Treevol Furniture WHFP066 Magness Nightstand B with Open Shelf and Drawer Installation Guide
- September 6, 2024
- Treevol Furniture
Table of Contents
Treevol Furniture WHFP066 Magness Nightstand B with Open Shelf and Drawer
Specifications
- Product: Tall Nightstand
- Assembly Required: Yes
- Materials: Wood
- Color: Varies
- Dimensions: Varies based on model
- Weight Capacity: Varies based on model
Product Usage Instructions
What You Will Need
Before you start assembling your Tall Nightstand, make sure you have the
following tools ready:
- Screwdriver
- Hammer
- Tape measure
- Assembly manual (included)
Assembly Process
- Identify all the parts included in the hardware bag.
- Familiarize yourself with the wood dowels and Minifix system.
- Follow the step-by-step instructions provided in the manual to assemble your nightstand.
- Ensure all panels are correctly aligned and secured using the dowels and Minifix system.
- Rotate the nightstand as needed during assembly to access all sides.
- Once assembled, check the weight capacity of your cabinet and avoid exceeding it.
Caring for Your Cabinet
To maintain your Tall Nightstand, regularly dust the cabinet panels with a
soft cloth. Avoid using harsh chemicals that may damage the wood finish.
Warranty Policy
Refer to the warranty policy provided with your Tall Nightstand for details on
coverage and terms.
FAQ
-
How much weight does my cabinet resist?
The weight capacity of your Tall Nightstand varies depending on the model. Refer to the product specifications for specific weight limits. -
Congratulations! It’s done – What does this mean?
This message signifies that you have successfully assembled your Tall Nightstand. Enjoy using your new furniture piece!
It’s much better if you get some company for this!
What will you need?
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this cabinet.
Please make sure that the quantity of each one is correct, and that everything
is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
What’s in the hardware bag?
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.
How do the dowels and Minifix system work?
This is so important too!
Everytime you’re using one of these connectors during the assembly, you should
follow these same steps.
Wood dowels
They are little wooden cylinders.
- Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
- When joining two panels together, don’t forget to gently hit the panels to adjust the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam
.
- This is a Minifix cam. It has a little arrow on its upper surtace.
- You should insert these cams with the little arrow pointing towards the drilling on the panel’s edge (shown on the left).
- This is a spreading bolt. You should put it with the black plastic part facing down.
- Atter joining two panels together you should turn the cams 180° with a Phillips head screwdriver to adjust and secure the joint.
ASSEMBLING INSTRUCTION
Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of
this cabinet.
How much weight does my cabinet resist?
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT! We suggest fixing the cabinet to the wall, so we can avoid
the cabinet tipping and harming anyone. Be specially careful with the kids.
Taking care of your cabinet
- Do not paint the cabinet.
- The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
- Clean the metallic hardware with a dry cloth.
- DO NOT overload the cabinet (see suggested loads)
- Do not hit or hammer the cabinet (only when indicated here).
- Clean it with thinner, a soft soap solution or simply a damp cloth.
- Don’t drag the cabinet, lift it up with other people.
- Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
WARRANTY POLICY
- Furniture has a 1 year warranty coverage in wooden parts and hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet.
- Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet.
- This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it’s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends.
- Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.
- This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc.
- Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).
- To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales recept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product’s original warranty coverage period. Damaged parts will become property of the company.
- There are no other warranties applicable to this product.