Wi-Tek WI-PCES306GF Cloud Easy Smart PoE Switch Installation Guide

Wi-Tek WI-PCES306GF Cloud Easy Smart PoE Switch

Specifications

• Model: WI-PCES306GF
• Ports:
  • 1 Gigabit Ethernet Port
  • 4 Gigabit PoE+ Ports
  • 1 Gigabit SFP Slot
• Power Input: 48-57V DC

FAQs

• Q: How do I reset the switch to factory default settings?
  • A: Press the reset button for over 5 seconds to restore the switch to its original factory default settings.
• Q: How do I bind the switch to the cloud management system?
  • A: To bind the switch successfully, ensure it is connected to the internet. Follow the cloud binding instructions provided in the user manual.
• Q: What is the default account information for cloud management access?
  • A: The default account for cloud management access is ‘admin’ with the password ‘admin’.

Package Contents

Hardware Introduction

Panel WI-PCES306GF

• Front Panel
• Back Panel

Panel WI-PCES308GF

• Front Panel
• Back Panel

LED Indicators

Button and Interface

• Reset Button
  • By pressing the button over 5s, the switch will be restored to the original factory default setting.
• Grounding
  • For better protection performance, it is recommended as follows.
  1. Do not damage the ground conductor or operate the device in the absence of a well-installed ground conductor. Conduct the appropriate electrical inspection.
  2. When operating the unit, always make the ground connection first and disconnect it at the end.
• Power Connection
  • This switch can work with 48~57V DC power, the DC power connection processes are as follows.
  1. Before installation, ensure that the device is disconnected from the power supply.
  2. Connect the 48~57V DC power adapter to the power input port of the switch.
  3. Turn on the DC power, and check if the power supply indicator (PWR) of the switch turns on, if the PWR indicator turns on, the power is connected correctly.

Installation

Desktop Installation

Wall-mount Installation

Configuration

First, the device is powered on, the internet is connected to the WAN port of the gateway, the other LAN port of the gateway is connected to the Cloud Easy Smart PoE Switch, and then the PC is connected to the switch. Make sure the PC and gateway are on the same subnet.

Log in to the switch locally

Let the Switch obtain an IP address and then check the DHCP server to see which IP address was assigned. The Switch is set to DHCP by default, so it will try to automatically obtain an IP address. If that fails, then it will use the default fallback IP address, 192.168.0.1

To log in, follow these steps:

1. Launch your web browser. Type the appropriate IP address in the address field.
2. The login screen will appear. Enter admin in the Username and Password fields. Login in

Cloud login switch configuration

1. Log in to the cloud management interface
   • (No account, you need to register an account to log in, The URL is: http://cloud2.wireless-tek.com)
2. Enter the cloud binding switch
   • ( explain: The switch must be connected to the Internet to bind successfully)
   • Please enter the device serial number to bind a device to the current group, the device can be 1 × Sw off when binding.
   • Explanation: The 17-digit SN code of the switch is shown on the sticker on the back of the switch as shown in the figure below.
3. After binding, you can use the Switch in the Tunnel option in the cloud management, and then choose to use EWEB or TELNET to enter the switch. The default account is admin and the password is admin.
   • ( Note: The EWEB channel can be created only when the easy smart switch is linked with the other type of Wi-Tek cloud management device, such as cloud L2, L3 management switch, gateway, wireless AP, etc.)

Warranty Card

• If the product is defective within three months after purchase, we will provide you with a new product of the same model.
• If the product defects within the three-year warranty period, we will provide professional maintenance service.
• Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
• Any other defects that are not caused by workmanship or product quality, such as natural disasters, water damage, or extreme thermal or environmental conditions.
• Sticker damage or warranty card loss will disqualify the product from a limited warranty.

CONTACT INFORMATION

• Wireless-Tek Technology Limited
• Address: Biaofan Technology Building 402, Bao’an street,
• Baoan District,Shenzhen City, Guangdong, China
• Website:www.wireless-tek.com
• Tel: 86-0755-32811290
• Email:sales@wireless-tek.com
• Technical Support: tech@wireless-tek.com.

References

• Wi-Tek Cloud
• Test and Measurement Equipment | Tektronix
• Wireless-Tek Technology Limited.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>