eta 2267 Azurit Steam Mop and Handheld Cleaner Instruction Manual

June 5, 2024
ETA

2267 Azurit Steam Mop and Handheld Cleaner
**Instruction Manual

**

Steam mop and handheld cleaner 2 in 1
eta 2267
AZURE

INSTRUCTIONS FOR USE

Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including the warranty, the receipt, and, if possible, the box with the internal packing.

SAFETY WARNING

  • Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
  • ­Check whether the data on the type label corresponds with the voltage in your socket. The power cord plug may only be connected to the electrical socket complying with the applicable standards.
  • ­ This appliance may only be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
  • Prevent children from reaching the appliance if connected to the mains or while cooling down.
  • Cleaning and user maintenance shall not be made by children. Children younger than 8 years must be kept out of reach of the appliance and its power cord.
  • Never use the appliance if the power cord or plug is damaged, if it operates incorrectly, fell on the ground and is damaged, fell into the water, is apparently damaged or is leaking.
  • In such cases bring the appliance to the specialised repair shop to verify its safety and correct functionality.
  •  If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician, or a similarly qualified person so as to prevent dangerous situations.
  • Never aim the steam flow at persons, body parts, animals, plants or any appliances containing electrical components (electrical devices, wall outlets, cables, furnace interiors, etc.) ­ electric shock is imminent in such cases. Only aim the steam flow at the surface you are cleaning.
  • After use and before maintenance, the appliance must be disconnected from the mains by unplugging it from the wall socket.
  • Never have the appliance connected to the wall socket unattended! ­
  • NOTE: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
  • The appliance must not be immersed in water or other liquids (not even partially)! If the appliance falls in water, do not take it from the water! First, disconnect the power cord plug from the electrical socket, and then take out the appliance from the water. In such cases, bring the appliance to a specialized service center to verify its safety and proper operability.
  • ATTENTION: Do not use this heater in series with an external timer, remote controller, or any other device that switches on the appliance automatically, since a fire risk exists when the heater is accidentally covered or displaced at the moment it switches on.
  • The product is intended for home use. It is not intended for commercial use! ­
  • This appliance is not intended for outdoor use. ­
  • Do not plug the power cord in the electrical socket and do not unplug it with wet hands or by pulling the power cord! Do not handle the appliance with wet hands. ­
  • The appliance must not be used in a damp or wet environment and in any environment with the danger of fire or explosion (premises where chemicals, fuels, oils, gases, paints, and other flammable or volatile materials are stored). ­
  • After use, disconnect the appliance from the mains and let it cool down. Before long-term storage, pour out the remaining water. ­
  • Never connect the appliance to the mains when the tank is empty! Once steam production stops, the internal tank is empty and must be replenished following the steps described below. ­
  • Only fill the water tank after unplugging the power cord from wall socket. ­
  • Only fill the water tank with clear water (if the water in your home is too hard, you can mix it 1:1 with distilled water, or use demineralized water).
  • Do not use any chemical agents and other liquids, such as rust removers, aromatic substances, alcohol, various detergents, etc.

ATTENTION ­ Steam! Risk of scalding! This appliance produces hot steam. This means that not only the cleaning adaptors but also the surfaces and items being cleaned are very hot! Therefore NEVER touch the appliance’s hot surface and the spots being cleaned using the appliance, and before exchanging the adaptors and maintenance, let everything cool down first.

  • Make sure before use that all items, surfaces and fabrics to be cleaned are resistant to hot steam temperature. Do not clean for example wooden surfaces, leather, waxed furniture or floor, or fine clothes, such as silk or velvet, without first reading the manufacturer’s instruction manual and making a test on a small, less visible part of the item to be cleaned.
  • ­ Do not aim the steam flow at toxic substances, acids, thinners, detergents or aggressive substances. Handling and removing such substances and any similar ones may only be made in accordance with the instruction provided by the manufacturers.
  •  Do not aim the steam flow at explosive powders or liquids, carbohydrates, open fire or extremely hot items.
  • ­Do does not use the appliance to clean pressure vessels, containers filled with liquids or containers with unknown content as there is a potential risk of their tear or explosion.
  • Do not clean a single spot for too long. Otherwise, the surface/item cleaned too long may incur damage.
  • Attention! After releasing the steam trigger, a small amount of steam is discharged from the nozzle for several seconds ­ risk of scalding.
  • Do not insert any items in the openings of the appliance or accessories ­ openings must not be blocked by anything (for example by clots, dust, hairs, etc.).
  • Keep a distance between the openings and your hair, loose clothes, and any body parts. ­
  • Never aim the detergent flowing from the steam nozzle at persons, animals, plants or any appliances containing electrical components (for example inside furnaces, driers, etc.).
  • Never use the appliance without properly fixed and filled water tank! ­
  • Only move the appliance holding its handle. ­
  • If steam is spontaneously discharged from the appliance, switch it off, disconnect it from the mains, and let it properly cool down.
  • Contact the nearest authorized service center and stop using the appliance. ­
  • In the case of unexpected interruption of electric power supply, disconnect the appliance from the mains by unplugging the power cord plug from the wall socket. ­
  • The steam cleaner must be stored at the temperature of at least 0 °C, or acclimatized to the room temperature before use. ­
  • When the floor is made of parts or contains wooden parts, it has to be completely sealed against water leaks. The cleaned surface has to be resistant to spilled water. ­
  • The Manufacturer is not liable for any damages caused by water leaking into the floor and shall not participate in any compensation for such damages. ­
  • Only use original components designed for this type. ­
  • Check the condition of the power cord of the appliance regularly. ­
  • Never put the power cord on hot surfaces and never let it hang over the table edge or worktop edge.
  • If the cord is caught or pulled, e.g. by children, the appliance may overturn and fall down, causing a serious injury! ­ If you need to use an extension cord for justified reasons, it must be undamaged and comply with the applicable standards. ­
  • Only use this appliance for the purpose it was designed for, as specified in this manual. Never use the appliance for any other purpose. ­
  • WARNING: There is a risk of injury when the appliance is not used correctly (not in accordance with the manual). ­
  • All texts in foreign languages and pictures are shown on the packaging or the product itself are translated and explained at the end of this language mutation. ­
  • The manufacturer assumes no responsibility for any damage caused by improper handling of the appliance and its accessories (e.g. electric shock, burns, fire), and the appliance guarantee will become void if any of the aforementioned safety instructions are not observed.

DESCRIPTION OF THE APPLIANCE (Fig. 1, 2)

A ­ Steam unit
A1 ­ adaptor lock button water filter
A2 ­ adaptor lock button Water tank
A3 ­ Steam release button
A4 ­ Water tank
A5 ­ Water filter
A6 ­ Steam nozzle
A7 ­ Handle
A8 ­ Water tank stopper
A9 ­ Power cord
A10 ­ Control light
B ­ Extension adapter
B1 ­ Steam unit lock button
B2 ­ Handle lock buttons
C ­ Extension handle
C1 ­ Steam discharge button
C2 ­ Cord reel holder
D ­ Accessories
D1 ­ Flat mini-scraper
D2 ­ Flexible extension hose
D3 ­ Nylon round brush
D4 ­ Brass round brush
D5 ­ Grout brush
D6 ­ Angled steam nozzle
D7 ­ Mopping textile (sleeve)
D8 ­ Large round brush
D9 ­ Wide squeegee for windows and flat surfaces
E ­ Mopping / Floor nozzle with an integrated dispenser with brush

E1 ­ Floor nozzle lock button
E2 ­ Water tank
E3 ­ Water tank stopper
E4 ­ Water discharge pedal
F ­. Mopping textile (sleeve)
G. ­Carpet cleaning adapter

INSTRUCTIONS FOR USE

Remove all packaging materials and take out the appliance with accessories. Remove all adhesive foils, stickers or papers. Assemble the appliance and relevant accessories according to the intended activity.

A) STEAM MOP AND HANDHELD CLEANER (Fig. 3, 4, 5)
If you are going to use the appliance particularly for mopping and cleaning floors, assemble it as follows: connect steam unit A , extension adapter, and mopping/floor nozzle E to the extension handle C. When disassembling the set, first release the lock mechanisms (steam unit A by button B1, mopping/floor nozzle E by button E1 ), and only then dismount the individual parts of the mopping adapter. If the above-described set is used, mopping nozzle E may add with the mopping textile F put on (surfaces designed for simultaneous vacuuming and mopping parquets and other hard floors e.g. floating floors, tiles, linoleum, etc.). Or may added with the mopping textile F put on and the carpet cleaning adapter G put on remove only be used when refreshing carpets.
B) HANDHELD STEAM CLEANER
If you are going to use the appliance as a handheld steam cleaner, remove the steam unit A from the extension adapter B by pressing the lock button B1 (Fig. 3).
Accessories assembly options (Fig. 11)
Steam cleaner may be used in many assembly variants, keeping the following rules:
­ Accessories D1, D3, D4, D5, D6, D8, D9 can be attached to the extension hose D2 or the steam nozzle A6.
­Extension hose D2 may be used:
a) Separately for steam nozzle A6
b)
With the accessories D1, D3, D4, D5, D6, D8, D9 attached ­ Wide squeegee for windows D9 may be used:
a) Separately for steam nozzle A6
b) With the attached accessories D7 for steam nozzle A6
c) Separately, put on the extension hose D2
d) With the accessories D7 attached to the extension hose D2
­The Mopping / Floor nozzle E may be used:
a) With the accessories F attached
b) With the accessories F, and G attached
How to assemble the accessories

  • All adaptors D1, D3, D4, D5, D6, D8, D9 can be mounted on the steam nozzle A6 (or on hose D2 ) by putting it on and securing it by clockwise rotation. Flexible extension hose D2 can be mounted on the steam nozzle A6 by putting it on (see Fig. 10).
  •  Fix the textile sleeve D7 to the Wide squeegee D9 be putting it on.
  • Soak the mopping textile F cloth with water and wring it with your hands. On the underside, there are surfaces with Velcro, which are designed for attaching the cloth to nozzle E. Apply a reverse procedure to remove.

Attention ­
Before using the appliance, check all the components if they are properly connected and assembled! Make sure that the contact surfaces and sealing elements are clean and undamaged. ­ As this appliance uses water to clean, the floor may remain wet and slippery for a while.
Water filling (Fig. 6, 7)
Water tank A4
When filling water, make sure that the appliance is disconnected from the mains. Turning the lock adaptor A2 , remove the container A4 from the steam unit A and pull it out. Remove the water tank plug A8 from the tank. Fill the tank with water or demineralised water. Do not exceed the maximum volume of water (i.e. 380 ml). Put the plug in place. Install the assembled tank on the steam unit A in a reverse way. Ensure that the contact surface and the sealing elements are in order.
Water tank E2
Press the lock button, remove the water tank from the mopping nozzle E and pull it out. Remove the water tank plug E3 from the tank. Pour clean water (hot or cold) into a water tank You can also add foamless detergent suitable for cleaning hard floors (i.e. 130 ml). Put the plug in place in a reverse way. Install the assembled tank on the mopping nozzle in a reverse way, end- to-end, which is accompanied by a characteristic sound (clicking).
Attention ­
Never use the appliance without the water filter A5 properly fixed. ­ The steel ball of water tank A4 at the end of the hose must permanently and freely
move below the water level. If it gets stuck, free it by shaking the cleaner.

STEAM CLEANER USE

First, choose the appliance assembly variant, and then add/remove the respective components and accessories of the appliance as needed. Unwind the power cord A9 from the holder C2. Plug the power cord in a wall socket the appliance on which will be indicated by turning on the operation light indicator (lit in red A10). The appliance is ready for cleaning in about 25 seconds (lit in green), because the appliance does not need to heat up the entire water tank, but it only pumps and heats a small volume of water.
To activate steam (after 30 seconds at the earliest, the operation light indicator lit in green!), it is necessary to press the steam release button A3 (if the appliance is used as a handheld steam cleaner), or the steam release button C1 (if the appliance is used as a steam mop) fig. 9. The built-in pump will gradually start pumping water from tank A4, and the appliance will start producing hot steam.
If you see a considerable decrease in steam production and low water level in the water tank during use, water must be replenished (see “Water filling”).
Note ­

  • After the first use or after interrupting the cleaning for several minutes, direct the steam flow into the container to remove excess water from the accessories (such water is produced by the steam condensation). When steam is produced, always aim the steam flow down at the floor.

Note ­

  • In the case of a long operation time, hot water may squirt from the appliance along with steam. In such case, interrupt your work, and continue after a while. ­
  • When the cleaner is used for a long time, the heating element in the steam production unit will start cycling, and the steam flow released from the nozzle is unstable. This is normal and there is no reason for filing a complaint. ­
  • When mopping/cleaning sensitive surfaces (such as parquets, glass or textiles), set the steam intensity to a lower level, and only increase it if resistant stains or dirt are to be cleaned. Do not activate steam for too long when mopping, because the mopped surface could become soaked too much. ­
  • We recommend vacuuming the dry surface (for example upholstery, floor) before cleaning. ­
  • It is recommended to press button C1 when moving forward; do not add steam when moving backward. Please, avoid continuously holding down button C1 which would lead to continuous application of steam (fig. 13). Such water amount is unnecessary and the water container would get emptied fast. ­
  • Press the foot pedal E4 to the ON position to engage the Solution Tank. Press the foot pedal to the OFF position to disengage (fig. 8).

Examples of the use of accessories (fig. 12, 13)
This appliance very effectively disinfects various surfaces and materials, removes dirt, dissolves grease, wipes grime, etc. A wide assortment of accessories also allows for cleaning floors, carpets, bathrooms, sinks, toilettes, radiators, grills, crevices, upholstery, car interiors, and wheels, etc.
Flat mini-scraper (D1) ­
To remove hardened and resistant grime from flat surfaces; in ovens or for defrosting freezers.
Flexible extension hose (D2) ­
Thanks to its sufficient length and high flexibility, cleaning of hard-to- reach spots is possible and is also used as the basic adapter to mount accessories D1, D3, D4, D5, D6, D8, D9.
Nylon round brush (D3) ­
To remove grime from small surfaces, such as grouts in baths/ showers, cooktops, sunblinds, grouts between tiles, etc.
Brass round brush (D4) ­
To clean very tough dirt from small and very resistant surfaces (for example grills and racks); unsuitable for cleaning sensitive surfaces.
Grout brush (D5) ­
For effective cleaning of various points and grooves.
Angled steam nozzle (D6) ­
To clean hard-to-reach corners and openings, such as toilette bowls, wash- basins, etc.
Mopping textile (D7) ­
To remove grime from small surfaces, such as grouts in showers, cooktops, tiles, glass, etc.
Large round brush (D8) ­
To remove grime from large surfaces
Squeegee for windows and flat surfaces (B9)
­ Particularly for cleaning windows and various non-glass surfaces.
Mopping/Floor nozzle (E)
­ Is to be used to clean smooth/hard flooring, and parquets and can be used to clean paving.
Mopping textile (F) ­
Textile is recommended especially is suitable for cleaning hard floors, and parquets and can be used to clean paving.
Carpet cleaning adapter (G) ­
To remove only be used when refreshing carpets.
After finishing cleaning

  1. Disconnect the power cord from the mains, operation light indicator will turn off.
  2. Let the appliance and accessories cool down.
  3. Pour out the excess water, and let the water tank A4 dry out.
  4. Remove the accessories/textiles, and store the appliance.

Attention

  • Do not use the cleaner without the Mopping textile (sleeve) F attached to the Mopping Floor nozzle E. ­
  • Do not use the carpet cleaning adapter G for cleaning hard floor types. ­
  • To prevent the solution from leaking ensure the foot pedal E4 is in the OFF position when the product is not in use.

 MAINTENANCE (Fig. 15)

Turn off the appliance before any maintenance, unplug the fork of the power cord from the power supply socket and let it cool down! If you are going not to use the appliance for a long time, let it dry, including the accessories. Do not use rough and aggressive detergents! Carry out surface maintenance only (wipe off dust etc.). For removing old dust or other impurities, use a soft damp cloth. Mopping textiles may be cleaned by manual rinsing in clear water, or you can use a wash machine (max. 40 °C), do not use bleach or fabric softener.
Then let the mop/textile completely dry out. Water filter A5 protects the appliance from incrustation. Depending on the use frequency and the water hardness level, the filter becomes clogged after some time, and its effectiveness will decrease. Therefore the filter status must be regularly checked. When the grains turn dark, it is advisable to replace the filter (ETA order code is ETA226700120). The filter lifetime is about 3-6 months, depending on the use frequency and the water hardness level. If the water filter A5 must be replaced, pull it out from the steam cleaner body (see Fig. 14). Ensure that the contact surface and the sealing elements are in order.
If the power cord is soiled, wipe it with a wet cloth. Store the cooled down and dry appliance at a safe and dry place, out of reach of children and incapacitated persons. Do not put the assembled assembled mop steam cleaner on an uneven surface! The assembled mop steam cleaner must be placed on a flat surface where there is no danger of knocking over. In this position, the mop nozzle will automatically lock (a click will be heard).
It is recommended to clean the water tank occasionally (approximately after 10 ­ 15 fillings). You can remove the scale by regular rinsing. Fill the tank with water and shake it.
Turn the appliance over and pour water out of the tank. You can also use decalcification detergents, that are suitable for aluminum surfaces. Do not use any aggressive detergents (vinegar, citric acid, etc)!
Optional accessories order numbers: D1, D3, D4, D5, D6 ­ ETA226700040, D2 ­ ETA226700050, D7 ­ ETA226700020, D8 ­ ETA226700030, D9 ­ ETA226700010, E ­ ETA226700060, F ­ ETA226700070, G ­ ETA226700080.

ENVIRONMENT

Printed signs of materials used for manufacture, packing, components, and accessories, as well as their recycling, are on all the pieces if their dimensions enable it. The symbols on the product or in the accompanying documentation mean that the used electric or electronic products must not be disposed of together with municipal wastes. Please, hand them over to the collection points designed for their correct disposal, where they will be accepted free of charge. By correct disposal of this product, you can help to preserve valuable natural resources and help to prevent possible negative impacts to the environment and to human health, which could be the results of incorrect waste disposal. For further details ask the municipal authorities or the nearest collecting point. Penalties can be charged for incorrect disposal of such wastes, according to national regulations. If the appliance is to be put out of operation definitely, we recommend cutting off the feeder cable, to disable its use.
Expert service must do the large maintenance or to intervene in inside parts of the appliance! Non-observance of the instructions of the manufacturer cancels the right for guarantee repair!

TECHNICAL DATA

Voltage (V)………………………shown on the type label of the appliance
Absorbed power (W) …………………shown on the type label of the appliance
Weight (kg) approximately
Protection class of the appliance
Approx. dimensions (LxDxH) (mm)
– steam unit ……………….170 x 122 x 353
– assembled …………………….1115 x 320 x 24
Water-resistance ………………. IPX4

The manufacturer reserves the right to change the technical specifications and accessories for the respective models.
HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS. UPOTZOOARVNOEIDNIDEA: NHGOERRÚCOIFPSOUVFRFOCHCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAYPENS. THIS BAG IS NOT A TOY.

The symbol indicates a WARNING.
WARNING: HOT SURFACE © DATE 4/3/2021

Documents / Resources

| eta 2267 Azurit Steam Mop and Handheld Cleaner [pdf] Instruction Manual
2267 Azurit Steam Mop and Handheld Cleaner, 2267, Azurit, Steam Mop and Handheld Cleaner
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals