SAMSON DEU1 Headset and LMU1 Lavalier Bundle with UP1 USB Adapter User Guide
- June 3, 2024
- SAMSON
Table of Contents
SAMSON DEU1 Headset and LMU1 Lavalier Bundle with UP1 USB Adapter
Quick Start
- Connect LM8 (LMU1 bundle) or DE5 (DEU1 bundle) to UP1’s threaded 3.5 mm (1/8”) microphone input jack. Headphones or earbuds can be connected to the 1/8” headphone output jack depending on the user’s application.
- Plug the USB-C, or USB-A adapter into a desktop or laptop computer, tablet, or smart device. LED lights are white indicating a proper connection.
- NOTE: Playback volume and microphone gain must be adjusted using the host device, such as a computer, laptop, smartphone, or tablet.
- Press the MUTE button to mute or unmute the audio signal from the connected microphone (LM8 or DE5). MUTE = RED color LED, WHITE color LED is normal operation.
Specifications
- Microphone Input 2.1KΩ source used for measurements
- I/O 1/8” mono input T: signal +3VDC mic bias, R: n/c, S: ground
- Frequency Response 12Hz-18kHz, +0/-1dB
- Maximum Input Signal +11dBu, ≤1%THD+N, 100Hz-20kHz minimum gain settings
- Noise Floor -89dBFS (A-wt.) minimum gain settings
- Dynamic Range 87dB (re 0dBFS, A-wt.) microphone gain setting: -1.1dB
- Headphone Output 16Ω load used for measurements
- I/O 1/8”stereo input T: left channel, R: right channel, S: headphone ground
- Frequency Response 20Hz-18kHz, +0/-3dB
- Maximum Output Power 25mW (re 0dBVS, 22Hz-22kHz BW)
- Noise Floor -95dBU (A-wt.)
- Dynamic Range 93dB (re-2dBU, A-wt.)
- Digital to Analog Volume 0dBFS USB playback = -2dBu headphone out
USB
- I/O USB Type-C (USB2.0) USB C to USB A adapter included
- Bit Depth 16-bit
- Sample Rate 44.1kHz/48kHz
- Power +5VDC, 100mA max
- OS Compatibility macOS, Windows, Linux, iOS, Android
- Weight 19g without USB adapter 25g with USB adapter
- Dimensions 210mm x 24mm x 15.75mm without USB adapter 242mm x 24mm x 15.75mm with USB adapter
IMPORTANT SAFETY INFORMATION
FCC Notice
This device complies with Part 15 of the FCC Rules Class B and RSS-210 of
Industry & Science Canada.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private household in the 28 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For Countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.
Copyright 2021, V1.1
Samson Technologies Corp.
278-B Duffy Ave
Hicksville, New York 11801
www.samsontech.com
