC2B

Front

Latch Locks: Lock or unlock the LCD console drawer when it’s closed (see Operation paragraph).
Upper Handle: Pull out/Push in and Open/Close the LCD console drawer.
USB Type A Female: Connect an additional USB HID peripheral such as a mouse, keyboard, or storage device.

Rear

Grounding wire.
AC INPUT: Connect a IEC C13 mains cable.
Power switch: Power the unit ON/OFF.
USB Type A Female: Connect a USB standard keyboard for a local console.
USB Type A Female : Connect a USB standard mouse for a local console.
VGA Female: Connect a VGA monitor for a local console.
DP Female: Connect a DisplayPort monitor for a local console.
HDMI Female: Connect a HDMI monitor for a local console.
USB Type B Female: Connect to a USB port of the source device.
VGA Female : Connect to a VGA output of the source device.
DP Female: Connect to a DisplayPort output of the source device.
HDMI Female: Connect to a HDMI output of the source device.

Installation

Before starting to install the unit:

Make sure that the surface or the shelf where the unit has to be placed, is stable and supports the weight of the unit
Make sure that there is enough space to rail-mount the unit inside a 19” Rack
Make sure the place has enough ventilation, away from sources of heat, dust and water
Convenient connection of the unit to related devices should be well considered
The rail-mounted unit can’t be used as a shelf or workspace

Adjust the length of both brackets to match the mounting depth of the rack (adjustable depth from 520 to 908mm).
Fasten the brackets to the rack pillars securely with the screws and cage nuts.
Slide the unit between the mounted brackets.
Fasten the unit to the rack pillars with two screws.

Operation

Once the unit is rack mounted and/or firmly secured, it is safe to use.

Pull out the LCD console drawer.
Push the latch levers toward the center to release the locking position.
Flip up the LCD Console drawer.
To close the LCD Console drawer, fold it and push both latches in the shown direction before sliding the drawer into the rack. Keep pushing the latches until the drawer is completely back into the rack.

Connecting a source and a local console

Before powering on the unit, please connect a source such as a PC, Server or KVM Switch on Server Console ports using a USB Type A Male to Type B Male cable (1) and one of the three video inputs using a VGA, DisplayPort or HDMI Male to Male cable (2).
If needed, please connect a mouse, keyboard (1) and monitor (2) to Local Console ports to add an additional console. Both the LCD console drawer and the local console can be used at the same time to control the source.
Please Note: the same type of video interface has to be used on both Local and Server consoles.
If needed, connect a USB device (mouse, keyboard or mass storage) to the USB Type A Female port on the front panel of the unit.
Once all connections are made, connect the power cord to the AC INPUT and power on the unit.

OSD Buttons

LED indicator:
- Off= the display is powered-off
- On= the display is powered
- on – Blinking= the display is in power-save mode
POWER button : Power on/off the display.
MENU button: Open the OSD menu & Back key (when OSD menu is opened).
SELECT button: Select the video input (VGA, DisplayPort or HDMI) & Enter key (when OSD menu is opened).
DOWN button: Press to move down or left (when OSD menu is opened).
UP/AUTO button: Optimize the video settings (only available for VGA input) & press to move up or right (when OSD menu is opened).

OSD Menu

Picture: adjust brightness, contrast, sharpness, aspect ratio, ultra vivid and DCR (dynamic contrast ratio).
Color: chose color effect and adjust saturation, gamma, temperature and RGB.
Input: select the video input (VGA, DisplayPort or HDMI).
OSD:
Menu Time: set the time duration in seconds to let the OSD active after the last button is pressed.
OSD H / V Position: adjust the horizontal (H) and the vertical (V) position of the OSD.
Reset: reset all settings to factory defaults.
Display (only for VGA input):
Clock: adjust the clock to synchronize the sampling clock of the display with the pixel clock of the source.
Phase: adjust the phase to synchronize the frequency settings of the display with the frequency output of the source.
H / V Position: move the screen image left and right (H) or up and down (V).
Auto Adjust: optimize the visual settings.
Information: shows the current video input information.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products Europe, United Kingdom In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.