LINDY 42701 50m Hybrid USB 3.0 Cable User Manual
- June 3, 2024
- LINDY
Table of Contents
LINDY 42701 50m Hybrid USB 3.0 Cable
Introduction
Thank you for purchasing the 50m Hybrid USB 3.0 Cable. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
The LINDY USB 3.0 Hybrid Cable extends a USB port by 50m far longer than is possible with standard or active copper cables, whilst retaining SuperSpeed transfer rates of up to 5Gbps. A more light and flexible construction makes this cable simple to install with cable trays and through conduit, whilst low RFI/EMI ensures that the cable can be installed in the most sensitive of environments.
Package Contents
- USB 3.0 Hybrid Cable
- USB A to Micro-B cable for power
- LINDY Manual
Features
- Extends USB port by 50m
- USB 3.2/3.1 Gen 1/USB 3.0 standard (5Gbps), backward compatible with USB 2.0/1.1 devices
- USB bus powered (600mA/5V) or powered by the host via USB A to the Micro-B power cable
- Supports USB3 Vision
- Plug & Play
- Minimum bending radius: 50mm
- Supports all major operating systems with USB support
- Temperature:
- 0°C to 50°C (operating)
- – 20°C to 70°C (storage)
- Relative Humidity: 5 to 90%
- Dimensions (LxWxH): Plug: 27x44x13mm (1.06×1.73x 0.51in), Socket: 26x82x14mm (1.02×3.23×0.55in).
Installation
Connect the USB Type A plug to your host computer´s USB port. Then connect your USB device to the USB Type A female port of the Hybrid Cable. Finally, connect the power cable if necessary.
Note:
The min. The bending radius of this cable is 50mm, never bend the cable to a
smaller radius because this would destroy the internal fiber cable. Never step
on the cable or put heavy pressure on it.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH Markircher Str. 20 68229 Mannheim Germany.
Email: info@lindy.com, T: +49 (0)621 470050.
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way Stockton-on-Tees, TS17 9JY England
sales@lindy.co.uk, T: +44 (0)1642 754000
Tested to comply with FCC standards.
For home and office use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>