LINDY 43333 USB 3.2 Gen 1 DP 1.4 Type C Hybrid Cable User Manual

: May 15, 2024
: LINDY

Table of Contents

Introduction
Package Contents
Features
Installation
Recycling Information
CE/FCC Statement
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LINDY 43333 USB 3.2 Gen 1 DP 1.4 Type C Hybrid Cable

Introduction

Thank you for purchasing the USB 3.2 Gen 1 & DP 1.4 Hybrid Cable. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.

This fully featured USB 3.2 Gen 1 & DP 1.4 Type C Hybrid Cable allows a USB Type C device or display to be connected 8m/10m away from the computer, while transferring data with up to 5Gbps, video in resolutions up to 4K 30Hz and USB Power Delivery for charging.

Package Contents

USB 3.2 Gen 1 & DP 1.4 Type C Hybrid Cable
This manual

Features

USB 3.2 / 3.1 Gen 1 specification with data transfer rates up to 5Gbps
Supports DisplayPort Alternate Mode
Supports DP 1.4 (2 lanes)
Supports video resolutions up to 4K 3840×2160 30Hz
Interfaces: USB Type C male to USB Type C male
Supports Power Delivery up to 60W (20V 3A)
Flexible cable (6.5mm diameter) with narrow bend radius for easier installation
Highly resistant to EMI/RFI interference
Compatible with USB Type C equipped computers

Installation

Connect the USB Type C connector marked “Source” to a free USB Type C port on your computer. Your computer will recognize the new hardware and install any required drivers automatically. Now connect the other USB Type C plug to your USB device or display.

Please note:

USB devices which only support DP signals over 4 lanes might not be compatible.
Displays must have set USB settings to USB 3.0 in order to receive video via Type C.
Please ensure the connector labelled “Source” is connected to the source device. The cable will not work correctly in the opposite direction.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products Europe, United Kingdom

In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

CE/FCC Statement

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.

UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.

FCC Certification

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.