2BC25-YINPAGE-FREE1 Free 1 Wireless Headset Instructions

2BC25-YINPAGE-FREE1 Free 1 Wireless Headset

Instruction Manual

1. Scope of use:

Cell phone; computer (with Bluetooth or USB adapter);

2. Key function definition:

1: Long press on / off; double-click on the game / music mode;
2: LED indicator light is unpaired red and blue flashing, the connection light is off; charging red light and full electric blue light;
3: Click the volume increase, the maximum sound (du); long press the next song;
4: Click play pause, double-click to wake up voice assistant; call: click Answer, click hang up, long press refuse to listen; click 5 times;
5: click the volume reduction, the minimum sound (du); long press the last song;
6: Type-C charging interface
7: Call microphone; TYPE-C external audio input;

3. Charging

The Bluetooth headset has a built-in rechargeable battery. The battery power of the new headset is not sufficient. Before the first use, please charge for at least 5 hours to make the power power sufficient. Afterwards, the charging will take about five hours. The red light is on when charging, and the blue light is saturated.

4. Turn on, turn off, reconnect, and match

You must pair with your phone (or other Bluetooth device) before you use your Bluetooth headset.

1. Press the 1 button for about 3 seconds after the shutdown state, the “beep” sound of the headset flashes, and the red and blue lights are flashing alternately. After starting up, the paired device is automatically connected. If the paired device cannot be connected, enter the paired state to search for the peripheral Bluetooth device.
2. Search for the Bluetooth device on your Bluetooth mobile phone (please refer to the mobile phone instructions for details). A search will find a new device named “BM 1069” in the device list.
3. The BM 1069 will automatically pair up and connect with the mobile phone. After the pairing connection is successful, the headset will make a “loud” sound and the blue light will extinguish.
pay attention to: During the pairing process, some mobile phones require to enter the matching password, please enter “0000”

If the headset does not find the paired device within 5 minutes or reconnects to the paired device, it will automatically shut down.
If the headset is connected to a Bluetooth device, you need to turn off the paired Bluetooth device or tap the MFB 4 key five times (clear pairing) before pairing the new Bluetooth device.
In the boot state, press the 1 key for 3 seconds, the red indicator light flashes once, the earphone emits a “beep” sound, shut down.

5. Low-voltage automatic detection and shutdown

When the local voltage is less than 3.3V, the red light flashes, and the headset will beep twice every 30 seconds. When the voltage is below 3V. Please charge in time.

Product Usage Instructions

1. Charging

Ensure the headset is charged when the voltage falls below 3.3V.
Connect the headset to a power source using the provided charging cable.

2. Pairing with Devices

To use with a cell phone or computer, ensure Bluetooth is enabled on the device. Put the headset in pairing mode and select it from the available devices on your phone or computer.

3. Low-Voltage Alert

If the red light flashes and beeping occurs every 30 seconds, charge the headset immediately to prevent shutdown due to low voltage.

4. Maintaining Connection

To ensure a stable connection, keep the headset within range of the connected device and avoid interference by increasing separation from other electronic equipment.

5. Safety Precautions

Consult the dealer or a technician if you experience difficulties with the headset. The device meets general RF exposure requirements and can be used safely in portable conditions.

Specifications

• Product Name: YINPAGE Free 1 Wireless Headset
• Compatible Devices: Cell phone, computer (with Bluetooth or USB adapter)
• Key Functions: Low-voltage automatic detection and shutdown
• Voltage Thresholds: Flashes red light when voltage is less than 3.3V, beeps twice every 30 seconds below 3V

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Frequently Asked Questions (FAQ)

Q: What should I do if the headset does not pair with my device?

A: Make sure the headset is in pairing mode and that Bluetooth is enabled on your device. Try restarting both devices and attempt pairing again.

Q: How long does the headset need to charge for?

A: The charging time may vary but typically takes around 2-3 hours for a full charge.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>