SuperBox S5MAX Android 12 TV Box User Guide
- August 7, 2024
- Superbox
Table of Contents
User
Guide
S5MAX
Specification
- Android12
- Processor Quad-core ARM Cortex TM -A53
- GPU Quad-core Mali-T720 MP2 @ 600Mhz
- Memory4GB DDR3
- Internal Storage 64 GB EMMC
- Support Video Decoder: H.265 10bit up to HP level 5.1: 6K4K2K@30fps (Up to 250 Mbps)
- Support audio formats: MP3, WMA, AAC, FLAC etc.
- Support photo formats: JPG, JPEG, BMP, GIF, PNG
- USB2.0X1,USB3.0X1 Host connectors and SD/MMC card reader.
- Network Rj45 1D OOM E themet; Support 2.4Ghz2/5.0Ghz Wi-Fi
- Composite Audio/Video output, support all television.
- Support all standard SD/HD
Package Contents
| NO. | Picture | Name | Piece |
|---|---|---|---|
| 1 | Smart Media Player | 1 | |
| 2 | IR remote control | 1 | |
| 3 | Power Adaptor | 1 | |
| 4 | HDMI Cable | 1 | |
| 5 | User Guide | 1 |
Note: Other contents are optional.
Connection Diagram
HDMI connection
a. Connect HDMI cable into the product interface, the other side into a TV
set.
b. Set the TV Output Display Settings to 720p or 1080p and then transferred to
the corresponding TV HDMI Component Video status.
A/V connection
If your TV have no HDMI connecter, Don’t worry! you can connect your TV via AV
cable.
Connect AV cable into the product interface, the other side into a TV set.
Settings
Move to (Settings] icon, press (ok] button to enter into system settings. You
will see the menu on the right 
Wi-Fi
With Wi-Fi enabled, you’ll need to select your network’s name and enter the
password An on screen keyboard should appear if you’re using the standard
infrared remote control.
Ethernet
If you will use a network cable instead of Wi-Fi, please select this option
[DHCP] instead.
Troubleshooting
Warning
Under any circumstances, Never try to repair the device by yourself, it will
void the warranty. if any issue occur, read the following instructions on how
to troubleshoot the device.
If you are unable to resolve the issue, please consult your dealer for help.
| Problem | Solution |
|---|---|
| No signal on the TV | 1) Check if the HDMI or AV cable is securely connected. |
- Check if you have selected the correct input source on your TV.
Can not turn on your Smart TV Box| 1) Check if the power connector is completely plugged into the DC socket of your Smart TV Box. - Check if the power supply is stable.
Can not connect to network| 1) Make sure that the network cable is securely connected and the Ethernet works well. - Make sure that WiFi network is connected and the security key for the encrypted network is correct.
- Make sure that you select the correct IP address Settings.
Remote Control does not respond| 1) Make sure that the batteries are good. - Make sure that the distance between the remote control and your Smart TV
Box is no longer than 8 meters.
Some TV can not display entire screen| Setup the screen display position of your Smart TV Box.
Settings->display->Display position
Preface
Thank you for choosing our Smart Media Player.
For your convenience and ease of use, we created this manual.
Please read it as a reference on how to properly use TV box.
FCC Statement
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>