DDPAI mola N3 Car Dash Cam User Guide
- June 12, 2024
- DDPAI
Table of Contents
DDPAI mola N3 Car Dash Cam
Product Information
The product is a Dash Cam with GPS and SR capabilities. The GPS feature
synchronizes the driving trajectory and various GPS-related parameters on the
DDPai APP of a mobile phone, including GPS positioning and GPS track
recording. The SR feature imports the GPS data and sensor data into the video
to generate an exclusive, cool trajectory interface, giving users a better
visual and content sharing experience.
Note: The GPS version of the Dash Cam supports GPS and SR. The normal
version of the Dash Cam doesn’t support GPS and SR.
Package Contents
- 3M Adhesive
- User Guide
- USB Charger
- Mounting bracket
- Power Cable
- Installation Tool
- 1 Dash Cam
Product Overview
- Parking monitoring indicator
- Lens
- Working indicator
- MIC
- Reset button
- Mounting bracket
- Speaker
- Micro USB port
- Lock button
- Micro SD card slot
LED Indicator Instruction
Name | Description |
---|---|
Working properly | Blue light flashes slowly |
Parking monitoring | Red light flashes slowly |
Upgrading | Red and blue lights are always on |
Storage abnormal / working abnormally | Blue and red lights flash quickly |
Installation
- Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion.
- Take out the Dash Cam and bracket from the box, push the lock button on the bracket, and insert the USB Type-C port of the bracket into the USB Type-C port of the Dash Cam to ensure that the bracket fits firmly.
- Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.
- Remove the protective film from the back of the bracket, attach the adhesive side of the bracket on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view.
- Turn on the Dash Cam after installation, you will hear a boot tone, and a blue light flashes slowly.
- Connect the DDPai App, refer to the reference line on the preview interface, and rotate the bracket to adjust the camera angle.
App Instruction
To install DDPAI APP, scan the QR code to download the DDPai APP.
iOS
-
Keep the Dash Cam and mobile phone within 2.5 meters.
-
Launch DDPAI App, tap on Device > Connect new devices.
-
Choose your DDPAI Dash Cam from the network list (For Android system, App will start to search Dash Cam network automatically.
For iOS phone: turn on WLAN from Settings -> WLAN). The Dash Cam’s default SSID (or Wi-Fi name) is DDPAI_mola N3_XXXX. -
Enter the password (the default password is `1234567890′).
-
Enter DDPAI App, wait a few seconds until the preview screen shows.
Android
- Keep the Dash Cam and mobile phone within 2.5 meters.
- Launch DDPAI App, tap on Device > Connect new devices.
- Choose your DDPAI Dash Cam from the network list. The App will start to search Dash Cam network automatically.
- Enter DDPAI App, wait a few seconds until the preview screen shows.
To preview recordings, open the DDPAI App and select Device > Entering tab. You can rotate your smartphone or press expand the preview screen to landscape mode. Tap and left/right drag the timeline bar at the screen bottom to create the starting point of the recording you wish to preview. Then tap on the thumbnail when you have made your selection, or wait for 5 seconds for buffering. Now you can watch the recorded video.
GPS AND SR
- The GPS can synchronize the driving trajectory and various GPS-related parameters on the DDPai APP of a mobile phone, including GPS positioning and GPS track recording.
- The SR can import the GPS data and sensor data into the video to generate an exclusive, cool trajectory interface, giving you a better visual and content sharing experience.
NOTE: The GPS version of the Dash Cam supports GPS and SR. The normal version of the Dash Cam doesn’t support GPS and SR.
SPECIFICATIONS
- Product Name: Dash Cam
- Model: mola N3
- Input: 5V 2A
- Size: 993628mm
- Storage: Class 10 TF card up to 128 GB,loop recording
- GPS: GPS module built-in(optional)
PACKAGE CONTENTS
PRODUCT OVERVIEW
1 Parking monitoring indicator | 6 Mounting bracket |
---|---|
2 Lens | 7 Speaker |
3 Working indicator | 8 Micro USB port |
4 MIC | 9 Lock button |
5 Reset button | 10 Micro SD card slot |
LED INDICATOR INSTRUCTION
Name | Description |
---|---|
working properly | Blue light flashs slowly |
Parking monitoring | Red light flashes slowly |
Upgrading | Red and blue lights are always on |
Storage abnormal / working abnormally |
Blue and red lights flash quickly
INSTALLATION
-
Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion.
-
Take out the Dash Cam and bracket from the box, push the lock button on the bracket, and insert the USB Type-C port of the bracket into the USB Type-C port of the Dash Cam to ensure that the bracket fits firmly.
-
Remove the protective film from the back of the bracket, attach the adhesive side of the bracket on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view. As shown below.
-
Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.
-
Turn on the Dash Cam after installation, you will hear a boot tone, and a blue light flashes slowly.
-
Connect the DDPAI App, refer to the reference line on the preview interface, and rotate the bracket to adjust the camera angle.
APP INSTRUCTION
Install DDPAI APP
Scan the QR code to download the “DDPai” APP.
Pair Smart Phone to Dash Cam
-
Keep the Dash Cam and mobile phone within 2.5meters.
-
Launch DDPAI App, tap on “Device > Connect new devices”.
-
Choose your DDPAI Dash Cam from the network
list(For Android system, App will start to search Dash Cam network automatically. For iOS phone: turn on WLAN from “Settings ->WLAN”). The Dash Cam’s default SSID (or Wi-Fi name) is DDPAI_mola N3_XXXX. -
Enter the password (the default password is ‘1234567890’).
-
Enter DDPAI App, wait a few seconds until the preview screen show.
Preview
- Open the DDPAI App, and add your Dash Cam.
- Select “Device > Entering” tab, this will bring you to the preview page.
Rotate your smart phone or press expand icon, turn the preview screen to
landscape mode.
Playback
Tap and left/right drag timeline bar at the screen bottom to create the
starting point of the recording you wish to preview, then tap on thumbnail
when you have made your selection, or wait for 5 sec for buffering, now you
can watch the history recording.
Download Video Files
- Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to download, then tap on thumbnail when you have made your selection, or wait for 5 sec for buffering, to enter the download start screen.
- Tap on from preview screen to enter the download interface.
- After the video has finished downloading, click “Complete”.
CONTACT
- en.ddpai.com
- feedback@ddpai.com
- DDPAI Technology Co., Ltd
- Floor 12, Yihua finance building, Software park, Yuehai Sub district, Nanshan district, Shenzhen
For more information and FAQs, Please scan the QR code:
Documents / Resources
|
DDPAI mola N3 Car Dash
Cam
[pdf] User Guide
mola N3, mola N3 Car Dash Cam, Car Dash Cam, Dash Cam
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>