LINDY 350m Fibre Optic USB 3.0 Extender User Manual
- June 3, 2024
- LINDY
Table of Contents
LINDY 350m Fibre Optic USB 3.0 Extender
Safety Instructions
WARNING
Please read the following safety information carefully and always keep this
document with the product. Failure to follow these precautions can result in
serious injuries or death from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which may result in death. This device is a switching type power supply and
can work with supply voltages in the range 100 – 240 VAC For worldwide
usability four different AC adapters are enclosed: Euro type, UK type,
US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter
as shown in the picture and ensure it is firmly secured in place and does not
detach by pulling before installing into a power socket. To reduce risk of
fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables. Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Instructions for Use of Power Supply
To connect the adapter
Slide the desired plug adapter into the power supply until it locks into place
.
To remove the adapter
Press both sides of the latch as indicated below While pressed, slide the
plug adapter for the power supply.
Introduction
Thank you for purchasing the 350m Fibre Optic USB 3.0 Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. This Extender allows you to extend the distance between your host computer and a USB 3.1 Gen 1/3.0 device by up to 350m. It consists of a Transmitter with USB Micro-B and LC Duplex Multimode connector – and a Receiver with USB Type A and LC Duplex Multimode connector. LC Multimode Fibre Optic cable up to 350m length is used to connect the two units (not included).
Package Contents
- 350m Fibre Optic USB 3.0 Extender (Transmitter & Receiver) ·
- Multi-Country Power Supply 5V 3A with adapters (EU/UK/US/AUS) ·
- This manual
Features
- Extends USB connections up to a maximum of 350m using a Multimode fibre optic cable (not included), max. 350m with Multimode 50µm/125µm OM3
- USB 3.2 / 3.1 Gen 1 / USB 3.0 standard up to 5Gbps (not backwards compatible with USB 2.0)
- True plug and play, no drivers required · Supports all major USB operating systems
Specification
- Operating Temperature: 0°C to 50°C (32°F – 122°F)
- Storage Temperature: -20°C to 70°C (-4°F – 158°F)
- Dimension of each housing (WxLxH): 57x93x28mm (2.24×3.66×1.1in)
- Weight: Transmitter: 0.125kg (0.28lb), Receiver: 0.129kg (0.28lb)
Installation
Connect transmitter and receiver using a multimode fibre optic cable (not
included) with crossover LC Duplex. Then connect your USB 3.0 device to the
USB 3.0 A female port of the Receiver and the power supply with the Receiver.
Finally, connect the Transmitter to your host computer using a USB 3.1/3.0
Type Micro-B male to Type A or C male cable (USB cables not included).
Hersteller / Manufacturer
- LINDY-Elektronik GmbH LINDY Electronics Ltd Markircher Str. 20 Sadler Forster Way 68229 Mannheim Stockton-on-Tees, TS17 9JY Germany England Email: info@lindy.com , T: +49 (0)621 470050 sales@lindy.co.uk, T: +44 (0)1642 754000