Origin21 KYW3001LX-02 LED Flush Mount Ceiling Fixture Instruction Manual

Origin21 KYW3001LX-02 LED Flush Mount Ceiling Fixture

Product Information

• Product Name: LED Flushmount Ceiling Fixture
• Model Number: #KYW3001LX-02
• Trademark: ORIGIN 21 and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
• Manufacturer: Made in China
• Estimated Assembly Time: 15-20 minutes
• Tools Required (Not Included): None specified

Package Contents:

• An x1 (preassembled)
• B x1 (preassembled)
• C x1
• D x1
• E x1
• F x1 (preassembled)

Product Usage Instructions

1. Turn off the power and remove the existing fixture.
2. Attach mounting strip A to the outlet box (not included) using outlet box screws AA.
3. Feed wires and twist the stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
4. Attach BB to connections with electrical tape (not included).
5. Place canopy E onto mounting screw B and secure with cap nut D.

• If you encounter any issues or have any questions, please refer to the user manual provided on Lowes.com or contact our customer service department at 888-251-1026.
• Please note that this product is trademarked by ORIGIN 21 and is manufactured in China.
• Thank you for purchasing this Origin 21 product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit
• Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
• If you have any questions or problems, please call our customer service department at 888-251-1026, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com.

TROUBLESHOOTING

PROBLEM/POSSIBLE CAUSE/CORRECTIVE ACTION

• LED chips will not light
• Faulty wire connection.
• Faulty switch
• Check wiring
• Test or replace the switch

CARE AND MAINTENANCE

• Wipe with a damp cloth or use window cleaner. Do not use abrasive cleansers.
• Bulb Information: 16-watt integrated LED included; do not attempt to replace the LEDs

WARRANTY

• The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years limited from the date of purchase

FEELING CONFIDENT? START YOUR NEXT PROJECT

• Visit lowes.com for more information

FCC

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Importer Name: Lowe’s Home Centers LLC
Importer Address: 1000 Lowe’s Blvd. Mooresville, NC 28117
Telephone number: 888-251-1026
Product Name: LED Flushmount Ceiling Fixture
Model No.: KYW3001LX-02

SAFETY INFORMATION

• Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts
• Assistance may be required to support the fixture during installation

CAUTION

• Connect the fixture to supply wires rated for at least 194˚F
• Workable for dimming circuits.
• Use only the supplied LED driver to power the fixture.
• DO NOT touch the LED model
• The minimum starting temperature for the lamp is -0˚F.

PREPARATION

• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
• If any part is missing or damaged, do not attempt to assemble the product.
• Estimated Assembly Time: 15-20 minutes.

TOOLS REQUIRED

(NOT INCLUDED)

PACKAGE CONTENTS

HARDWARE CONTENTS

Note: The hardware has shown the actual size

INSTALLATION OVERVIEW

• Turn off the power and remove the existing fixture.
• Attach mounting strip A to outlet box (not included) using outlet box screws AA.
• Temporarily place E through B to determine the amount of adjustment necessary for B.
• Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
• Attach BB to connections with electrical tape (not included).
• Place canopy E onto mounting screw B and secure with cap nut D
• Twist shade F onto ceiling plate E until it is firmly secured.
• The assembly is complete. Turn the power back on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>