OPT7 F150 Redline Easy Connect Expansion Adapter Harness Instruction Manual

OPT7 F150 Redline Easy Connect Expansion Adapter Harness

Product Specifications

• Product Name: Redline Expansion Adapter
• Compatibility: FOR FORD F150 2015-2020 with BLIS/BACKUP CAMERA/ASSIST SENSOR
• Features: Plug-and-play style, Flat 4-Pin Extension Adapter Harness, Easy Connect
• Dimensions: 3.94 inches x 110.23 inches x 3.94 inches
• Weight: 70.87 ounces

FAQ

Frequently Asked Questions

• Q: Is this product compatible with other vehicle models?
  • A: The Redline Expansion Adapter is specifically designed for FORD F150 2015-2020 with BLIS/BACKUP CAMERA/ASSIST SENSOR and may not be compatible with other models.
• Q: Can I cut or splice my factory harnesses when installing this adapter?
  • A: No, the Redline Easy Connect Expansion Adapter is designed for a plug-and-play installation without the need for cutting or splicing factory harnesses.

FOR FORD F150 (2015-2020) WITH BLIS/BACKUP CAMERA/ASSIST SENSOR

Hello Fellow OPT7-ites, Introducing the Redline Easy Connect Harness to Flat 4-Pin Extension Adapter Harness

DIMENSIONS

The OPT7 Redline Easy Connect Expansion Adapter Harness is purpose-built to be used as a trailer accessory for 15-20 F150 w/ BLIS.
It provides a plug-and-play style that allows you to quickly, seamlessly and virtually hidden installation without cutting or splicing your factory harnesses.

INSTALLATION

• Step 1
  • Open up your tailgate first.
  • Next, locate the two bolts that lock the tail light (See Figure 1) and loosen them.
• Step 2
  • Slowly move the loose tail light until it is completely removed(See Figure 2).
  • Important: There are two plastic clips on the inside of the tail light for fixing, please be careful not to break it when removing it.
• Step 3
  • Locate the OEM wiring harness (See Figure 3) and unplug it from the tail light assembly by lightly pressing the Release-Latch on the connector.

HOW TO CONNECT

PnP EXPANSION ADAPTER TO YOUR TAILLIGHTS

Step 4

• To make it easier for you to identify the signal location represented by the Connector /Wiring.
• Please read the relevant wiring instructions carefully before commencing any work.(See Figure 4)

Installation

• Step 5
  • Next, grab the Redline Easy Connect Expansion Adapter Harness and Plug it into the vehicle’s OEM wiring harness.
  • Plug the other end into the tail light connector (See Figure 5).
  • Route the Redline Easy Connect Expansion Adapter Harness from the left tail light opening to the right tail light opening, then repeat the same steps for the other side.
• Step 6
  • Use some zip ties to secure the flat 4PIN trailer connector and reverse wire in place along the inner bumper.
• Step 7
  • Finally, connect the available tailgate light bar to the 4PIN trailer connector and reverse wire for full functionality testing.

DISCLAIMER

• OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time.
• OPT7 Lighting assumes no responsibility for improper installation.
• If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.

OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>