LINDY 40930-2 Active DisplayPort 1.4 to HDMI 8K60 Adapter Cable User Manual
- October 30, 2023
- LINDY
Table of Contents
LINDY 40930-2 Active DisplayPort 1.4 to HDMI 8K60 Adapter Cable
Introduction
Thank you for purchasing the Active DisplayPort 1.4 to HDMI 8K60 Cable. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. This Lindy Active DisplayPort 1.4 to HDMI 8K60 Cable is a high-performance solution, which allows users to easily add external video capabilities to a computer featuring the DisplayPort 1.4. The HDMI connector of the adapter cable can be directly connected to the HDMI display – while the cable allows for more flexible positioning of the HDMI display than when using a box converter – perfect for a simple and adaptable installation.
Package Contents
- Active DisplayPort 1.4 to HDMI 8K60 Cable (No. 40930: 1m, No. 40931. 2m, No. 40932. 3m)
- This manual
Features
- Connect an 8K HDMI display to your computer´s DisplayPort port
- Supports HDMI resolutions up to 7680×4320@60Hz and 4096×2160@120Hz
- High Dynamic Range support provides deeper blacks, brighter whites, and a wider color gamut
- Plug & Play, no drivers required
Specifications
- Connector A: DisplayPort Male
- Connector B: HDMI Type A Male
- Housing Material: Zinc Alloy
- Chipset: VMM7100
- Supported Bandwidth: 48Gbps
- Maximum Resolution: 7680×4320 60Hz, 4096×2160 120Hz
- Nominal Attenuation: 100MHz-10GHz ≤ 24dB
- Minimum Bend Radius: 33mm (1.3in)
- Operating Temperature: -20°C – 40°C (-4°F – 104°F)
- Storage Temperature: -40°C – 80°C (-40°F – 176°F)
Installation
Connect the DisplayPort connector of the Lindy Active DisplayPort 1.4 to the HDMI 8K60 Cable to the DisplayPort port of the source device. Then connect the HDMI connector with the corresponding port of the display.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
- Europe, United Kingdom
- In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic
- products. More details can be obtained from your national WEEE recycling agency.
FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
- This device complies with part 15 of the FCC Rules.
- Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Manufacturer (UK)
- LINDY Electronics Ltd
- Sadler Forster Way
- Stockton-on-Tees, TS17 9JY
- England
- sales@lindy.co.uk, T: +44 (0)1642 754000.
Tested to comply with FCC standards. For home and office use. No. 40930-2 1st Edition, July 2022 lindy.com.