Origin21 KXF1303AX-01, KXF1303AX-01 BK 3 Light Vinity Bar Installation Guide
- July 8, 2024
- Origin21
Table of Contents
Origin21 KXF1303AX-01, KXF1303AX-01 BK 3 Light Vinity Bar
Thank you for purchasing this ORIGIN 21 product. We’ve created these easy-to- follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulb will not light. | 1. Bulb is burned out. | |
| 2. Faulty wire connection. | 1. Replace light bulb. |
2. Check wiring.
CARE AND MAINTENANCE
- Shut off main power before cleaning light with damp cloth or window cleaner.
- Do not use abrasive cleansers.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes.
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT?
START YOUR NEXT PROJECT
- Visit lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION:
- Connect fixture to supply wires rated for at least 167°F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
QUICK REFERENCE GUIDE
PACKAGE CONTENTS
HARDWARE CONTENTS
Note : Hardware shown actual size.
INSTALLATION OVERVIEW
Turn off the power and remove existing fixture.
-
Attach (A) to outlet box using (AA).
-
Temporarily place (D) through (B).
-
Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
-
Attach (BB) to connections with electrical tape (not included).
-
- Unscrew the socket rings (F) from sockets on fixture body (D). Attach glass shades (E) over the sockets.Tighten socket rings (F) with socket ring fastener (CC) as needed.
Note : Do not overtighten.
- Unscrew the socket rings (F) from sockets on fixture body (D). Attach glass shades (E) over the sockets.Tighten socket rings (F) with socket ring fastener (CC) as needed.
-
Install light bulbs (not included). Use 60-watt max. standard-base incandescent bulbs or CFL/LED equivalents.
Questions, problems or missing parts?
Before returning, contact us on:
888-251-1026 , 8 a.m. – 8 p.m.,
EST, Monday – Sunday or ascs@lowes.com.