LINDY 43385 2 Type C Hub and Gigabit Ethernet Converter User Manual

: May 15, 2024
: LINDY

Table of Contents

LINDY 43385 2 Type C Hub and Gigabit Ethernet Converter
Product Information
Introduction
Package Contents
Features
Installation
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LINDY 43385 2 Type C Hub and Gigabit Ethernet Converter

Product Information

Specifications:

Product Name : USB 3.2 Gen 2 Type C Hub & Gigabit Ethernet Converter
Model Number : 43385
Manufacturer : LINDY
Warranty : 2 years
Technical Support : Free lifetime support
Ports: 1x USB Type C upstream port, 1x RJ45 Ethernet port, 2x USB Type A downstream ports, 1x USB Type C downstream port
Compliance: IEEE 802.3/802.3u/802.3ab, IEEE802.3az
Power: Bus-powered
Compatibility : Computers equipped with USB Type C

Features:

Allows connection to a Gigabit Ethernet network via a Type C USB port
Provides three additional 10Gbps USB 3.2/3.1 Gen 2 ports
Ideal for ultrabooks or tablets with limited wired network connectivity and USB ports

Installation:

Plug the USB Type C plug of the converter into a free USB port on the computer.
Your computer will recognize the new hardware and install any required drivers automatically.
Connect an Ethernet cable to the Ethernet port of the converter.
Connect the other end of the Ethernet cable to an available network hub, switch, or router.
To use the USB hub, connect your USB devices to the USB Type A or Type C sockets of the converter.

Recycling Information:

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products.

CE/FCC Statement:

CE Certification: LINDY declares that this equipment complies with relevant European CE requirements

UKCA Certification: LINDY declares that this equipment complies with relevant UKCA requirements.

Contact Information:

Manufacturer (EU): LINDY-Elektronik GmbH, Markircher Str. 20, 68229 Mannheim, Germany

Email : info@lindy.com

Phone : +49 (0)621 470050

FAQ

Q: What should I do if my computer does not recognize the converter?
- A : Make sure the drivers are up to date and try using a different USB port on your computer. If the issue persists, contact our technical support for assistance.
Q: Can I use this converter with a device that does not have a USB Type C port?
- A : No, this converter is designed specifically for devices equipped with USB Type C ports.

Introduction

Thank you for purchasing the USB 3.2 Gen 2 Type C Hub & Gigabit Ethernet Converter. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.

The Lindy USB 3.2 Gen 2 Hub & Gigabit Ethernet Converter allows users to conveniently connect a laptop or tablet to a Gigabit Ethernet network via a Type C USB port and also provides three additional 10Gbps USB 3.2/3.1 Gen 2 ports.

This converter is ideal for ultrabooks or tablets that do not feature wired network connectivity and may only offer a limited number of USB ports.

Package Contents

USB 3.2 Gen 2 Hub & Gigabit Ethernet Converter
This Manual

Features

3 Port USB 3.2 Gen 2 Hub & Gigabit Ethernet interface
USB 3.2 / 3.1 Gen 2 specification up to 10Gbps
Complies with IEEE 802.3/802.3u/802.3ab, IEEE802.3az
Supports Full/Half Duplex Operation
Interfaces : 1x USB Type C male upstream port, 1x RJ45 female, 2x USB Type A female & 1x USB Type C downstream ports
USB bus-powered
Compatible with USB Type C-equipped computers

Installation

Plug the USB Type C plug of the converter into a free USB port on the computer. Your computer will recognize the new hardware and install any required drivers automatically.
Connect an Ethernet cable (not included) to the Ethernet port of the converter, then connect the other end of the Ethernet cable to an available network hub, switch or router.

To use the USB hub, simply connect your USB devices to the USB Type A or Type C sockets of this converter.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products

Europe, United Kingdom

In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

FCC Statement

CE Certification

LINDY declares that this equipment complies with relevant European CE requirements.

UKCA Certification

LINDY declares that this equipment complies with relevant UKCA requirements.

FCC Certification

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Manufacturer (UK):