Lepro PR902102 Smart Bedside Lamp Bedroom Table Lamp User Manual
- June 6, 2024
- Lepro
Table of Contents
LED Curtain Lights
8 Lighting Modes
Specifications
PR4300006-WW-UK
220-240 V~ / 50Hz / 306 LED s / 4.5 W / 3000 K / PF>0.5 / 0.12 A
PR4300006-WW-EU
3 x 3 m (9.84 x 9.84 ft) / IP44 /-25 °C – 40 °C / -13 °F – 104 °F
PR4300006-DW-UK
220-240 V~ 50Hz / 306 LED s / 4.5 W / 6000 K / PF>0.5 / 0.12 A
PR4300006-DW-EU
3 x 3 m (9.84 x 9.84 ft) / IP44 /-25 °C – 40 °C / -13 °F – 104 °F
4300006-WW-US-a
120 V~ / 60 Hz / 4.5 W / 3000 K / PF>0.5 / IP44
-25 °C – 40 °C / -13 °F – 104 °F
4300006-DW-US
120 V~ / 60 Hz / 4.5 W / 6000 K / PF>0.5 / IP44
-25 °C – 40 °C / -13 °F – 104 °F
17 LEDs x 18 Strings. Measurement deviation of ±1mm may exist unless specified.
Installation
- Hang the horizontal stretch of cord.
- Untie and unfurl the vertical light strands.
- Connect the plug to the power supply.
- Press to select light modes.
Combination
In Waves
Sequential
Slo-glo| Chasing/Flash
Slow Fade
Twinkle/Flash
Stay On
---|---
Notes & Precautions
- Please inspect the string lights carefully before
- Use The input voltage as indicated on the package.
- if Mere is any damage to me cord. please cut off the power and stop using The product immediately.
- Do not use metal or sharp objects to fix the curtain light.
- To avoid electric shock. please do not turn on the curtain light before finishing installation.
- This curtain light cannot be cut or be connected with other string light.
- The LEDs are not replaceable.
- Do not connect the light to power supply while it is rolled up or in the package.
- Use only with the provided transformer.
- This light is intended for decorative purpose.
- Luminaires not suitable for covering with thermally insulating
- the light source of this luminaire is not replaceable: when the light source reaches its end of life the whole luminaire shall be replaced.
- where breakage or damage to lamps occurs the chain must not be usecVenergized but disposed of safely.
- FOR INDOOR USE
General Troubleshooting
If the light does not work please cut off the power and:
- Ensure the plug is properly connected to the power supply.
- Ensure the input voltage is correct and there are no circuit
- If the problem persists. stop using and contact a professional or your retailer for
Routine Maintenance
- To ensure better lighting. clean at least once a year.
- Do not use liquid detergent or chemical solvents on the product.
- Switch off the power before maintenance work.
- Components cannot be replaced.
This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.
LE Innovation Inc
3651 Lindell Rd Ste D, Las Vegas, NV 89103, USA
www.lepro.com +1
866-287-2558
cs.oc@lepro.com
Manufacturer
LE Innovation Limited
One Spencer Dock, North Wall Quay, Dublin 1, D01 X9R7, Ireland
www.lepro.de +49
800-723-6202
cs.oc@lepro.de
UK Importer:
Lighting EVER Ltd.
93 Addy House, Rotherhithe New Road, London, SE16 2PD, United Kingdom
www.lepro.co.uk +44
800-802-1244
cs.oc@lepro.co.uk
Made in China
The device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.