CombiSteel 7455.0305 Professional Power Blender User Manual
- October 30, 2023
- CombiSteel
Table of Contents
Blender
7455.0305
User Manual
Important safety knowledge
-
Please do not immerse the pedestal or motor of the machine in water or other liquid.
-
Children can only use this machine under the supervision of adults to ensure safety.
-
Please first unplug the machine after using it, when removing its parts or before washing it.
-
Do not contact the rotating parts of the product especially the blade.
-
Do not operate the machine in any of the following cases:
a. The power line or plug is damaged
b. The product falls off and is damaged in the course of transportation. In this case, please send the machine to the nearest after-sales service point for repair. Do not disassemble it without permission. -
Do not use accessories that are not original ones of the machine for repair.
-
Do not hang the power line on desk or counter with cover to avoid the power line from being damaged.
-
Do not put the machine near gas appliance, electric gas appliance or other heating source.
-
Do not put hand or other appliance in the cup to start it in case personal injury might be caused or the machine might be damaged.
-
Please do not go away when using the machine. Shut it down while away from it.
-
Warning I: Since the blade is very sharp, please be careful during operation.
a. Never try moving the blade when the cup is still on the pedestal.
b. Do not use the machine when the blade is found loose, missing or damaged. Instead, replace the blade at once.
c. To avoid injury, do not use the machine when the blade assembly is not fully mounted to the cup.
Warning II: Do not open the cup cover and use mixing rod to mix food.
Correct using method: When using mixing rod, open the transparent lid in the middle of the cup cover and the mixing rod can be inserted into the cup safely for normal use. -
Do not overload the machine. Its maximum capacity should not exceed the top scale indicated on the cup.
The capacity should be relatively reduced for thick mixture. -
The lid must be covered during operation of the lid. The machine needs no special maintenance but washing.
If any repair of it is needed, send it to the designated place. Never repair it without permission. -
This machine has quick/slow start functions. Its effects can only be produced if the time is set first and gear is selected.
-
The rotation speed of this machine is high and very high heat can be generated during dry grinding. When the temperature of the food drily grinded reaches certain ignition point, it will spontaneously combust.
Therefore, dry grinding is not recommended.
ATTENTION!
During first use of this machine, you might smell unpleasant smell. This is
normal. As the motor runs, the smellwill disappear slowly.
Product specification
Before using this machine, please read this instruction carefully. Besides,
keep it properly for future reference.
Examine the rated working voltage to see if it is consistent with the voltage
in your home. The blender is composed of the following:
- Stirring up cover set
- Stirring cup
- Non-slip rubber mat
- Operation panel
- Mixing rod
Assembly of cover
The cover consists of two parts which makes it very easy for cleaning,
installation and sealing.
- To open the closely fit stirring cup cover (2), you only need to pull it upward. It will be covered if the pressed downward.
- To lock the transparent cover, you only need to insert aligned to the center slot of stirring cup cover (1) and rotate it clockwise. It will be unlocked if it is turned counterclockwise.
Panel description
- The speed regulator
- On/off
- Pulse
Operation guide
Preparation before operation
- Before operation, ensure the blender is power off.
- This device is equipped with magnetic induction safety switch. Please put the cup smoothly on the machine. Connect it to a power source. It can only work normally after the magnetic induction safety switch is activated.
- Put the processing material in the cup, Ensure its top is not higher than the “MAX” line and cover the lid.
Operation of special vegetable & fruit key
This machine is provided with one touch type “Vegetable & fruit key”. The
fruits and other materials are put into the cup according to the vegetable &
fruit making method introduced in the book “A Special and Natural Regimen”.
The operator only needs to press the “Vegetable & fruit key” and the making
of a whole cup of fruit juice can be finished.
If the vegetable or fruit in the blender cannot be blended during mixing, please check the following:
- If the quantity of water is enough
- If the volume of vegetable or fruit is too high
- If it is necessary to perform “instantaneous rotation” operation for several times
- If the blade gets loose
Usage features:| 7455.0305: Variable Speed control, Pulse and power switch.
KS-1053: Pro Nutrient extraction program, variable Speed with Timer, Pulse and
Infinity Controls.
Automatic Shut Off for Overload Protection.
No plunger needed.
---|---
Voltage:| 220V / 50HZ / 1500-2200W
Plug wire:| 1.2M / 602271EC 53(RVV) 300/500V 3xlmm2
Base size:| 208x219x219mm
Container:| Capacity: 2L| Rabbet size: 140x140x140mm
Height: 263mm
Net height:| 491mm
Single unit:| 479x298x329mm
Container:| Unbreakable Tritan Copolyester container. BPA free. Removable cap
for adding ingredients.
Base:| ABS raw material injection molding.
Motor:| Industrial single-phase universal motor. Model: 954511.
Blades:| Tungsten steel imported from Japan.
Container chassis:| 304 stainless steel.
Lids:| TPE injection molding materials by FDA test.
CTN weights (2 units):| 17.6kg
Single unit weight:| 8.3kg
CTN size:| 610x350x500mm
Best operating noise:| 70 to 75 (Dba) (with 1M distance)
Best RPM:| 45000 RPM
Product maintenance
Faults and their troubleshooting
| Fault description | Troubleshooting |
|---|---|
| 1 | The machine does not work. |
on.
| | 1- Remove the stirring cup and reposition it.
2| Loud work noise is produced.| 2- Examine the pedestal to see if it is put
on solid panel.
3| The blade does not rotate.| 1-Examine the power supply to see if it is
normal.
2-Examine the connector to if it fall off.
| | 1- Remove the stirring cup and reposition it.
4| The swing of the stirring cup is large.| 2- Shut down the machine and
remove the stirring cup
and see if there is any bulk matter in the cup.
| The stirring cup has the problem of| 1- Examine the screws at the bottom of
the stirring cup to
5| | see if they get loose.
| water leakage.| 2- Examine the seal ring to see if they fall off.
Cleaning
- Before cleaning, be sure to unplug the blender.
- Wipe the body and cover of the blender with sponge or duster cloth and then reverse it for airing.
- Warm water is recommended for its washing. Add some detergent to the water. Start the motor and after it rotates for 5s to 10s, pour the water and then flush the stirring cup, cup cover, etc. thoroughly with clean water. Reverse the blender and allow it to dry.
- Never wash the blender by putting the hand into it.
- Neutral detergent can be used to wipe the motor seat. Never use water to wash it. Then wipe it clean with dry cloth.
- Wash the seat and stirring cup separately.
- Do not immerse the seat in water or put it in dishwashing machine to wash it.
- Never clean the cutting tool in the blender with hand. Cleaning tools must be used to ensure safety.
Performance parameters
| Model: | 7455. |
|---|---|
| Product name: | Professional blender |
| Power: | 1500-2200W |
| Capacity: | 64 Ounce/2.0L |
| Voltage/frequency: | 220V — 50Hz |
| Material: | Copolyester environmental protection materials |
| Bearing: | High-precision spherical bearing |
| Wire: | 1.2m in length |
| Total height: | 466mm |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>