Sanyipace 9300D Pipe Sewer Pipeline Inspection Camera User Manual

Pipe Sewer Pipeline Inspection Camera
User Manual

Note

1. Please read this user manual carefully before using this product.
2. Do not throw or pressure with strength.
3. Do not dismantle the machine without permission.
4. Please copy your information before connecting the TF card.
5. Do not suddenly cut off the power during recording and playing. This may damage the product and video files.

Range of product use

1. pipe dredge machine.
2. Pipeline Inspection Camera 、 pipeline tools.
3. Underground pipeline, air conditioning pipe, oil and gas pipeline.
4. Rescue operations in a small space.
5. For underground expedition.
6. Underwater river bed scientific research.
7. downhole television.

Product specification

—Camera and cable –Sensor:1/3 CMOS
Camera diameter: 22MM.
Charger : 1000VAC-240VAC DC 12.6V 1000MA.
Battery: lithium battery 4500mAH.
Battery continuous working time: about 6-8 hours.
Max Inspection depth/material: 20M 30M 50M (optional)/high tenacity cable
Camera line source:6pcs 1W high white LED （adjustable ）.
Camera angle and clarity:145 degree /HD 1000TVL.
Camera shell material: stainless steel /IP68 waterproof camera.

—Display
–Monitor : 9-inch TFT color monitor
Function: video recording
Monitor input voltage:12V DC
TF card: packed with 8GB TF card, max support 32GB.
Display resolution：9 inch 16:9, 960480.
Menu Language： Chinese /English optional.
Display video format: AVI, marked with Year, Month, Date, Time, and Seconds
Display operate button.
Working temperature:-20-60 degrees.
Storage temperature:-30-80 degree.
Aluminum box size :4933.5*20(CM)

Product Details:

1. The 9’’ screen

USB Port: no use for DVR type device TF Card slot: support max 32GB micro SD card
2. Battery

3. Size of the camera probe and the cable coil

5. Accessories list :

• Aluminum box *1
• Charger *1
• Metal camera probe*1
• Cable reel and cable *1
• Battery*1
• User Manual *1
• Camera protective cover*1
• Pipe Pulley *1
• 9” Screen*1
• mini screwdriver*1
• connection cable

System install

1. Connect the charger to the battery, fully charged needs about 3-4 hours. With battery power display. Charging voltage DC12.6V.
2. Connect the device according to the below picture, then turn it on and use it.

The following are the steps to install the pulley

The following are the steps to install the protective case

Detailed operation

1. Turn on :
   Connect each connector, press the power button, and the system starts working.

2. Setting ：
   Press M to select what kind of setting you want to set, Press “+”/”-” to flip options. “REC/-” and “play/+” keys to decrease or add the sub-menu parameter setting.
   You can set language/image/storage/clock .

3. DVR: pres REC start recording, press REC again to exit.

4. Video Browsing: press MENU enters, then select the video to playback.

inch DVR display Instructions :

Functions and specifications:

1. Display:9inch ,16:9
2. Resolution:800*480
3. Power input: DC12V
4. Max support 32G Micro SD card
5. Language: Chinese / English
6. Video Format: AVI
7. Photo format: JPG

Recharge

When the battery power is low, please recharge it, the method is as below:

1. Take out the battery and charger from the box
2. Connect the charger to the battery (CHARGER), the recharge time is about 4-5 hours.
3.  Connect the charger to the alternating current of 110-240V. If the indicator shows red, it means recharging. If the indicator shows green, it means recharging is finished.
   Notes: To make the battery longer lifetime or avoid battery damage, please recharge it in time

Failure and Diagnosis

the camera needs to be tightened.
2: Check if the battery is fully charged and try again after it is fully charged.
No power| 1:Check whether each connector is connected correctly.
2:Battery is out of power? check the battery indicator
Can’t record| 1:Is the card inserted into the correct place
2:The new card is formatted
3:Whether the recording process is powered off
Can not be charged| 1:check the charger indicator light is on.
2:Is the DC plug inserted well?
The camera probe light up but
the screen shows ” no signal “| 1:Check if there are damage or rust on the camera probe end 2:Keep screwing the camera probe to the cable reel from loose to tight until it shows an image
3:Check if the cable between the screen and the battery is workable
4:You can use a voltage tester pen to test the parts of the device one by one, find out the damaged part and contact us for replacement.

—–Contact Us—-Go to our website to download use manual or check more Products: http://sanyipace.com/ Our Email: SanyiMrchan@gmail.com
We support spare parts replacing, please contact us at the first time when you got issues with our product.

Warranty

Fault description :

References

• Sewer Camera, Drain Camera for plumbing repair | SANYIPACE – Sanyipace

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>