Treevol Furniture ALB 8991 Multistorage Cabinet User Guide

September 18, 2024
Treevol Furniture

Treevol Furniture ALB 8991 Multistorage Cabinet

ASSEMBLY INSTRUCTIONS

It’s much better if you get some company for this!

What will you need?

A flat, smooth surface. You can use the cardboard of the box or a rug.

An electric screwdriver isn’t necessary, but it can make the work much easier 🙂

Hi! my name is Armando, and I’ll be  with you while you assemble this cabinet.

Where should you start?

This is so IMPORTANT!

Over the next few pages is the panel and hardware content for this cabinet.

Please make sure that the quantity of each one is correct, and that everything is in good shape.

(When the cabinet is already assembled there’s no warranty for this)

Panel quantity

What’s in the hardware bag?

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

How do the dowels and Minifix system work?

This is so important too!

Everytime you’re using one of these connectors during the assembly, you should follow these same steps.

Wood dowels

They are little wooden cylinders.

Minifix system

It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

1. Let’s start assembling!

You can see the last page of this manual to have a full look of the panels of this cabinet.

KIT ANTIVUELCO

  1. Make a small hole on the top edge of the furniture top and fix one side of the strip with the 15mm screw and the washer.
  2. Stretch the strip and measure on the wall to drill.
  3. Drill a hole in your wall to a depth of 30mm using a 6mm drill bit.
  4. Insert the plastic wall anchor into the hole.
  5. Fix the other side of the strip with the screw and the washer.

After adjusting all the Minifix cams, cover them up with the cover caps.

After finishing the assembly, lift off al the adhesive letters.

How much weight does my cabinet resist?

Congratulations! It’s done

But don’t go yet!
There are some recommendations left for you to take care of your cabinet correctly from now on.

SUPER IMPORTANT!

We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone.
Be specially careful with the kids.

Taking care of your cabinet:

  • Do not paint the cabinet.
  • The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
  • Clean the metallic hardware with a dry cloth.
  • DO NOT overload the cabinet (see suggested loads)
  • Do not hit or hammer the cabinet (only when indicated here).
  • Clean it with thinner, a soft soap solution or simply a damp cloth.
  • Don’t drag the cabinet, lift it up with other people.
  • Avoid direct contact with water, fire or exposing it to high heat.

WARRANTY POLICY

Furniture has a 3 year warranty coverage in wooden parts and 1 year warranty coverage in hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet.

Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet.

This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.

This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc.

Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).

To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company.

There are no other warranties applicable to this product.

Specifications

  • Wood dowel: x34

  • Spreading bolt: x12

  • Minifix cam: x12

  • Cover caps: x16

  • Drywall screw: x4

  • Flat head screw: x16

  • Hinge + screws: x6

  • Steel Leg: x4

  • Handle: x2

  • Wall Fixing Kit + Screws

  • H profile: x1

FAQ

How much weight does the cabinet resist?

The weight capacity of the cabinet is specified to be [insert weight capacity here]. Please avoid exceeding this limit to prevent damage.

Can I use an electric screwdriver for assembly?

An electric screwdriver is not necessary but can make the assembly process faster. However, be cautious not to overtighten screws with it.

What should I do if I lose some hardware components?

If you lose any hardware components, please contact our customer support for assistance in obtaining replacement parts.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Treevol Furniture User Manuals

Related Manuals