BYTECH BY-LT-TY-104-AC Desk Riser with Wireless Charging Pad User Manual
- June 13, 2024
- Bytech
Table of Contents
BYTECH BY-LT-TY-104-AC Desk Riser with Wireless Charging Pad
Product Information
This device is designed to comply with part 15 of the FCC Rules, ensuring that it meets the necessary regulations for electromagnetic interference. It is also compliant with FCC radiation exposure limits for use in an uncontrolled environment.
Product Usage Instructions
When using this device, please follow these guidelines:
- Ensure that the device does not cause any harmful interference to other devices.
- The device should accept any interference it receives, even if it affects its operation.
- For your safety, maintain a minimum distance of 20cm between the radiator of the device and your body during installation and operation.
By adhering to these instructions, you can ensure proper usage of the device
while minimizing potential interference and maintaining a safe distance from
the radiator.
Thank you for purchasing the Multifunctional Desk Riser. Please read all the
directions before operating. This Multifunction Desk Riser has everything you
need to organize your workspace. It includes one Wireless Charging Pad, two
Pencil Holders, and a built-in USB power hub
INCLUDES
- 1 (One) DESK RISER 22.8in. x 7.9in. x 2.9in. (57.9cm x 20cm x 7.4cm)
- 1 (One) USB A to USB A Cable: 39.4in (100cm)
- 1 (One) USB A to USB C Cable: 39.4in (100cm)
FEATURES
- Organize your workspace
- Includes two built-in pencil holders
- Built-in Q1 compatible wireless charging pad
- 2 power cables included
- Built-in USB power hub
- Reinforced weight support
- Compatible with most smartphones with Qi Wireless
Charging capability, such as: Apple® iPhone® 8 Series/X-Series/11 Series/ 12 Series/ 13 Series/ 14 Series/SE; Samsung® Galaxy® S6-S23 Series, Note® 8 & Later/Galaxy® Fold/Galaxy® Flip; LG® G2-G8 Series/Thin® Series; Google® Pixel® 3-7 Series and many more (check with your smartphone manufacturer.)
SPECIFICATIONS
USB PORTS
- INPUT: 5V 1A
- OUTPUT: USB 2.0
WIRELESS CHARGER
- INPUT : 5V 1A
- OUTPUT: 5V 1A total
- POWER: 5W
Connect USB-A tip of this cable to a USB-A port of your computer or laptop. Then connect another USB-A tip to USB-A INPUT port on the Desk Riser,so that 3 data transmission (OUTPUT) ports can be used, Use this cable to expand yourlaptop/computer data connectivity, turning one USB port into a hub that supports two USB-A ports + one USB-C port.
Connect the USB-A tip of this cable to a USB power source (power adaptor or computer). Then connect the USB-C tip to the USB-C INPUT port on the Desk Riser, so that wireless charging can be used.
WIRELESS CHARGING
Simply place your phone in the charging area. It will automatically begin to
charge your phone in seconds.
Notice: If your phone is properly placed in the wireless charging area
but still is not charging, please reboot your phone.
FCC
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.
WARRANTY- 12 MONTH
Please visit our website Bytechintl.com/warranty.
- @2023 BYTECH NY INC.
- BYTECH™ is a registered trademark of Bytech NY INC.
- iPhone® is a registered trademark of Apple, Inc.
- Galaxy S® is a registered trademark of Samsung Electronics Co, Ltd.
- Pixel® is a registered trademark of Google, Inc.
- Thin® is a registered trademark of LG, Inc.
- Bytech NY Inc. has no affiliation with Apple, Inc., Samsung Electronics Co, Ltd., Google, Inc., Huawei Technologies Co., Ltd., or LG, Inc.
- All Trademarks and copyrights are the property of the respective companies.
- Photos are for illustration purposes only.
- Laptop not included
- Smartphones are not included.
FCC
FCC ID : 2AHN6-LTTY104
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>