ZEBRONICS Zeb-Juke Bar 100A Soundbar User Manual

June 10, 2024
ZEBRONICS

ZEBRONICS-logo

ZEBRONICS Zeb-Juke Bar 100A Sound bar

Important Safety Instruction

Thank you for purchasing the ZEB-JUKE BAR 100A Sound bar. Please read this user manual carefully and keep for future reference Warning.

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)

  • To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user serviceable parts inside.
  • Refer servicing to qualified personnel only.

The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.

Important
This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.

Notice
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

  1. To prevent possible hearing damage, do not listen at high volume levels for long time periods or a sudden high volume level.
  2. Never use the device unsupervised! Switch off the device whenever you are not using it, even if not using it only for a short while.
  3. The appliance is not intended to be operated by means of an external timer or separate remote control system.
  4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  5.  Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
  6. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
  7. The apparatus must not be exposed to dripping or splashing liquid, no objects filled with liquids such as vases, should be placed on the apparatus.
  8. To prevent fire or shock hazard, do not expose this equipment to direct heat, rain, moisture or dust.
  9. Do not position this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
  10.  Do not place this unit close to a strong  magnetic field.
  11. Do not place the unit on a amplifier or receiver.
  12. Do not place this unit in a damp area as the moisture will affect the life of electric components.
  13.  Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
  14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
  15. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the LED TY. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set.
  16.  The mains plug is used to disconnect the device, the disconnected device should remain readily operable.

Important Safety Instructions

  1. Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
  2. Do not use this apparatus near water.
  3. Clean only with dry cloth.
  4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  5. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
  6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the apparatus.
  7. Only use attachments/accessories specified by the manufacturer.
  8. Unplug this apparatus during lightning storms or when unused for long periods of time.
  9. Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damage in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  10. The AC plug is used to disconnect the device, the disconnected device should remain readily operable. In order to disconnect the apparatus from the AC power completely, the AC plug must be removed from the AC outlet completely.

Important Notes

  • Safety and operating instruction manual should be retained for future reference.
  • The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom.
  • Do not install the product in the following areas:
  • Places exposed to direct sunlight or close to radiators.
  • On top of other stereo equipment that radiate too much heat-Blocking ventilation or in a dusty area.
  • Areas where there is constant vibration.
  • Humid or moist places.
  • Do not place near candles or other flames.
  • Operate the product only as instructed in this manual.
  • Before turning on the power for the first time, make sure the sound bar is plugged to power outlet.
  • For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.
  • Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

Power Source

This sound bar is designed to operate in DC 24V = 1.25A.

Product Representation

Sound Bar & Sub-Woofer

ZEBRONICS-Zeb-Juke-Bar-100A-Soundbar-01

  1. LED indicator
  2. STANDBY/POWER
  3. INPUT
  4. VOL+
  5. VOL-
  6. AUX
  7. COAXIAL
  8. HDMI (ARC)
  9. USB
  10. DCIN
  11. SUBOUT
  12. SW SPEAKER OUTPUT

Remote Control

  1. <!> : Standby mode for power on/off.

  2. INPUT: Input mode Selection.

  3. Vol+: Volume Increase.

  4. : Previous Track (Only work under USB & BT Mode).

  5. Vol-: Volume Decrease.

  6. TRE-: Treble Decrease.

  7. Bass-: Bass Decrease.

  8.  Mute: Mute Mode.

  9. “‘ / RESET
    Play/Pause : Play / Pause for Current Track (Only work under USB and BT Moreset
    Press and hold the button more than 2 sec. to Set all functions to manufacturer defaults.

  10. Next Track (Only work under USB & BT mode).

  11. TRE+ : Treble Increase.

  12. BASS+ : Bass Increase.

  13. EQ/PAIR
    EQ : Press in one time for one mode of EQ.

Music/Movie/News/Sport total four modes when circulate press the button in short time.
Pair: Press and hold more than 2 sec. to disconnect paired BT device. Press and hold more than 2 sec. to connect back last disconnect BT device.

Positioning the Sound Bar

Place on a flat Surface
Place the sound bar horizontally on a flat surface such as a TV unit or shelves and align it centrally with the TV screen. Allow some space between the speaker and the wall. Don’t place inside a cabinet or an a walled shelf. Follow this guidance for best sound output and good airflow around the sound bar.

OPERATE INSTRUCTIONS

Setting the Sound bar

  1. Plug the power cord in and the LED will light up.
  2. Press the power/standby button either in sound bar or remote control to select the mode you need with the remote controller. The indicator can change to different colors, representing different states:
    Blue : BT Mode
    Green : AUX Mode
    Cyan : HDMI (ARQ Mode
    Yellow : Coaxia I mode
    Pink : USB Mode

Powering On/Off

  1. Plug the sound bar adapter into a wall outlet, it will automatically enter standby mode.
  2. Short-press the power/standby button either in sound barro remote control to turn on the sound bar.
  3. To turn off, press either the STANDBY button on remote control or sound bar or unplug from wall outlet.

ZEBRONICS-Zeb-Juke-Bar-100A-Soundbar-05

Playing Audio via BT Connection

  1. Use “Input” button on the remote to activate BT mode. A Blue LED indicator will indicate that BT mode has been selected.

  2. Activate the pairing function on your phone of other compatible device and select” ZEB-JUKE BAR 100A”

  3. When successfully paired, you will hear a tone and the LED will stay on.

  4. The remote control includes BT mode playback controls
    Notes

    • If your pairing device switched off or manual disconnected, the sound bar will automatically enter pairing mode.
    • If the connected device is switched off or manual disconnected, the sound bar will automatically enter pairing successfully connected device will be re-established once you re-enter wireless range(10 meters). to connect to other devices, repeat the above pairing steps
    • There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode even if no device is paired, so switch off if not in use.

ZEBRONICS-Zeb-Juke-Bar-100A-Soundbar-06

Playing Audio via USB Port

When the USB flash drive is plugged in, the sound bar automatically switches to USB input mode. A Pink LED indicator will indicate that USB mode has been selected. This mode cannot be selected on the sound bar or remote control unless it is connected to a USB flash drive.

  1. Ensure that your USB flash drive contains MP3 audio files (other file types not supported).
  2. Connect the USB flash drive to the USB port on the sound bar (or your own USB extension cable connected to the USB port); music will automatically play.
  3. The remote control includes USB input mode playback controls.
    ZEBRONICS-Zeb-Juke-Bar-100A-Soundbar-07

Using the Soundbar

ZEBRONICS-Zeb-Juke-Bar-100A-Soundbar-08

Audio input(Aux)Connection

  1. Use the “Input” button on the remote to activate AUX mode. A green LED indicator will indicate that AUX mode has been selected.
  2. Playback functions (play/pause, tracks, pair) cannot be adjusted through the Sound Bar remote when in AUX mode.
    Note
    For some computers, you may need to access the audio control panel to manually set the sound bar as below picture.

ZEBRONICS-Zeb-Juke-Bar-100A-Soundbar-09

HDMI (ARC) Mode

  1.  Use the “Input” button on the remote to active HDMl(ARC) mode. A Cyan LED indicator will indicate that HDMl(ARC) mode has been selected.
  2. The Sound bar supports HDMI with Audio Return Channel(ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Sound bar by using a single HDMI cable
  3. Using a High Speed HDMI cable, connect the HDMI (ARC) connector on the sound bar to the HDMI ARC connector on the TV. The HDMI ARC connector on the TV might be labelled differently. For details, see the TV user manual.

ZEBRONICS-Zeb-Juke-Bar-100A-Soundbar-10

Coaxial Mode

  1. Use either the buttons on the Sound Bar or the “Input” button on the remote to active Coaxial mode. A yellow LED indicator will indicate that Coaxial mode has been selected.
  2. Playback functions (play/pause, tracks, pair) cannot be adjusted through the Sound Bar remote when in Coaxial mode. Others playback functions can be controlled from the buttons on the Sound Bar.

ZEBRONICS-Zeb-Juke-Bar-100A-Soundbar-11

Features

  • Multi Connectivity(BT v5.0 I HDMl(ARC) I Coaxial I USB I AUX)
  • 10.16 cm Subwoofer
  • LED indicator
  • Volume/Media Control
  • Compact Sound Bar with Dual Drivers
  • External Power Adapter
  • Glossy Finish
  • Powerful Bass
  • Remote control

Specifications

Output Power

  • Subwoofer :36 W
  • Sound bar  : 12Wx2
  • Total  :60 W

Driver Size

  • Subwoofer : 10.16 cm
  • Sound bar Impedance : 4Ox 2
  • Frequency response : 70Hz-20kHz
  • S/N Ratio : 66dB
  • Separation : 42dB
  • File format support : : MP3(USB)
  • Line  input : 3.5mm, Coaxial, HDMl(ARC)
  • Max supported memory size (USB) : 32GB
  • BT name :ZEB-JUKE BAR 1 ODA\
  • BT version : 5.0

Product Dimension (Wx Dx H)

  • Subwoofer :100x185x355mm
  • Sound bar : :410x74x64mm

Net. Weight

  • Subwoofer : 1.85 kg
  • Sound bar : :850g
  • Total : 2.7kg

Package Contents

  • Sound Bar : 1 U
  • Subwoofer : 1 U
  • QR Code Guide : 1 U
  • Power Adapter : 1 U
  • Remote control : 1 U

Troubleshooting

| |
---|---|---










output ll’omwundbar.

| Another inputs our cell’s selected.| Select an appropriate input source.
|

is adjusted tallow.

|

by remote controloronTV.

Help lowly!!rableoftheuniti1nat

connected property.

| Mikesell!!thatthepawl!!rcableoftheunitis

connect!!Doan: .w .allautletseo. .,rely.


input/1ckson1pliiyl»l;kd,:vlce;,reconnec;ted.

| Connect the input jllckonthe soundbl grand the output Jackson the play backdevla,.
the output Jackson the play backdevla,.




| When50undbilr1nd1Vorotherdevlces11’1l connectedby;in1udkic,;,blethroughTV(ARC) portoutput.Selectthecorrec;taudlolnput1nd  output .desire thud ; output setting   on the playback device to PCM format. Since the output formator oursoundbarls PCM ,l fltlsused. Theunitisoutaf the cooperating range
| |
---|---|---
| Theunitisoutaf the cooperating range| the output Jackson the play backdevla,.
| |
|
|
|
the output Jackson the play backdevla,.|
When50undbilr1nd1Vorotherdevlces11’1l connectedby;in1udkic,;,blethroughTV(ARC) portoutput.Selectthecorrec;taudlolnput1nd  output .desire thud ; output setting   on the playback device to PCM format. Since the output formator oursoundbarls PCM ,l fltlsused. Theunitisoutaf the cooperating range| Delete the connect lonprofileln the Bluetooth devke and then connect the Bluetooth devkit
So<.mdqualityofaudio

:::i::: td

poor and connection

is not stable

| ****

The Bluetooth reception is poor.

| ****

MO\/ethedeviceclosertothesoundb.1r

::u::;:;obstacle between the device and







:;s:’u d:,: !’:’ heard (Bluetooth mode)

| |
Bluetooth ls not selected as the lnputsoun:e| Select the Bluetooth as the lnputsource.
Pla)’back on the device has no been performed| Perform play beckon the device
Delete the connect lonprofileln the Bluetooth devke and then connect the Bluetooth devkit| output setting   on the playback device to PCM format. Since the output formator oursoundbarls PCM ,l fltlsused. Theunitisoutaf the cooperating range
|
Delete the connect lonprofileln the Bluetooth devke and then connect the Bluetooth devkit| Delete the connect lonprofileln the Bluetooth devke and then connect the Bluetooth devkit
| |



There is no sound from sound bar

(USB mode)

| ****

output setting   on the playback device to PCM format. Since the output formator oursoundbarls PCM ,l fltlsused. Theunitisoutaf the cooperating range

| ****


output setting   on the playback device to PCM format. Since the output formator oursoundbarls PCM ,l fltlsused. Theunitisoutaf the cooperating range

ISO 9001:2015 Certified Company
www.zebronics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals