Origin21 LFL8306AX-01 6 Light Linear Chandelier Instruction Manual
- June 15, 2024
- Origin21
Table of Contents
**Origin21 LFL8306AX-01 6 Light Linear Chandelier Instruction Manual
**
Thank you for purchasing this origin21 product. We’ve created these easy-to-
follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
888-251-1026, 8 a.m. – 8 p.m.,
EST, Monday – Sunday. You could also contact us at
[email protected].
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit : lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
(preassembled)
HARDWARE CONTENTS
Note: Hardware shown actual size
INSTALLATION OVERVIEW
**Turn off the power and remove existing fixture.
**Unscrew the cap nuts C from mounting screws B. Attach A to outlet box
using AA
****Temporarily place D through B to determine amount of adjustment necessary for B.
Pull cord taut, then attach rod assembly together.
Note: To ensure proper assembly, make sure to route the wires through the
ends of the rods with the threaded nipple first.
Unscrew the K/D rings F from chain E. Adjust chain E to desired length. Spread the chain link using standard pliers (not included) and screw driver (not included) and twist chain link in opposite direction and remove the extra chain lengths.
Feed wires. Twist stripped ends of the white, ribbed or tinned wire
without writing from the fixture evenly against the white wire from the outlet
box. Connect the black, smooth or un-tinned wire with writing from the fixture
to the black wire from the outlet box in the same manner. Snip ends.
Attach copper wire to ground wire.
****Attach BB to connections with electrical tape (not included).
****Lift D up over B, securing in place with previously removed C.
****Unscrew socket rings M from sockets on fixture body K.
****Attach glass shades L over the sockets. Secure with socket rings M.
Install light bulbs (not included). Use 60-watt max. standard-base incandescent bulbs or CFL/LED equivalents.
****Assembly is complete. Turn power back on.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE |
|---|---|
| Bulb will not light. |
- Bulb is burned
- Faulty wire connection.
CARE AND MAINTENANCE
- Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.