Treevol Furniture WHFP076 Dresser Magness Installation Guide

Treevol Furniture WHFP076 Dresser Magness

Specifications

• Product: Dresser
• Assembly: Required
• Includes: Wall securing kit, hardware bag
• Tools Needed: Phillips head screwdriver, Flat head screwdriver, Hammer

Product Usage Instructions

What will you need?
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.

• Phillips head screwdriver
• Flat head screwdriver
• Hammer
• A flat, smooth surface (cardboard or rug)
• Electric screwdriver (optional)

What’s in the hardware bag?
Be careful not to lose anything from this bag, as its content is necessary for assembling your cabinet.

• Wood dowel x14
• Spreading bolt x31
• Minifix cam x31
• Cover caps x30
• Cover caps x5
• Handle x6
• Flat head screw x20
• Drywall screw x12
• Corners Bracket x2
• Wall fixing Kit + Screws x2
• H Profile x1
• Drawer slides + screws x3
• Nail x4, Steel egs x6, Flat head screw x30

How do the dowels and Minifix system work?
Every time you’re using one of these connectors during the assembly, follow these steps:

Wood Dowels

1. Put in the dowel inside the indicated hole.
2. Gently hit it until it’s fully inside.

Minifix System

1. Insert the Minifix cam with the arrow pointing towards the drilling on the panel’s edge.
2. Secure the joint by turning the spreading bolt.

FAQ

1. Q: Can I assemble the dresser without securing it to the wall?
   A: It is strongly recommended to secure the dresser to the wall using the provided anti-tip device to prevent tip-over  accidents.

2. Q: Do I need any additional tools for assembly?
   A: The necessary tools are listed in the manual. An electric screwdriver is optional but can make the assembly process easier.

ASSEMBLY INSTRUCTIONS

WARNING

Children have died from furniture tip over. To reduce the risk of tip over:

•  ALWAYS secure this furniture to the wall using an anti-tip device. NEVER allow children to stand, climb, or hang on drawers, doors or shelves.
• Do not defeat or remove the drawer interlock system.
• Place heaviest items in the lowest drawers.
• NEVER put a TV on this furniture.

To ensure the safety of those using this cabinet, it is crucial to properly secure it to the wall using a tip-over device. This product includes the necessary items for fixing the furniture to the wall. However, it is important to note that incorrect installation or failure to use the tip-over device can result in serious injury or even death.
For this reason, we highly recommend that a professional installer handle the installation of the cabinet to the wall.

What will you need?

Where should you start?

This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this cabinet.
Please make sure that the quantity of each one is correct, and that everything is in good shape.

(When the cabinet is already assembled there’s no warranty for this)

Panel quantity

• A – x1 B – x1 C – x1 D – x1
• E – x3 F – x3 G – x3 H – x3
• I – x3 J – x3 K – x2 L – x1

What’s in the hardware bag?

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

How do the dowels and Minifix system work?

this is so important too!
Everytime you’re using one of these connectors during the assembly, you should follow these same steps.

Wood dowels
They are little wooden cylinders.

1. Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
2. When joining two panels together, don’t forget to gently hit the panels to adjust the joint.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

1. This is a Minifix cam.
   It has a little arrow on its upper surface.

2. You should insert these cams with the little arrow pointing towards the drilling on the panel’s edge (shown on the left).

3. This is a spreading bolt.
   You should put it with the black plastic part facing down.

4. After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.

Let’s start assembling!

You can see the last page of this manual to have a full look of the panels of this cabinet.

Drawer slides installation
The wheel should go towards the front edge of the panel and facing down, like this:

Place the corner supports in the corners and screw with flat head screw 9/16″

To prevent furniture tip-overs, it’s important to properly install a tip-over device.
Here are the steps to secure the furniture to a wall:

1. Open the Tip-over prevention device that came with the product.

2. Measure the height of the furniture on the wall and mark it.

3. Measure the distance from the top of the furniture to where you plan to attach the tip-over device.

4. Using a stud finder, locate the studs in the wall behind the furniture. Mark their location with a pencil.

5. Hold the tip-over device in place on the furniture, aligning it with the marked location on the wall.
   Mark the position of the screw holes on the furniture..

6. Use a drill to make pilot holes in the furniture where you marked the screw holes.

7. Secure the tip-over device to the furniture.

8. Attach the tip-over device to the wall, making sure the screws go into the studs.

9. Test the tip-over device to ensure it’s properly installed by pushing and pulling on the furniture. If it’s secure, it should not tip over or shift..

After adjusting all the Minifix cams, cover them up with the cover caps.

After finishing the assembly, lift off al the adhesive letters. A

How much weight does my cabinet resist?

Congratulations!It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet correctly from now on.

SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone.
Be specially careful with the kids.

Taking care of your cabinet:

• Do not paint the cabinet.
• The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
• Clean the metallic hardware with a dry cloth.
• DO NOT overload the cabinet (see suggested loads)
• Do not hit or hammer the cabinet (only when indicated here).
• Clean it with thinner, a soft soap solution or simply a damp cloth.
• Don’t drag the cabinet, lift it up with other people.
• Avoid direct contact with water, fire or exposing it to high heat.

Cabinet panels

WARRANTY POLICY

• Furniture has a 1 year warranty coverage in wooden parts and hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet.
• Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet.
• This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.
• This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc.
• Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).
• To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company.
• There are no other warranties applicable to this product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>