Origin21 KXF1303AX-01 3 Light Vanity Bar Instruction Manual
- June 3, 2024
- Origin21
Table of Contents
KXF1303AX-01 3 Light Vanity Bar
Instruction Manual
KXF1303AX-01 3 Light Vanity Bar
ORIGIN 21 and logo design are trademarks or registered trademarks of
LF,LLC. All rights reserved.
Todos los derechos reservados.
BARRA
PARA
TOCADOR DE 3 LUCES
MODEL#KXF1303AX-01
Thank you for purchasing this origin21 product. We’ve created these easy-to-
follow instructions to ensure you spend your time enjoying the product instead
of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
888-251-1026, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes.
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulb will not light. | 1. Bulb is burned out. | |
| 2. Faulty wire connection. | 1. Replace light bulb. |
2. Check wiring.
CARE AND MAINTENANCE
- Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Hardware shown actual size
INSTALLATION OVERVIEW
Turn off the power and remove existing fixture.
Attach A to outlet box using AA. Temporarily place D through B determine amount of adjustment necessary B.
INSTALLATION OVERVIEW
Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
Attach BB to connections with electrical tape (not included).
Unscrew the socket rings F from sockets on fixture body D. Attach glass shades
E over the sockets.Tighten socket rings F with socket ring fastener CC as
needed. Note: Do not overtighten. 
Install light bulbs (not included). Use 60-watt max. standard-base incandescent bulbs or CFL/LED equivalents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>