Treevol Furniture ALW 9910 Pantry Cabinet Clinton Installation Guide
- September 12, 2024
- Treevol Furniture
Table of Contents
Treevol Furniture ALW 9910 Pantry Cabinet Clinton
Specifications:
- Product: Pantry Cabinet
- Material: Wood
Product Usage Instructions
What You Will Need:
Hi! My name is Armando, and I’ll be with you while you assemble this
cabinet.
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (cardboard or rug)
- Optional: Electric screwdriver
Assembly Steps:
Where Should You Start?
Check the panel and hardware content. Ensure the quantity is correct and
everything is in good shape.
What’s in the Hardware Bag?
Contents include:
- Wood dowel x40
- Hinge + screws x6
- Spreading bolt x12
- Minifix cam x12
- Cover caps x14
- Handle + screws x2
- Nail-on glide x6
- H Profile x1
- Wall anchor + screw x2
- Nail x38
How Do the Dowels and Minifix System Work?
Wood Dowels:
- Put in the dowel inside the indicated hole.
- Gently hit until fully inside to adjust the joint.
Minifix System:
- Insert the Minifix cam with the arrow pointing towards the drilling on the panel’s edge.
- Secure with the spreading bolt.
[Include images or diagrams if available in the manual]
Let’s Start Assembling!
[Follow the step-by-step assembly guide provided in the manual.
Ensure proper alignment and secure all connections.]
Weight Capacity Information:
The cabinet can resist [insert weight capacity here]. Place heaviest items
in the lowest drawers for stability.
Last Recommendations for Care:
[Include any specific care instructions provided in the manual to maintain
the cabinet’s quality and longevity.]
FAQ:
-
Q: Is it necessary to use an electric screwdriver for assembly?
A: An electric screwdriver is not necessary but can make the assembly process easier and faster. -
Q: Can children climb or hang on the cabinet?
A: To reduce the risk of tip-over, NEVER allow children to stand, climb, or hang on drawers, doors, or shelves of the cabinet.
Secure it to the wall using an anti-tip device. -
Q: What should I do if any hardware is missing from the bag?
A: Contact customer support immediately for assistance in obtaining any missing hardware needed for assembly.
WARNING
Children have died from furniture tip over. To reduce the risk of tip over:
- ALWAYS secure this furniture to the wall using an anti-tip device.
- NEVER allow children to stand, climb, or hang on drawers, doors or shelves.
- Do not defeat or remove the drawer interlock system.
- Place heaviest items in the lowest drawers.
- NEVER put a TV on this furniture.
To ensure the safety of those using this cabinet, it is crucial to properly secure it to the wall using a tip-over device. This product includes the necessary items for fixing the furniture to the wall. However, it is important to note that incorrect installation or failure to use the tip-over device can result in serious injury or even death. For this reason, we highly recommend that a professional installer handle the installation of the cabinet to the wall.
What will you need?
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this cabinet.
Please make sure that the quantity of each one is correct, and that everything
is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
| A – x1 | B – x1 | C – x1 | D – x1 |
|---|---|---|---|
| E – x1 | F – x4 | G – x1 | H – x2 |
| I – x1 | J – x2 | K – x2 |
What’s in the hardware bag?
How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
- Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
- When joining two panels together, don’t forget to gently hit the panels to adjust the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
-
This is a Minifix cam.
It has a little arrow on its upper surface. -
You should insert these cams with the little arrow pointing towards the drilling on the panel’s edge (shown on the left).
-
This is a spreading bolt.
You should put it with the black plastic part facing down. -
After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.
Assembly Instructions
very carefully!
Fix your cabinet to the wall
On the wall, measure and mark the points shown below.
Drill on the markings with a 5/16″ drill bit.
Insert the wall anchors inside the drillings.
Place the cabinet and secure it with the screws.
very carefully!
Assembling and setting up the door
Hinge adjustment
After adjusting all the Minifix cams, cover them up with the cover caps.
After finishing the assembly, lift off al the adhesive letters.
How much weight does my cabinet resist?
*weight in pounds
Congratulations!
It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone.
Be specially careful with the kids.
Taking care of your cabinet:
- Do not paint the cabinet.
- The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
- Clean the metallic hardware with a dry cloth.
- DO NOT overload the cabinet (see suggested loads)
- Do not hit or hammer the cabinet (only when indicated here).
- Clean it with thinner, a soft soap solution or simply a damp cloth.
- Don’t drag the cabinet, lift it up with other people.
- Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
WARRANTY POLICY
Furniture has a 1 year warranty coverage in wooden parts and 1 year warranty coverage in hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet. Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet. This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase.
These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts. This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc. Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state). To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company. There are no other warranties applicable to this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>