Acuity Brands Corridor Enabled nLight User Guide
- June 4, 2024
- Acuity Brands
Table of Contents
Acuity Brands Corridor Enabled nLight
CA TITLE 24 2022 DESIGN GUIDE
WIRELESS cORRIDOR WITH nLIGHT AIR ENABLED FIXTURES
SEQUENCE OF OPERATION
- LIGHTS
- ALL LIGHTS ARE DIMMABLE
- ALL FIXTURES CONTROLLED ToGETHER OR
- INDEPENDENTLY
- MAXIMUM LEVEL CAN BE TASK TUNED TO ANY
- PERCENTAGE VIA PROGRAMMING
OCCUPANCY
- FIXTURES AUTOMATICALLY TURN OFF OR OPTIONALLY CAN BE CONFIGURED
- TO DROP TO LOW DIM SETTING OF AT LEAST 50%
- WHEN SPACE BECOMES VACANT
DAYLIGHT
- NOT REQUIRED IF ROOM HAS <24 FT2. OF
- GLAZING OR LIGHTING LOAD 120W IN THE
- SKYLIT AND THE SIDELIT DAYLIT ZONE
- SMOOTH cONTINUOUS DIMMING
- CUSTOM GROUPING OF FIXTURES INTO
- SEPARATE DAYLIGHT ZONES (MAX.
- NUMBER OF ZONES = NUMBER OF FIXTURES)
MANUAL
- MASTER ON/OFF& RAISE /LOWER CONTROL OF ENTIRE SPACE
ADDITIONAL OPTIONS:
- SURFACE OR RECESSED MOUNT SENSORS ALSO AVAILABLE
- SPACE/ZONE CAN BE CONNECTED TO NLIGHT BACKBONE TO ENABLE NET-WORK CONTROL OR ADR (AUTOMATIC DEMAND RESPONSE)
- CONTROL HVAC SYSTEMS vla AN OPTIONAL RELAY “AR” OR THROUGH THE BACNET ECLYPSE CONTROLLER.
SUPPORTS THE FOLLOWING REQUIREMENTS:
- FULL PARTIAL AUTO-OFF VIA OCCUPANCY SENSOR (SECTION 130.1c)
- AREA CONTROL (SECTION 130.1a) AUTOMATIC OFF vla
- PROGRAMMABLE TIME CLOCK (SECTION130.1c)
- AUTOMATIC DEMAND RESPONSE (ADR) READY (SECTION 130.1e)
Note : Contact your local lighting agent for more information on nLight enabled fixtures
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>